High-Lumen LED 9-Watt PAR30 Floods / Frosted Lens

High-Lumen LED 9-Watt PAR30 Floods / Frosted Lens
PAR30WF-9W-XxW-001A
Operates on 90-290VAC — 2500K Halogen or 5000K Pure White — 115º Wide Beam — E26 Screw Base
Direct Replacement of Halogen Lamps Up to 75 Watts – Uses Only 9 Watts – Up to 88% Energy Savings
CAUTION: Suitable for use in open luminaires (fixtures)
■FEATURES
■APPLICATIONS
Lamp Warranty: 3
Years
■■
Super Intensity: Up to
810 Lumens
■■
Track & Accent
Lighting
■■
Easy Installation:
Designed as a Direct
Retrofit into Most PAR30
Fixtures Using Existing
26mm-Base Sockets
■■
High CRI of 80 Enhances
All Colors
■■
■■
Solid Construction:
UV-Stabilized
Polycarbonate Frosted
Lens
Outdoor or Indoor
Flood Lighting (Not
Intended for Wet
Locations)
■■
Display Case Fixtures
& Cabinet Lighting
■■
Internal Security/
Emergency Lighting
■■
Museums & Galleries
Long Lifespan: White
LED Lumen Maintenance
Greater than 70%
at 50,000 Hours of
Operation (Rated average
■■
■■
■■
■■
life based on engineering
testing and probability
analysis)
■■
Wide Input Voltage
Range: 90-290VAC –
Adapts to Wide Range of
International Voltages
■■
Wide Viewing Angle:
115 Degrees
■■
Lighter Weight: Less
than 6 ounces
Solid-State: HighShock and HighVibration Resistant
■BENEFITS
Wide Operating
Temperature Range:
~-4°F to ~+104°F
[~-20°C to ~+40°C]
■■
Eco-Friendly: RoHS
Compliant
■■
■SPECIFICATIONS
PART NUMBER
Non-Dimmable
(On/Off Only)
SPECIFICATIONS SUBJECT
TO CHANGE WITHOUT NOTICE
■■
PAR30WF-9W-XxW-001A
90~290VAC [Tested @ 120VAC]
Viewing Angle
115° [Full Beam Width @ 50% Intensity]
CRI
80+
Power Factor
0.99
Ambient Operating Temp.
~-4°F to ~+104°F
~-20°C to ~+40°C
Base Type
E26 / E27 Screw-in
Body Color
Silver / White
SMD LEDs
LM80
Dimensions
L119.8mm x 095.5mm
Weight
0.36 lbs / 5.76 oz / 163.3 g
PART NUMBER
INPUT
CURRENT
ENERGY
USED
0.074 A
8.8 Watts
■■
Even Lighting: High
Intensity / No Halation
■■
Low Maintenance:
Sturdy Construction and
Longer Operational Life
Lower Costs by Reducing
Re-lamp Frequency
Environment-Friendly:
No Mercury Content, No
Lead
■■
Cool Operation: Doesn’t
Get Hot to the Touch /
Reduces Air Conditioning
Load
No Hazardous
Emissions: No UV or IR
Radiation – Does Not
Attract Insects; No RF
Interference
■■
Instant Light: No Flicker
or Delayed Startup Time
White LED technology is patent protected
in the United States. LEDtronics white LED products
are covered under these patents.
2.91” [73.9mm]
4.72” [119.8mm]
2.21”
60.9mm
3.76” [95.5mm]
EFFICACY
TOTAL
LUMENS
COLOR
TEMP.
EMITTED
COLOR
655 lm
196 cd
2500K~2700K
Halogen White
810 lm
234 cd
4500K~5500K
Pure White
HALOGEN WHITE
PAR30WF-9W-XHW-001A
74 lm/W
PURE WHITE
PAR30WF-9W-XPW-001A
© 2013 LEDtronics, Inc.
0.069 A
8.2 Watts
99 lm/W
ISO
9001:2008
CERTIFIED by DNV
COMPLIANT
CAUTION
✽✽ These models are for
use with standard
ON/OFF switches only,
not with a dimmer.
Use with any type
of dimmer, relay or
other current/voltage
control circuit device
will VOID WARRANTY.
✽✽ Suitable for use in
open luminaires
only. To prevent
overheating of the
lamp, which may
cause premature
failure, do not install
in totally enclosed
fixtures. Recessed
fixtures with some
type of venting
are recommended
for use with these
lamps. LED PAR Bulbs
must not exceed the
ambient operating
temperature range :
~-4°F to ~+104°F
[~-20°C to ~+40°C]
23105 Kashiwa Court, Torrance, CA 90505
Phone: (800) 579.4875 / (310) 534.1505
Fax: (310) 534.1424
E-mail: [email protected]
Website: ledtronics.com
Check LEDTRONICS.COM for latest data.
Printed material may be outdated.
MAXIMUM
CANDELA
Ideal for Use
with Alternate or
Renewable Energy
Resources – Solar &
Wind Power
LOG 433 / Rev 08 -2013
Input Voltage
Major Power Savings:
Up to 88% Less Energy
Usage Compared to
Filament Bulbs
w w w. L E D t r o n ic s . co m
■■
w w w. L E D t r o n ic s . c o m
■PHOTOMETRIC REPORTS
PAR30WF-9W-XHW-001A
PAR30WF-9W-XPW-001A
© 2013 LEDtronics, Inc.
Page 2
High-Power LED 9-Watt PAR30 Floodlights