HD74HC4040 12-stage Binary Counter REJ03D0647-0200 (Previous ADE-205-534) Rev.2.00 Mar 30, 2006 Description The HD74HC4040 is a 12-stage counter. This device is incremented on the falling edge (negative transition) of the input clock, and all its output is reset to a low level by applying a logical high on its reset input. Features • High Speed Operation: tpd (Clock to Q1) = 15 ns typ (CL = 50 pF) • High Output Current: Fanout of 10 LSTTL Loads • Wide Operating Voltage: VCC = 2 to 6 V • Low Input Current: 1 µA max • Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) • Ordering Information Part Name Package Type HD74HC4040P DILP-16 pin HD74HC4040FPEL SOP-16 pin (JEITA) Package Code (Previous Code) PRDP0016AE-B (DP-16FV) PRSP0016DH-B (FP-16DAV) Package Abbreviation Taping Abbreviation (Quantity) P — FP EL (2,000 pcs/reel) Note: Please consult the sales office for the above package availability. Function Table C X X: Irrelevant Rev.2.00 Mar 30, 2006 page 1 of 6 Reset Outputs State L L No change Advance to next stage H All outputs are low HD74HC4040 Pin Arrangement Q12 1 16 VCC Q6 2 Q6 Q5 3 Q7 Q12 Q11 15 Q11 Q5 Q10 14 Q10 4 Q7 Q8 13 Q8 Q4 5 Q4 Q9 12 Q9 Q3 6 Q3 Reset 11 R Q2 7 Q2 Clock 10 C GND 8 Q1 Q1 9 (Top view) Block Diagram Q1 Clock Q2 Q3 Q10 Q11 C Q C Q C Q C Q C Q C Q C Q R C Q R C Q R C Q R C Q R C Reset Timing Diagram Clock 1 2 Reset Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q10 Q11 Q12 Rev.2.00 Mar 30, 2006 page 2 of 6 4 Q12 8 16 32 64 128 256 512 1,024 2,048 4,096 R HD74HC4040 Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage range Input / Output voltage VCC VIN, VOUT –0.5 to 7.0 –0.5 to VCC +0.5 V V IIK, IOK IOUT ±20 ±25 mA mA ICC or IGND PT ±50 500 mA mW Input / Output diode current Output current VCC, GND current Power dissipation Storage temperature Tstg –65 to +150 °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Supply voltage Symbol VCC Ratings 2 to 6 Unit V Input / Output voltage Operating temperature VIN, VOUT Ta 0 to VCC –40 to 85 V °C tr , tf 0 to 1000 0 to 500 Input rise / fall time Note: *1 ns 0 to 400 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Conditions VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V Electrical Characteristics Item Input voltage Symbol VCC (V) VIH VIL Output voltage VOH VOL Input current Quiescent supply current Iin ICC Min Ta = 25°C Typ Max Ta = –40 to+85°C Unit Min Max 2.0 4.5 1.5 3.15 — — — — 1.5 3.15 — — 6.0 2.0 4.2 — — — — 0.5 4.2 — — 0.5 4.5 6.0 — — — — 1.35 1.8 — — 1.35 1.8 2.0 4.5 1.9 4.4 2.0 4.5 — — 1.9 4.4 — — 6.0 4.5 5.9 4.18 6.0 — — — 5.9 4.13 — — 6.0 2.0 5.68 — — 0.0 — 0.1 5.63 — — 0.1 4.5 6.0 — — 0.0 0.0 0.1 0.1 — — 0.1 0.1 4.5 6.0 — — — — 0.26 0.26 — — 0.33 0.33 6.0 6.0 — — — — ±0.1 4.0 — — ±1.0 40 Rev.2.00 Mar 30, 2006 page 3 of 6 Test Conditions V V V Vin = VIH or VIL IOH = –20 µA IOH = –4 mA V IOH = –5.2 mA Vin = VIH or VIL IOL = 20 µA IOH = 4 mA IOH = 5.2 mA µA Vin = VCC or GND µA Vin = VCC or GND, Iout = 0 µA HD74HC4040 Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Ta = 25°C Item Symbol VCC (V) Maximum clock frequency fmax Propagation delay time tPLH tPHL tPHL tPLH tPHL Removal time trem Pulse width tw Ta = –40 to +85°C 2.0 Min — Typ — Max 5 Min — Max 4 4.5 6.0 — — — — 25 29 — — 20 24 2.0 4.5 — — — 15 175 35 — — 220 44 6.0 2.0 — — — — 30 175 — — 37 220 4.5 6.0 — — 16 — 35 30 — — 44 37 2.0 4.5 — — — 18 200 40 — — 250 50 6.0 2.0 — — — — 34 100 — — 43 125 4.5 6.0 — — 4 — 20 17 — — 25 21 2.0 4.5 100 20 — — — — 125 25 — — 6.0 2.0 17 80 — — — — 21 100 — — 4.5 6.0 16 14 5 — — — 20 17 — — Output rise/fall time tTLH tTHL 2.0 4.5 — — — 5 75 15 — — 95 19 Input capacitance Cin 6.0 — — — — 5 13 10 — — 16 10 Unit Test Conditions MHz ns Clock to Q1 ns Clock to Q1 ns Reset to output ns Qn to Qn – 1 ns ns ns pF Test Circuit VCC VCC Input Pulse Generator Zout = 50 Ω Input Pulse Generator Zout = 50 Ω See Function Table Output Clock Q1 Output Reset CL = 50 pF Q12 CL = 50 pF Note : 1. CL includes probe and jig capacitance. Rev.2.00 Mar 30, 2006 page 4 of 6 HD74HC4040 Waveforms • Waveform – 1 tr tf VCC 90% 90% 50% 50% Clock 50% 10% 10% 0V tw tPLH tPHL 90% 50% Q1 VOH 90% 50% 10% 10% VOL tTHL tTLH Note : 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns • Wavwform – 2 tr tf 90% 50% Reset VCC 90% 50% 10% 10% tw 0V trem VCC 90% 50% Clock 10% 0V tPHL VOH 90% Any Q 50% 10% tTHL Note : 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns Rev.2.00 Mar 30, 2006 page 5 of 6 VOL HD74HC4040 Package Dimensions JEITA Package Code P-DIP16-6.3x19.2-2.54 RENESAS Code PRDP0016AE-B Previous Code DP-16FV MASS[Typ.] 1.05g D 9 E 16 1 8 b3 0.89 A1 A Z L Reference Symbol θ bp e e1 D E A A1 bp b3 c θ e Z L c e1 ( Ni/Pd/Au plating ) JEITA Package Code P-SOP16-5.5x10.06-1.27 RENESAS Code PRSP0016DH-B *1 Previous Code FP-16DAV Dimension in Millimeters Min Nom Max 7.62 19.2 20.32 6.3 7.4 5.06 0.51 0.40 0.48 0.56 1.30 0.19 0.25 0.31 0° 15° 2.29 2.54 2.79 1.12 2.54 MASS[Typ.] 0.24g D F 16 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 9 c HE *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 Z 8 e *3 bp x Reference Symbol M A L1 A1 θ y L Detail F Rev.2.00 Mar 30, 2006 page 6 of 6 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Dimension in Millimeters Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 7.50 7.80 8.00 1.27 0.12 0.15 0.80 0.50 0.70 0.90 1.15 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .6.0