ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 1 ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 11 Cannon Crimp, Size 20 Military/High Reliability D*MA Standard Density Crimp Contact Cable Connector Plug Shell Size DE DA DB DC DD • For contact cavity arrangements, see pages C-44. • For panel cutouts, see page C-49. Layout Dual Float Mount DEMAY9P DAMAY15P DBMAY25P DCMAY37P DDMAY50P Through Hole DEMA9P DAMA15P DBMA25P DCMA37P DDMA50P 9 14 25 37 50 Engaging Face Note: For residual magnetism level of 200 Gamma and shells and contacts with 50 micro inches (1,27m) gold plating, add NMBK52. Example: DEMA15PNMBK52. For connectors without contacts, add F0. Example: DEMA15PF0 (F0 not marked on connector). For crimp (Size 22) contacts and tooling, see page C-13. A C Ø 3,05 (.120) B 10° E K 8,76 (.345) MAX D W L F Dimensions Shell size DE DA DB DC DD A ± 0,38 (.015) B ± 0,13 (.005) C ± 0,13 (.005) D ± 0,13 (.005) E ± 0,38 (.015) F ± 0,25 (.010) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) 24,99 (8,36) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) • For contact cavity arrangements, see pages C-44. • For panel cutouts, see page C-49. Engaging Face Shell Size DE DA DB DC DD Layout 9 15 25 37 50 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Through Hole DEMA9S DAMA15S DBMA25S DCMA37S DDMA50S Dual Float Mount DEMAY9S DAMAY15S DBMAY25S DCMAY37S DDMAY50S Note: For residual magnetism level of 200 Gamma and shells and contacts with 50 micro inches (1,27m) gold plating, add NMBK52. Example DEMA9SNMBK52 with 50 microinches gold. For connectors without contacts, add F0. Example: DEMA9SF0 (F0 not marked on the connector). For crimp (Size 20) contacts and tooling, see page C-13. A C Ø 3,05 (.120) B 8,76 (.345) MAX D E K L W 10° Dimensions Shell size DE DA DB DC DD A ± 0,38 (.015) B ± 0,13 (.005) C ± 0,13 (.005) D ± 0,13 (.005) E ± 0,38 (.015) F ± 0,25 (.010) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com C D Sub Receptacle W K L ± 0,368 (.0145) ± 0,317 (.0125) ± 0,25 (.010) C-11 W K L ± 0,368 (.0145) ± 0,317 (.0125) ± 0,25 (.010) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) F ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 12 Cannon Crimp, Size 22 Military/High Reliability D*MA High Density Crimp Contact Cable Connector Plug Shell Size DE DA DB DC DD DF • For contact cavity arrangements, see pages C-44. • For panel cutouts, see page C-49. Engaging Face A C Ø 3,05 (.120) B 10° E Layout 15 26 44 62 78 104 Dual Float Mount DEMAY15P DAMAY26P DBMAY44P DCMAY62P DDMAY78P DFMA4104PF216 Through Hole DEMA15P DAMA26P DBMA44P DCMA62P DDMA78P DFMA104PF216 Note: For Residual Magnetism Level of 200 gamma, add B. Example DEMA15PNMB For shells with 50 microinches gold, add K52. Example: DEMA15PNMBK52. For connectors without contacts, add F0. Example: DEMA15PF0 (F0 not marked on connector) For crimp (Size 22) contacts and tooling, see page C-7. K 8,76 (.345) MAX D W L F Dimensions Shell A B C D E F W W K K L size ± 0,38 (.015) ± 0,13 (.005) ± 0,13 (.005) ± 0,13 (.005) ± 0,38 (.015) ± 0,25 (.010) ± 0,368 (.0145) ± 0,41 (.016) ± 0,317 (.0125) ± 0,25 (.010) ± 0,25 (.010) D Sub C DE 30,81 (1.213) DA 39,14 (1.541) DB 53,04 (2.088) DC 69,32 (2.729) DD 66,93 (2.635) DF (see Space Catalog) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) 6,693 (.2635) 6,693 (.2635) - 6.84 (.269) 6.84 (.269) 6.84 (.269) 1,206 (.0475) 1,206 (.0475) - 1,52 (.060) 1,52 (.060) 1,52 (.060) Receptacle • For contact cavity arrangements, see pages C-44. • For panel cutouts, see page C-49. Engaging Face Layout 15 26 44 62 78 104 Dual Float Mount DEMAY15S DAMAY26S DBMAY44S DCMAY62S DDMAY78S DFMA41045F216 Through Hole DEMA15S DAMA26S DBMA44S DCMA62S DDMA78S DFMA104SF216 Note: For residual magnetism level of 200 Gamma and shells and contacts with 50 micro inches (1,27m) gold plating, add NMBK52. Example DEMA15SNMBK52 contacts and shells with 50 microinches gold. For connectors without contacts, add F0. Example: DEMA15SF0 (F0 not marked on the connector). For crimp (Size 22) contacts and tooling, see page C-13. A C Ø 3,05 (.120) B 10° Shell Size DE DA DB DC DD DF 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) 8,76 (.345) MAX E K D W L F Dimensions Shell size DE DA DB DC DD A ± 0,38 (.015) B ± 0,13 (.005) C ± 0,13 (.005) D ± 0,13 (.005) E ± 0,38 (.015) F ± 0,25 (.010) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) 24,99 (8,36) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W K L ± 0,368 (.0145) ± 0,317 (.0125) ± 0,25 (.010) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions shown in inches (mm) Specifications and dimensions subject to change C-12 www.ittcannon.com ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 13 Cannon Crimp Contacts D*MA/D*A Combo Military/High Reliability MATERIALS AND FINISHES Contact Size 20 20-18 20-26 22D Wire Size Accom. 20, 22, 24 1 #18 & 2 #22 26, 28, 30 22, 24, 26, 28 Standard Finish Pin Socket 330-5291-000 031-1007-073 330-5291-001 031-1007-001 330-5291-004 031-1007-004 980-0008-878 980-0008-874 Military Finish Pin Socket 980-0009-472 980-0009-471 330-5291-055 031-1007-054 330-5291-050 031-1007-048 980-0008-878 980-0008-874 NMB Pin 330-5291-037 330-5291-108 330-5291-109 030-2042-002 Socket 031-1007-052 031-1007-091 031-1007-053 031-1147-002 MIL-C-39029 Cross-Reference Contact Size 20 Pin 20 Socket 22D Pin 22D Socket Wire Size Accomm. 20 / 22 / 24 20 / 22 / 24 24 / 26 / 28 22 / 24 / 26 / 28 M39029 / 64-369 / 63-368 / 58-360 / 57-354 Cannon Part No. 980-0009-472 980-0009-471 980-0008-878 980-0008-874 M24308 / 11-1 / 10-1 / 13-1 / 12-1 C AWG size 20 – 24 26 – 30 Pin Socket Pin Socket A ± 0,05 1,7 (0.067) 1,7 (0.067) 1,7 (0.067) 1,7 (0.067) B ± 0,05 1,0 (0.039) 1,0 (0.039) 0,6 (0.039) 0,6 (0.039) C max. 14,2 (0.559) 13,7 (0.539) 14,2 (0.559) 13,7 (0.539) CIET-20HD 2018 22D High Power High Volt AWG 20, 22, 24 26, 28, 30 1 #18 2 #22 22, 24, 26, 28 12, 16 #20 Plastic Insertion/Extraction Socket Pin CIET-20HD 980-2000-426 CIET-20HD 980-2000-426 None None None None CIET-22D 274-7048-000 CIET-12 274-7003-000 CIET-12 274-7003-000 Plastic Extraction Socket Pin CET-20-11 323-7010-000 CET-20-11 323-7010-000 CET-20-15 274-5016-002 CET-20-15 274-5016-002 None None None None None None Hand Crimp Tools Contact Size Wire Size AWG 20 20, 22, 24 2026 2018 22D 26, 28, 30 1 #18, 2 #22 22, 24, 26, 28 Crimp Tool Description Part Number M22520/2-01 995-0001-584 M22520/1-01 995-0001-585 M22520/2-01 980-2000-426 M22520/2-01 995-0001-584 M22520/2-01 995-0001-584 Assembly insructions see page C-44. For size 8 contacts, please refer to Combo D catalog or website. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com C-13 C D Sub Insertion/Extraction Tools Contact Size 20 2026 A B A B C Locator Description Part Number M22520/2-08 995-0001-604 TH25 995-0001-244 L3198-20HD 995-0001-325 K250 980-0005-722 M22520/2-06 995-0001-739 ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 14 Cannon Straight PCB, Size 20 Military/High Reliability Standard Density Straight PC Tail Plug • For contact cavity arrangements, see pages C-44. • For P.C. hole pattern, see pages C-45. • For panel cutouts, see page C-49. PC Tail Modifiers M Q 0L3 Layout 9 15 25 37 50 Through Hole DEM9PM* DAM15PM* DBM25PM* DCM37PM* DDM50PM* Dual Float Mount DEMY9PM* DAMY15PM* DBMY25PM* DCMY37PM* DDMY50PM* Note: For Residual Magnetism Level of 200 gamma, add NMBK52. Example DEMA15PMNMBK52 contacts and shells with 50 microinches gold. For alternate PC tail modifiers (see tabulation), replace 0L3 with M or Z. Example: DEM9PZNM ØY 0,76 ± 0,08 (.030 ± .003) 0,76 ± 0,08 (.030 ± .003) 0,60 ± 0,08 (.023 ± .003) X 4.01 ± 0,69 (.158 ± .027) 7,62 ± 0,5 (.300 ± .020) 4,82 ± 1,5 (.190 ± .020) Shell Size DE DA DB DC DD 0L3 for HE501 connectors and ESA equivalents Size D Engaging Face DD Configuration A 5,69 (.224) C B C 2,84 (.112) Ø 3,05 (.120) K D Sub E D L 10° Sizes E, A, B, C ØY X Dimensions Shell A B C D E F W W K K L size ± 0,38 (.015) ± 0,13 (.005) ± 0,13 (.005) ± 0,13 (.005) ± 0,38 (.015) ± 0,25 (.010) ± 0,368 (.0145) ± 0,41 (.016) ± 0,317 (.0125) ± 0,25 (.010) ± 0,25 (.010) DE DA DB DC DD 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) 24,99 (8,36) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) 6,693 (.2635) 6,693 (.2635) - 6.84 (.269) 6.84 (.269) 6.84 (.269) 1,206 (.0475) 1,206 (.0475) - 1,52 (.060) 1,52 (.060) 1,52 (.060) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions shown in inches (mm) Specifications and dimensions subject to change C-14 www.ittcannon.com ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 15 Cannon Straight PCB, Size 20 Military/High Reliability Standard Density Straight PC Tail Receptacle • For contact cavity arrangements, see pages C-44. • For P.C. hole pattern, see pages C-45. • For panel cutouts, see page C-49. PC Tail Modifiers M Q 0L3 X 4.01 ± 0,69 (.158 ± .027) 7,62 ± 0,5 (.300 ± .020) 4,82 ± 1,5 (.190 ± .020) Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DEM9SM DAM15SM DBM25SM DCM37SM DDM50SM Dual Float Mount DEMYSM DAMY15SM DBMY25SM DCMY37SM DDMY50SM Y Note: For residual magnetism level of 200 Gamma and shells and contacts with 50 micro inches (1,27m) gold plating, add NMBK52. Example DEMA15SMNMBK52 and shells with 50 microinches gold. For alternate PC tail modifiers (see tabulation), replace with OL3 or Z. Example: DEM9SZNM 0,76 ± 0,08 (.030 ± .003) 0,76 ± 0,08 (.030 ± .003) 0,60 ± 0,08 (.023 ± .003) Size D 0L3 for HE501 connectors and ESA equivalents DD Configuration Engaging Face 5,69 (.224) A 2,84 (.112) C Ø 3,05 (.120) B C K D Sub D E L 10° Sizes E, A, B, C 2,84 (.112) ØY X W F Dimensions Shell size DE DA DB DC DD A ± 0,38 (.015) B ± 0,13 (.005) C ± 0,13 (.005) D ± 0,13 (.005) E ± 0,38 (.015) F ± 0,25 (.010) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) 24,99 (8,36) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com C-15 W K L ± 0,368 (.0145) ± 0,317 (.0125) ± 0,25 (.010) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) ca_C1-C61.qxd:Layout 1 2/10/11 9:32 AM Page 16 Cannon Straight PCB, High Density Plug Military/High Reliability D-Subminiature High Density Straight PC Tail Plug • For contact cavity arrangements, see pages C-44. • For P.C. hole pattern, see pages C-47. • For panel cutouts, see page C-49. Shell Size DE DA DB DC DD PC Tail Modifiers M Note: For Residual Magnetism Level of 200 gamma, add NMBK52. Example DEMA15PMNMBK52 and shells with 50 microinches gold. For alternate PC tail modifiers (see tabulation), replace with OL3 or Z. Example: DEM15PZNM Q 0L3 X 4.01 ± 0,69 (.158 ± .027) 7,62 ± 0,5 (.300 ± .020) 4,82 ± 1,5 (.190 ± .020) Layout 15 26 44 62 78 Through Hole DEM15PM* DAM26PM* DBM44PM* DCM62PM* DDM78PM* Dual Float Mount DEMY15PM* DAMY26PM* DBMY44PM* DCMY62PM* DDMY78PM* 0L3 for HE501 connectors and ESA equivalents DD Configuration Engaging Face 3,96 (.156) A C 1,98 (.078) C B D Sub 10° K E D F L W Note: D size connectors have 4 rows of contacts F size connectors have 5 rows of contacts Ø 3,05 (.120) 0,51Ø (.020) X Dimensions Shell A B C D E F W W K K L size ± 0,38 (.015) ± 0,13 (.005) ± 0,13 (.005) ± 0,13 (.005) ± 0,38 (.015) ± 0,25 (.010) ± 0,368 (.0145) ± 0,41 (.016) ± 0,317 (.0125) ± 0,25 (.010) ± 0,25 (.010) DE DA DB DC DD DF 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) 69.34 (2.73) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) 55,0 (2.16) 24,99 (8,36) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 63,50 (2.50) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) 15,49 (0.61) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) 20,07 (0.79) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) 16,45 (.648) 6,693 (.2635) 6,693 (.2635) 6,94 (.273) 6.84 (.269) 6.84 (.269) 6.84 (.269) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 0.76 (.030) 1,52 (.060) 1,52 (.060) 1,52 (.060) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions shown in inches (mm) Specifications and dimensions subject to change C-16 www.ittcannon.com