Wireless Control Product Brief TDA525x Series

Product Brief
TDA525x Series
ASK/FSK Transceiver Family
Wireless Control – The TDA525x series is a family of low power single chip
FSK/ASK transceivers for half duplex low data rate communication in the
315 MHz, 434 MHz, 868 MHz and 915 MHz bands.
The IC offers a very high level of integration and needs only a few external
components. It contains a highly efficient power amplifier, a low noise amplifier
(LNA) with AGC, a double balanced mixer, a complex direct conversion stage,
I/Q limiters with RSSI generation, an FSK demodulator, a fully integrated VCO
and PLL synthesizer, a tuneable crystal oscillator, an onboard data filter, a data
comparator (slicer), positive and negative peak detectors, a data rate detection
circuit and a 2/3- wire bus interface. Additionally, there is a power down feature to
save battery power.
Applications
■ Low bitrate communication systems
■ Remote Keyless Entry (RKE) systems
■ Remote control systems
■ Alarm systems
■ Telemetry systems
■ Home automation systems
Ordering Information
Type
Ordering Code
Package
TDA5250
SP000012956
PG-TSSOP-38
TDA5251
SP000014554
PG-TSSOP-38
TDA5252
SP000057332
PG-TSSOP-38
TDA5255
SP000014555
PG-TSSOP-38
Evaluation Kits
Type
Description
Package
TDA5250-TDA5250
ASK/FSK
868 MHz
Q671000-H2058
TDA5251-TDA5251
ASK/FSK
315 MHz
Q67244-H112
TDA5252-TDA5252
ASK/FSK
915 MHz
SP000086721
TDA5255-TDA5255
ASK/FSK
434 MHz
Q67244-H61
www.infineon.com/wireless
Wireless Control
Features
■ Frequency ranges 315 MHz, 434 MHz,
868 MHz and 915 MHz
■ FSK and ASK operation
■ Fully integrated VCO and PLL
synthesizer and loop filter on-chip with
on chip crystal oscillator tuning
2
■ I C µController Interface
■ On-chip low pass channel select filter
and data filter with tunable bandwidth
■ Data slicer with self-adjusting threshold
and 2 peak detectors
■ FSK sensitivity < -109 dBm,
ASK sensitivity < -109 dBm
■ Transmit power up to +13 dBm
■ Data rates up to 64 kbit/s
Manchester Encoded
■ Self-polling logic with ultra fast
data rate detection
■ Power down mode with very low
supply current consumption
■ Low supply current
■ Supply voltage range 2.1 – 5.5 V
■ Temperature range -40°C … +85°C
Product Brief
fRF =
Single Ended to
Differential Conv.
fIF = 289.433 MHz
LNI 6
LNA
Mixer
LNI 7
Limiter
Data Filter
100 kΩ
Q
Channel
Filter
FSK
Limiter
+
-
QUADRI
Correlator
Mixer
17
BUSMODE
EN
BUSCLK
16
24
2
26
Controller
Interface
Slicer
27
+ Peak Det
– Peak Det
Tx/Rx
÷ 12/16
ANT
fTx = 868.3 MHz
fRx = 1157.73 MHz
9
GNDPA
PDP
12
PDN
Loop
Filter
VCC
6-bit
SAR-ADC
Tx/Rx
VCO
13
100 kΩ
ASK Data
÷2
ASK/FSK
100 kΩ
0˚
90˚
PA
Rx/Tx
4
ASK
RSSI
PA 10
PWD/DD
5
Wakeup
Logic
ASK/FSK
f = 289.433 MHz
÷4
Data
(Rx/Tx)
CLKDIV
28
Channel
Filter
LP
Filter
High/Low
Gain
BUSDATA
CQ2
CI2x
CI2
SLC
14
38 37 36 35 34 33 32 31
I
Mixer
CQ1x
VDD
(LNAPA) (Analog) (Digital)
11
1
15
CQ1
VCC
CI1x
868.3 MHz
VCC1
CI1
ANT
CQ2x
Block Diagram TDA5250
25
Bandgap
Reference
ASK/FSK
29
Reset
RSSI
CLK
Phase Det.
Charge P.
Crystal Osc, FSKMod, Finetuning
3
19
XOUT
21
XIN
20
XSWF
22
XSWA
FSK Data
23
XGND
LF
8
(LNA/PA)
GND1
30
18
(Analog) (Digital)
GND
VSS
fQ = 18.0896 MHz
Type
TDA5250
TDA5251
TDA5252
TDA5255
Frequency Range
868 – 870 MHz
312 – 325 MHz
910 – 920 MHz
433 – 435 MHz
Supply Voltage
2.1 – 5.5 V
2.1 – 5.5 V
2.1 – 5.5 V
2.1 – 5.5 V
Supply Current typ. @ 3 V
8.6 mA (ASK)
9.0 mA (FSK)
8.8 mA (ASK)
9.3 mA (FSK)
8.6 mA (ASK)
9.0 mA (FSK)
8.6 mA (ASK)
9.0 mA (FSK)
Sensitivity @ 4 kbit/s Manchester
-109 dBm (ASK/FSK) -109 dBm (ASK/FSK) -109 dBm (ASK/FSK) -109 dBm (ASK/FSK)
Rx
Tx
Supply Current typ. @ 3 V
11.9 mA
14.1 mA
12.5 mA
13.3 mA
RF Transmit Power typ.
9 dBm
9 dBm
9 dBm
9 dBm
Package
PG-TSSOP-38
PG-TSSOP-38
PG-TSSOP-38
PG-TSSOP-38
Temperature Range
-40°C … +85°C
-40°C … +85°C
-40°C … +85°C
-40°C … +85°C
How to reach us:
http://www.infineon.com
Published by
Infineon Technologies AG
81726 Munich, Germany
© Infineon Technologies AG 2006.
All Rights Reserved.
Legal Disclaimer
The information given in this Product Brief shall in no event be
regarded as a guarantee of conditions or characteristics
(“Beschaffenheitsgarantie”). With respect to any examples or hints
given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies
hereby disclaims any and all warranties and liabilities of any kind,
including without limitation warranties of non-infringement of
intellectual property rights of any third party.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Published by Infineon Technologies AG
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that
device or system.
Life support devices or systems are intended to be implanted in
the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume
that the health of the user or other persons may be endangered.
Ordering No. B138-H8371-G2-X-7600
Printed in Germany
PS 0107 nb