LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT TAPE AND REEL Pb Lead-Free Parts LPT9033/TR1 DATA SHEET DOC. NO : QW0905-LPT9033/TR1 REV. : E DATE : 04 -Dec. - 2012 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LPT9033/TR1 Page:1/5 Package Dimensions Collector 4.6±0.5 2.5 A0 K0 0.5±0.1 2.0 0.4±0.1 W1 ψ1.9 F E 1.4 2.8 P2 0.16 2 P t P0 D0 Collector 0.7 1 B0 W 0.4 1.EMITTER 2.COLLECTOR Note:1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted 2.Specifications are subject to change without notice •MAXIMUM RATINGS(Ta=25℃) PARAMETER MAXIMUM RATINGS UNIT 100 mw Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5 V Power Dissipation Operating Temperature -50℃ TO +100℃ Storage Temperature -50℃ TO +100℃ 260℃ for 5 seconds Lead Soldering Temperature(1.6mm From Body) •ELECTRICAL CHARACTERISTICS(Ta=25℃) Typ. UNIT TEST CONDITION 30 V Ic=1mA Ee=0mw/c㎡ 5 V IE=100μA Ee=0mw/c㎡ V Ic=0.5mA Ee=20mw/c ㎡ PARAMETER SYMBOL Min. Collector-Emitter Breakdown Voltage V(BR)CEO Emitter-Collector Breakdown Voltage V(BR)ECO Collector-Emitter Saturation Voltage VCE(sat) Max. 0.4 Rise Time Tr 5 μs Fall Time Tf 5 μs Collector Dark Current On State Collector Current ICEO Ip(on) 100 nA 1 2 mA 2 4 mA 4 8 mA 8 mA VCE =30V IC=800μA,RL=1KΩ VCE =10V Ee=0mw/c㎡ VCE =5v Ee=1mw/c㎡ λP=940nm LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LPT9033/TR1 Page:2/5 •Dimensions Symbol Information Symbol Dimension Length Ao 2.16 Width Bo Depth Pitch Compartment Carrier Tape Width Thickness Symbol Dimension Tol. ±0.2 Length Direction P2 2.0 ±0.2 4.85 ±0.2 Width Direction F 5.5 ±0.2 Ko 3.32 ±0.2 Symbol Dimension Tol. P 4.0 ±0.2 Diameter Do 1.5 ±0.2 Pitch Po 4.0 ±0.2 Distance E 1.75 ±0.2 Symbol Dimension Tol. W1 9.3 ±0.2 0.1 max Tol. Symbol Dimension Tol. W 12 ±0.3 t 0.3 ±0.2 Centers Line Sprocket Hole Fixing Tape Width Thickness •Configuration Of Reel And Flange Note:dimension in mm Symbol Dimension Tol. Diameter A 178 +0 -2 Space Between Flanges T 16 ±1 Key Slit Symbol Dimension Tol. Flange T C A B Width Hub Diameter Hub B 20 ±1.5 Symbol Dimension Tol. TRAILER LEADER Spindle Hole C 12.5 ±1 FIXING TAPE •Ordering Information Part No. Description Quantity/Reel LPT9033/TR1 12mm tape,7"reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LPT9033/TR1 Page 3/5 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150 ℃ 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (℃) 240 Cooling -5℃/sec Rising +5 ℃/sec Preheat 150 120 60 ~ 120 sec Time 5sec 3-2 PB-Free Reflow Solder 1~5°C/sec Preheat 180~200 °C 1~5° C/sec 260° C MaX. 10sec.Max Above 220 °C 60 sec.Max. 120 sec.Max. Reflow Soldering should not be done more than two times. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/5 PART NO.LPT9033/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃± 5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LPT9033/TR1 Page 5/5 Reliability Test: Classification Test Item Test Condition Reference Standard Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=1000hrs ±2hrs Endurance Test Thermal Shock Test Solderability Test Environmental Test Temperature Cycling IR Reflow 1.Ta=105 ℃±5 ℃&-40 ℃±5 ℃ (10min) (10min) 2.total 10 cycles 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface 1.105 ℃ ~ 25℃ ~ - 55℃ ~ 25℃ 30mins 5mins 30mins 5mins 2.10 Cyeles 1.T=260 ° C Max. 10sec.Max. 2. 6 Min MIL-STD-202F:103B JIS C 7021: B-11 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020