LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only ROUND TYPE LED LAMPS Pb Lead-Free Parts LWK73433Z-CW-D01 DATA SHEET DOC. NO : REV. DATE QW0905-LWK73433Z-CW-D01 : A : 14 - Jun. - 2011 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LWK73433Z-CW-D01 Page 1/6 Package Dimensions 4.8 5.8 R2.62 5.0 1.5 1.5MAX 25.0MIN ∅0.5TYP Zener 1.0MIN - + WK 2.54TYP + - Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation 0° -30° 30° -60° 100% 75% 50% 60° 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/6 PART NO. LWK73433Z-CW-D01 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT WK Forward Current IF 30 mA Peak Forward Current Duty 1/10@10KHz IFP 100 mA Power Dissipation PD 80≤PD≤120 mW Ir 10 μA Electrostatic Discharge( * ) ESD 8000 V Operating Temperature Topr -30~ +80 ℃ Storage Temperature Tstg -40~ +100 ℃ Reverse Current @5V Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic * glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) COLOR PART NO MATERIAL Emitted LWK73433Z-CW-D01 InGaN/GaN White Lens Water Clear Chromaticity CRI Coordinates @20 mA (Typ.) X Y 0.31 0.32 CCT @20 mA Forward Luminous Luminous Viewing intensity voltage intensity angle @20mA(V) @20mA(mcd) @20mA(LM) 2θ 1/2 (deg) Min. Min. Max. Min. Max. Min. 80 5650 7100 2.8 Typ. 3.5 1800 2200 Note : 1.The forward voltage data did not including ± 0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 3.The CRI data did not including ± 2% testing tolerance. Min. Typ. 5.5 5.7 110 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LWK73433Z-CW-D01 Page 3/6 . Chromaticity Coordinates Specifications for Bin Grading BIN W X X1 Y1 X2 Y2 X3 Y3 X4 Y4 WM 0.3290 0.3690 0.3290 0.3570 0.3150 0.3440 0.3140 0.3550 WN 0.3290 0.3450 0.3160 0.3330 0.3150 0.3440 0.3290 0.3570 WO WP 0.3290 0.3450 0.3290 0.3310 0.3170 0.3200 0.3160 0.3330 0.3290 0.3310 0.3290 0.3200 0.3180 0.3100 0.3170 0.3200 WQ 0.3185 0.3105 0.3290 0.3200 0.3300 0.3100 0.3200 0.3010 XM XN XO 0.3010 0.3420 0.3140 0.3550 0.3150 0.3440 0.3030 0.3330 0.3050 0.3220 0.3030 0.3330 0.3150 0.3440 0.3160 0.3330 0.3080 0.3110 0.3050 0.3220 0.3160 0.3330 0.3170 0.3200 XP 0.3080 0.3110 0.3170 0.3200 0.3200 0.3010 0.3110 0.2930 Note : 1.The Chromaticity Coordinates data did not including ±0.005 testing tolerance. . CIE Chromaticity Diagram 0.40 5650K 0.38 6300K 0.36 7000K WM y 0.34 XM WN XN WO 0.32 XO WP WQ XP 0.30 0.28 0.26 0.26 0.28 0.30 0.32 x 0.34 0.36 0.38 TC（K） 5650-6300K 6300-7000K LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/6 PART NO. LWK73433Z-CW-D01 Typical Electro-Optical Characteristics Curve WK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1 01 2.5 2.0 1.5 1.0 0.5 0.0 2.0 1.0 3.0 5.0 4.0 1 10 Fig.4 Relative Intensity vs. Temperature 1.2 Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 100 SPECTRAL RADIANCE 100 Intensity 80 60 40 20 0 600 Wavelength (nm) 700 2.5 2.0 1.5 1.0 0.5 0.0 -20 0 20 40 60 80 Ambient Temperature( ℃) Fig.5 Luminous Spectrum(Ta=25 ℃) 500 3.0 -40 Ambient Temperature( ℃) 400 1000 Forward Current(mA) Forward Voltage(V) -40 100 800 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LWK73433Z-CW-D01 Page 5/6 Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 °C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2° C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) Temp(° C) 260° C3sec Max 260° 5° /sec max 120° 25° 0° 0 2° /sec max Preheat 60 Seconds Max 50 100 Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 150 Time(sec) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LWK73433Z-CW-D01 Page 6/6 Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5 ℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hours. 1.Ta=105 ℃±5℃&-40 ℃±5℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5 ℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5 ℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11