LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD Pb Lead-Free Parts LG-008WK-DT-N12-A01 DATA SHEET DOC. NO : QW0905-LG-008WK-DT-N12-A01 REV. : C DATE : 02 - Sep. - 2014 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/13 PART NO. LG-008WK-DT-N12-A01 Features: 1. Side view white LED . 2. White SMT package. 3. Leadframe package with individual 2 pin. 4.Wide viewing angle. 5.Soldering methods:IR reflow soldering. 6.Feature of the device:more light due to higher optical efficiency;extremely wide viewing angle;ideal for backlighting and coupling in light guide. 7.Pb free Applications: 1. LCD back light. 2. Mobile phones. 3. Indicators. 4. Switch lights. Device Selection Guide: PART NO MATERIAL LG-008WK-DT-N12-A01 InGaN COLOR Emitted Lens White Yellow Diffused LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/13 PART NO. LG-008WK-DT-N12-A01 Package Dimensions 2.5 1.20 0.8 0.55 2.8 0.73 1.20 0.63 0.65 Cathode 0.43 Andoe Polarity Note : 1.All dimension are in millimeter tolerance is ± 0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 1.4 1 0.9 Note : The tolerances unless mentioned is ±0.1mm,Angle±0.5. Unit=mm. 1.4 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/13 PART NO. LG-008WK-DT-N12-A01 Absolute Maximum Ratings at Ta=25 ℃ Symbol Ratings UNIT Forward Current IF 30 mA Peak Forward Current Duty 1/10@10KHz IFP 100 mA Power Dissipation PD 108 mW Reverse Current @5V Ir 50 μA Electrostatic Discharge ESD 500 V Operating Temperature Topr - 20 ~ + 80 ℃ Storage Temperature Tstg - 30 ~ + 100 ℃ Parameter Typical Electrical & Optical Characteristics (Ta=25 ℃) Items Min. Luminous Intensity Symbol Min. Iv 1900 2000 X 0.287 Y Viewing Angle Max. UNIT CONDITION ---- mcd IF=20mA ---- 0.311 ---- IF=20mA 0.276 ---- 0.315 ---- IF=20mA VF 2.8 ---- 3.6 V IF=20mA 2θ 1/2 ---- 115 ---- deg IF=20mA Chromaticity Coordinates Forward Voltage Typ. Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2.The luminous intensity data did not including ±15% testing tolerance. 3.The color coordinates measurememt allowance is ±0.01 testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/13 PART NO. LG-008WK-DT-N12-A01 Luminous Intensity Classification BIN CODE W36W37 X11X12 X13X14 X15X16 X17X18 Iv(mcd) at20mA Min. Max. 1900 2000 2100 2200 2300 2000 2100 2200 2300 2400 Forward Voltage Classification BIN CODE 1 2 3 4 5 6 7 8 Vf(v) at 20mA Min. Max. 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/13 PART NO. LG-008WK-DT-N12-A01 Chromaticity Coordinates Specifications For Bin Grading Color Coordiante at20mA BIN CODE 1 X 3 2 Y X Y X Y B51 0.287 0.295 0.292 0.286 B52 0.292 0.286 0.296 0.276 0.304 0.285 B53 0.297 0.305 B54 0.3 0.3 0.3 4 X Y 0.295 0.297 0.305 0.3 0.295 0.295 0.309 0.305 0.307 0.315 0.295 0.304 0.285 0.311 0.294 0.309 0.305 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/13 PART NO. LG-008WK-DT-N12-A01 CIE Chromaticity Diagram 0.36 0.34 0.32 B53 0.30 B51 B54 B52 0.28 0.26 0.24 0.22 0.25 0.27 0.29 0.31 0.33 0.35 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/13 PART NO. LG-008WK-DT-N12-A01 Typical Electro-Optical Characteristics Curve WK CHIP Fig.2 Relative Intensity vs. Forward Current 3.0 1000 Relative Intensity Normalize @20mA Forward Current(mA) Fig.1 Forward current vs. Forward Voltage 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1 1.0 2.0 3.0 4.0 1 5.0 10 Fig.4 Relative Intensity vs. Temperature 1.2 Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 3.0 2.5 2.0 1.5 1.0 0.5 0.0 100 -40 DC Forward Current [mA] SPECTRAL RADIANCE 100 Intensity 80 60 40 20 0 600 Wavelength (nm) 700 0 20 40 60 80 100 Fig.6 Forward Current vs. Temperature Fig.5 Luminous Spectrum(Ta=25 ℃) 500 -20 Ambient Temperature( ℃) Ambient Temperature(℃) 400 1000 Forward Current(mA) Forward Voltage(V) -40 100 800 80 70 60 50 40 30 20 10 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature Ta (℃) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/13 PART NO. LG-008WK-DT-N12-A01 Carrier Type Dimensions 4.0±0.2 1.5 0.23 Cathode 1.75 3.5 8.0±0.3 5.3 Andoe 3.05 2.0 Polarity 1.35 0.95 4.0±0.2 Note : The tolerances unless mentioned is ±0.1mm,Angle ± 0.5. Unit=mm. ‧ Packing Specifications Label Aluminum Moist-Proof bag Label Part No. Description Quantity/Reel LG-008WK-DT-N12-A01 8.0mm tape,7"reel 3000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/13 PART NO. LG-008WK-DT-N12-A01 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb PART : LG-008WK-DT-N12-A01 BIN : Luminous Intensity LOT : GS11490168 HUE : Dominant Wavelength QTY(PCS): 3000 3.0 - 3.1 : Forward Voltage BIN/HUE : X1XX12/B54 VF:3.0-3.1 Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0±0.5 178±1.5 6.0±1.0 9.0±1.0 ψ13.5±1.0 12.0± 1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/13 PART NO. LG-008WK-DT-N12-A01 Box Explanation 1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 11/13 PART NO. LG-008WK-DT-N12-A01 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280°C 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec 120 ~ 150℃ Preheat 120 ~ 180 sec 3 PB-Free Reflow Solder 1~5°C/sec 1~5°C/sec Preheat 180~200°C 260°C MaX. 10sec.Max 6°C/sec Above 220°C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 12/13 PART NO. LG-008WK-DT-N12-A01 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃±5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forward current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 13/13 PART NO. LG-008WK-DT-N12-A01 Reliability Test: (1)Test items and results Test Item Classification Test Condition Sample Size Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs 22 High Temperature Storage Test 1.Ta=105 ℃± 5 ℃ 2.t= 500 hrs 22 Low Temperature Storage Test 1.Ta=-40 °C±5°C 2.t=1000 hrs 22 High Temperature High Humidity Storage Test 1.IR-Reflow In-Board, 2 Times 2.Ta= 8 5°C±5°C 3.RH=90 %~95 % 4.t= 500 hrs ±2hrs 22 1.IR-Reflow In-Board,2 times 2.Ta=105 ℃ ±5 ℃ & -40 ℃± 5 ℃ ( 30min) ( 30min) 3.total 100 cycles 22 1.T.Sol=260 ℃±5℃ 2.Dwell Time= 10 Max . 22 1.105 ℃ ~ 25 ℃ ~ - 40 ℃ 30mins 1 5mins 30mins 2.10 0 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Reflow Soldering Test Temperature Cycling (2)Criteria for judging the damage Item Symbol Test Conditions Criteria for Judgement Min. Max. Forward Voltage Vf If=20mA - U.S.L x1.2 Reverse Current Ir Vr=5V - U.S.L x2.0 Luminous Intensity Iv If=20mA L.S.L x 0.5 - Note: 1.U.S.L.:Upper Standard Level. 2.L.S.L.:Lower Standard Level.