SMLJ Series RoHS 2-16-07 - MDE

MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
SMLJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 170 Volts
3000 Watt Peak Pulse Power
FEATURES
• For surface mounted applications in order to
optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering:
250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
MECHANICAL DATA
Case: JEDEC DO214AB. Molded plastic over glass
passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bidirectional
Standard Packaging: 16mm tape (EIA STD RS-481)
Weight: 0.007 ounces, 0.21 grams)
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types SMLJ5.0 thru types SMLJ170 (e.g. SMLJ5.0C, SMLJ170CA)
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, 2, Fig.1)
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
Operatings and Storage Temperature Range
SYMBOL
VALUE
UNITS
PPPM
Minimum 3000
Watts
IPPM
SEE TABLE 1
Amps
IFSM
300
Amps
TJ, TSTG
-55 +150
°C
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
Certified RoHS Compliant
UL File # E223026
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
RATING AND CHARACTERISTIC CURVES SMLJ SERIES
Fig.2 - Pulse Derating Curve
Fig. 1 - Peak Pulse Power Rating Curve
100
Non-repetitive pulse
waveform shown in
Fig.3 TA = 25°C
Peak Pulse Power (PPP)
or Current (IPP)
Derating in Percentage,%
PPPM-Peak Pulse Power (kW)
100
10
1
87.5
75
62.5
50
37.5
25
12.5
0
0
0.1
0.1μs
1.0μs
10μs
100μs
1.0ms
25
50
75
100
125
150
175
200
TA - Ambient Temperature (°C)
10ms
td - Pulse Width (sec.)
150
tr = 10μsec.
Pulse Width(td)is defined
as the point where the
peak current decays to
50% of IPPM
Half Value- IPPM
2
1000
100
10/1000μsec.Waveform
as defined by R.E.A.
50
0
VR = 0
1000
VR = Rated
Stand-off
100
f = 1MHz
Vsig = 50mV p-p
TJ = 25°C
10
td
0
1.0
2.03.0
t - Time(ms)
3.0
1
4.0
4.0
10
10
10
5
500
1000
Fig.6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
60Hz
Resistive or
Inductive Load
7.0
100
VWM - Reverse Stand-Off Voltage (V)
Fig. 5 - Steady State Power
Derating Curve
8.0
300
8.3ms Single Half Sine-Wave
(JEDEC Method)TJ=TJ max.
6.0
250
5.0
4.0
200
3.0
2.0
150
1.0
0
IFSM-Peak Forward Surge
Current (A)
PM(AV),Steady State Power
Dissipation (W)
Unidirectional
Bidirectional
TJ = 25°C
Peak Value
IPPM
100
10000
CJ - Capacitance (pF)
IPPM - Peak Pulse Current,% IRSM
Fig. 4 - Typical Junction Capacitance
10000
Fig.3 - Pulse Waveform
0
25
50
75
100
125
150
TL - Lead Temperature (°C)
175
200
100
1
10
Number of Cycles at 60 Hz
100
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
3000 Watt Surface Mount TVS
UNI-POLAR
BI-POLAR
SMLJ5.0A
SMLJ6.0A
SMLJ6.5A
SMLJ7.0A
SMLJ7.5A
SMLJ8.0A
SMLJ8.5A
SMLJ9.0A
SMLJ10A
SMLJ11A
SMLJ12A
SMLJ13A
SMLJ14A
SMLJ15A
SMLJ16A
SMLJ17A
SMLJ18A
SMLJ20A
SMLJ22A
SMLJ24A
SMLJ26A
SMLJ28A
SMLJ30A
SMLJ33A
SMLJ36A
SMLJ40A
SMLJ43A
SMLJ45A
SMLJ48A
SMLJ51A
SMLJ54A
SMLJ58A
SMLJ60A
SMLJ64A
SMLJ70A
SMLJ75A
SMLJ78A
SMLJ85A
SMLJ90A
SMLJ100A
SMLJ110A
SMLJ120A
SMLJ130A
SMLJ150A
SMLJ160A
SMLJ170A
SMLJ5.0CA
SMLJ6.0CA
SMLJ6.5CA
SMLJ7.0CA
SMLJ7.5CA
SMLJ8.0CA
SMLJ8.5CA
SMLJ9.0CA
SMLJ10CA
SMLJ11CA
SMLJ12CA
SMLJ13CA
SMLJ14CA
SMLJ15CA
SMLJ16CA
SMLJ17CA
SMLJ18CA
SMLJ20CA
SMLJ22CA
SMLJ24CA
SMLJ26CA
SMLJ28CA
SMLJ30CA
SMLJ33CA
SMLJ36CA
SMLJ40CA
SMLJ43CA
SMLJ45CA
SMLJ48CA
SMLJ51CA
SMLJ54CA
SMLJ58CA
SMLJ60CA
SMLJ64CA
SMLJ70CA
SMLJ75CA
SMLJ78CA
SMLJ85CA
SMLJ90CA
SMLJ100CA
SMLJ110CA
SMLJ120CA
SMLJ130CA
SMLJ150CA
SMLJ160CA
SMLJ170CA
DEVICE
MARKING
CODE
UNI
BI
RDE
RDG
RDK
PDM
PDP
PDR
PDT
PDV
PDX
PDZ
PEE
PEG
PEK
PEM
PEP
PER
PET
PEV
PEX
PEZ
PFE
PFG
PFK
PFM
PFP
PFR
PFT
PFV
PFX
PFZ
PGE
PGG
PGK
PGM
PGP
PGR
PGT
PGV
PGX
PGZ
PHE
PHG
PHK
PHM
PHP
PHR
DDE
DDG
DDK
DDM
DDP
DDR
DDT
DDV
DDX
DDZ
DEE
DEG
DEK
DEM
DEP
DER
DET
DEV
DEX
DEZ
DFE
DFG
DFK
DFM
DFP
DFR
DFT
DFV
DFX
DFZ
DGE
DGG
DGK
DGM
DGP
DGR
DGT
DGV
DGX
DGZ
DHE
DHG
DHK
DHM
DHP
DHR
REVERSE BREAKDOWN BREAKDOWN
TEST
VOLTAGE CURRENT
VOLTAGE
STANDOFF
VBR (V)
VBR (V)
VOLTAGE
(IT )
VRWM (V)
MIN. @ IT
MAX. @ IT
mA
5.00
6.00
6.50
7.00
7.50
8.00
8.50
9.00
10.00
11.00
12.00
13.00
14.00
15.00
16.00
17.00
18.00
20.00
22.00
24.00
26.00
28.00
30.00
33.00
36.00
40.00
43.00
45.00
48.00
51.00
54.00
58.00
60.00
64.00
70.00
75.00
78.00
85.00
90.00
100.00
110.00
120.00
130.00
150.00
160.00
170.00
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
For bidirectional type having Vrwm of 10 volts and less, the IR limit is double
For parts without A, the VBR is ± 10%
Certified RoHS Compliant
UL File # E223026
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
REVERSE
MAXIMUM
PEAK
CLAMPING
PULSE LEAKAGE
VOLTAGE CURRENT @ VRWM
@IPP VC (V)
IPP (A)
IR (µA)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
326.1
291.3
267.9
250.0
232.6
220.6
208.3
194.8
176.5
164.8
150.8
139.5
129.3
123.0
115.4
108.7
102.7
92.6
84.5
77.1
71.3
66.1
62.0
56.3
51.6
46.5
43.2
41.3
38.8
36.4
34.4
32.1
31.0
29.1
26.5
24.8
23.8
21.9
20.5
18.5
16.9
15.5
14.4
12.3
11.6
10.9
800
800
500
200
100
50
20
10
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2