1.6x0.8x0.5mm BI-COLOR SURFACE MOUNT LED ATTENTION Part Number: APHB1608ZGSYKC OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Green Super Bright Yellow Features Description z 1.6mmX0.8mm SMT LED, 0.5mm thickness. The Green source color devices are made with InGaN z Compatible with reflow soldering. on Sapphire Light Emitting Diode. z Available in various color combination. The Super Bright Yellow device is made with AlGaInP (on z Package: 2000pcs / reel . GaAs substrate) light emitting diode chip. z Moisture sensitivity level : level 3. Static electricity and surge damage the LEDS. z Tinned pads for improved solderability. It is recommended to use a wrist band or anti-electrostatic z RoHS compliant. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK7902 REV NO: V.7B DATE: MAR/04/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011312 Selection Guide Part No. Dice Green (InGaN) APHB1608ZGSYKC Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 200 350 80 150 Water Clear Super Bright Yellow (AlGaInP) 2θ1/2 130° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 515 590 nm IF=20mA Green Super Bright Yellow 525 590 nm IF=20mA Spectral Line Half-width Green Super Bright Yellow 30 20 nm IF=20mA C Capacitance Green Super Bright Yellow 45 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Green Super Bright Yellow 3.3 2 4.1 2.5 V IF=20mA IR Reverse Current Green Super Bright Yellow 50 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Green Super Bright Yellow Units Power dissipation 102.5 75 mW DC Forward Current 25 30 mA Peak Forward Current [1] 150 175 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK7902 REV NO: V.7B DATE: MAR/04/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011312 APHB1608ZGSYKC Green SPEC NO: DSAK7902 REV NO: V.7B DATE: MAR/04/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011312 Super Bright Yellow SPEC NO: DSAK7902 REV NO: V.7B DATE: MAR/04/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011312 APHB1608ZGSYKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK7902 REV NO: V.7B DATE: MAR/04/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011312 PACKING & LABEL SPECIFICATIONS APHB1608ZGSYKC All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAK7902 REV NO: V.7B DATE: MAR/04/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011312