1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608MBC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6mmX0.8mm SMT LED, 0.75mm thickness. The Blue source color devices are made with GaN on SiC z Low power consumption. Light Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package: 2000pcs / reel . All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0933 REV NO: V.5 DATE: APR/03/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu PAGE: 1 OF 5 ERP: 1203001671 Selection Guide Part No. Dice APT1608MBC Lens Type Blue (GaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 4 10 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 430 nm IF=20mA Blue 466 nm IF=20mA Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 135 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0933 REV NO: V.5 DATE: APR/03/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu PAGE: 2 OF 5 ERP: 1203001671 Blue APT1608MBC SPEC NO: DSAD0933 REV NO: V.5 DATE: APR/03/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu PAGE: 3 OF 5 ERP: 1203001671 APT1608MBC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAD0933 REV NO: V.5 DATE: APR/03/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu PAGE: 4 OF 5 ERP: 1203001671 PACKING & LABEL SPECIFICATIONS APT1608MBC SPEC NO: DSAD0933 REV NO: V.5 DATE: APR/03/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu PAGE: 5 OF 5 ERP: 1203001671