AM27MGC09 - Kingbright

SUBMINIATURE SOLID STATE LAMP
Part Number: AM27MGC09
Mega Green
Features
Description
z Subminiature package.
The Mega Green source color devices are made with Al-
z Z-Bend lead.
GaInP on GaAs substrate Light Emitting Diode.
z Long life - solid state reliability.
z Low package profile.
z Package :1000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1337
REV NO: V.9
DATE: APR/14/2011
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: J.Yu
ERP: 1202000286
Selection Guide
Part No.
Dice
AM27MGC09
Iv (mcd) [2]
@ 20mA
Lens Type
Mega Green (AlGaInP)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
500
800
20°
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Mega Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
574
nm
IF=20mA
Mega Green
570
nm
IF=20mA
Spectral Line Half-width
Mega Green
26
nm
IF=20mA
C
Capacitance
Mega Green
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Mega Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Mega Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Mega Green
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1337
REV NO: V.9
DATE: APR/14/2011
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: J.Yu
ERP: 1202000286
Mega Green
AM27MGC09
SPEC NO: DSAD1337
REV NO: V.9
DATE: APR/14/2011
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: J.Yu
ERP: 1202000286
AM27MGC09
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAD1337
REV NO: V.9
DATE: APR/14/2011
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: J.Yu
ERP: 1202000286
PACKING & LABEL SPECIFICATIONS
AM27MGC09
SPEC NO: DSAD1337
REV NO: V.9
DATE: APR/14/2011
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: J.Yu
ERP: 1202000286