20.32mm (0.8INCH) 16 SEGMENT SINGLE DIGIT Part Number: PSC08-11EWA High Efficiency Red Features Description z 0.8 inch character height. The High Efficiency Red source color devices are made with z Low current operation. Gallium Arsenide Phosphide on Gallium Phosphide Orange z High contrast and light output. Light Emitting Diode. z Common cathode and common anode available. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123 Selection Guide Part No. Dice PSC08-11EWA Iv (ucd) [1] @ 10mA Lens Type High Efficiency Red (GaAsP/GaP) Description Min. Typ. 3600 7700 *900 *2100 White Diffused Common Cathode, Rt. Hand Decimal. Notes: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red 627 λD [1] Dominant Wavelength High Efficiency Red 625 Δλ1/2 Spectral Line Half-width High Efficiency Red C Capacitance VF [2] IR Max. Units Test Conditions *627 nm IF=20mA *617 nm IF=20mA 45 nm IF=20mA High Efficiency Red 15 pF VF=0V;f=1MHz Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. * Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123 High Efficiency Red PSC08-11EWA SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123 PACKING & LABEL SPECIFICATIONS PSC08-11EWA SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123 SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123