1.6x0.6mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APA1606PBC/A PRELIMINARY SPEC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6mmx0.6mm right angle SMT LED,1.2mm thickness. The Blue source color devices are made with InGaN z Low power consumption. on SiC Light Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package :2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF0553 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/28/2008 DRAWN: Ting.Li PAGE: 1 OF 5 ERP: 1203004224 Selection Guide Part No. Dice APA1606PBC/A Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 18 60 110° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF0553 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/28/2008 DRAWN: Ting.Li PAGE: 2 OF 5 ERP: 1203004224 Blue APA1606PBC/A SPEC NO: DSAF0553 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/28/2008 DRAWN: Ting.Li PAGE: 3 OF 5 ERP: 1203004224 APA1606PBC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF0553 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: OCT/28/2008 DRAWN: Ting.Li PAGE: 4 OF 5 ERP: 1203004224 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF0553 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu APA1606PBC/A DATE: OCT/28/2008 DRAWN: Ting.Li PAGE: 5 OF 5 ERP: 1203004224