GLASS PASSIVATED RECTIFIER 16AF05C THRU 16AF10C VOLTAGE RANGE 50 to 1000 Volts CURRENT 16.0 Ampere FEATURES • • • • • • ITO-220AB Glass passivated chip junction Low power loss, high efficiency Low leakage High current capacity, high surge capacity High temperature soldering guaranteed 200℃/10 second,0.16”(4.06mm)lead length from case MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Marked on package Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.064ounce, 1.81 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS 16AF05C 16AF1C Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current TA Tc=100℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) 16AF2C 200 140 200 16AF4C 400 280 400 16AF6C 600 420 600 16AF8C 16AF10C 800 1000 560 700 800 1000 UNIT Volts Volts Volts I(AV) 16.0 Amps IFSM 175 Amps Maximum Instantaneous Forward Voltage at 8.0A VF IR 1.1 10 300 Volts Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage per element TA = 125℃ CJ 55 pF RθJC TJ TSTG 2.5 (-55 to +150) (-55 to +150) ℃/W Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (NOTE 1) Operating Junction Temperature Range Storage Temperature Range Notes: 1. Unit mounted on heatsink Web Site: www.hkmic.com µA ℃ ℃ GLASS PASSIVATED RECTIFIER 16AF05C THRU 16AF10C VOLTAGE RANGE 50 to 1000 Volts CURRENT 16.0 Ampere RATING AND CHRACTERISTIC CURVES 16AF05C THRU 16AF10C FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 15 10 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 200 CURRENT, (A) PEAK FORWARD SURGE 20 (A) AVERAGE FORWARD CURRENT, FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 100 1 Cycle 0 0 25 50 100 75 175 150 125 0 1 2 AMBIENT TEMPERATURE, (° C) 4 6 8 10 40 20 60 100 NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 1.0 TJ =25° C Pulse Width=300us 1% Duty Cycle 0.1 0.4 0.8 1.6 1.2 INSTANTANEOUS FORWARD VOLTAGE,(V) INSTANTANEOUS REVERSE CURRENT, (μA) 100 (A) INSTANTANEOUS FORWARD CURRENT, 1000 100 TJ =125° C 10 1.0 TJ =25° C 0.1 0 20 40 60 80 100 FIG.5-TYPICAL JUNCTION CAPACITANCE PERCENT OF RATED PEAK 100 JUNCTION CAPACITANCE,(pF) REVERSE VOLTAGE,(%) 10 TJ =25° C f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVERSE VOLTAGE,(V) Web Site: www.hkmic.com 120 140