SCHTTKY BARRIER RECTIFIER SRB1020 THRU SRB10100 VOLTAGE RANGE 20 to 100 Volts CURRENT 10.0 Ampere FEATURES • • • • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MIL-S-19500/228 Low power loss, high efficiency Low forward voltage, high current capability High surge capacity For use in low voltage, high frequency inverters Free wheeling, and polarity protection applications MECHANICAL DATA • • • • • Case: TO-263( D2 –PAK)plastic Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: as marked Mounting position: Any Weight: 0.06ounce, 1.7 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRB SRB SRB SYMBOLS 1020 1030 1035 Maximum Repetitive Peak Reverse Voltage 20 30 35 VRRM Maximum RMS Voltage VRMS 14 21 25 Maximum DC Blocking Voltage VDC 20 30 35 Maximum Average Forward Rectified Current At Tc=100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) TC = 25℃ Typical Junction Capacitance(Note2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range SRB 1050 50 35 50 SRB 1060 60 42 60 SRB 1080 80 56 80 SRB 10100 100 70 100 UNIT Volts Volts Volts 10.0 Amps IFSM 150 Amps 0.65 IR TC = 100℃ SRB 1045 45 32 45 I(AV) VF Maximum Forward Voltage per at 10.0A per element Maximum DC Reverse Current at rated DC Blocking Voltage per element SRB 1040 40 28 40 CJ RθJC TJ TSTG Notes: 1. Thermal Resistance Junction to CASE 2. Measured at VR=4v and f=1MHz Web Site: www.hkmic.com 0.75 0.5 50 500 3.0 (-55 to +150) 0.85 Volts mA pF ℃/W ℃ SCHTTKY BARRIER RECTIFIER SRB1020 THRU SRB10100 VOLTAGE RANGE 20 to 100 Volts CURRENT 10.0 Ampere RATING AND CHRACTERISTIC CURVES SRB1020 THRU SRB10100 FIG.1-TYPICAL FORWARD CURRENT FIG.3-TYPICAL INSTANTANEOUS DERATING CURVE 4 2 50 100 CASE TEMPERATRUE ( ℃) 150 20 10 8 6 4 AMPERES 6 0 20,30,40V INSTNTANCEOUS FORWARD CURRENT, AMPERES AVERAGE FORWARD CURRENT, 8 0 FORWARD CHARACTERSTIC 40 10 80,100V 2 50,60V 1.0 0.8 0.6 Tj =25 ℃ Pulse Width=200 μs 0.4 0.2 0.1 0.4 0.5 0.6 0.7 0.8 0.9 1.1 1.0 INSTANTANEOUS FORWART VOLTAGE,VOLTS FIG.4-MAXIMUM NON-REPETITIVE SURGE CURRENT 150 FIG.2-TYPICAL REVERSE CHARACTERISTICS 130 8.3ms Single Half Sine-Wave JEDEC Method 100 10 90 70 50 30 20 TC=75 ℃ 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz 1.0 FIG.5-TYPICAL JUNCTION CAPACITANCE TC=25℃ 400 0.1 CAPACITANCE,pF INSTANTANEOUS REVERSE CURRENT, MILIAMPERES TC=100℃ CURRENT,AMPERES PEAK FORWARD SURGE 110 350 300 250 TJ =25 ℃ 200 0.01 0 100 120 200 300 150 REVERSE VOLTAGE VOLTS 1 2 5 10 20 50 100 REVERSE VOLTAGE,VOLTS Web Site: www.hkmic.com 200 500