GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC50005 THRU GBPC5010 VOLTAGE RANGE 50 to 1000 Volts CURRENT 50.0 Amperes GBPC35 FEATURES • • • • • • 1.135(28.8) 1.115(28.3) 0.72(17.1) Plastic package has UL flammability classification 94V-0 Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation High forward surge capacity Glass passivated chip junction High isolation voltage from case to lugs High temperature soldering guaranteed: 260℃/10 seconds, .632(16.1) AC + 1.135(28.8) .672(17.1) .582(14.8) 1.115(28.3) .632(16.1) .542(13.8) AC .732(18.6) .692(17.6) 0.094(2.4)DIA. .25(6.35) 0.034(.86) 0.030(.76) MECHANICAL DATA • • • • • Case:Epoxy, Molded Plastic with integrally mounted heatsink Terminals: Plated 0.25”(6.35mm) lug Polarity: Polarity symbols market on case Mounting: Thru hole for #10 screw, 20 in-lbs Torque max. See Note 3 Weight: 0.62 ounce, 17.5 gram .840(21.3) .740(18.8) .310(7.87) .290(7.36) .220(5.59) .100(5.08) METAL HEAT SINK HOLE FOR #10 SCREW Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS GBPC GBPC Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At TC=55℃ (SEE FIG.1) Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 25.0A TA = 25℃ Maximum DC Reverse Current at rated DC blocking Voltage per element T = 125℃ A Isolation Voltage from case to lug Typical Thermal Resistance (Note 1 and 2) Operating Junction Temperature Storage Temperature Range VRRM VRMS VDC GBPC GBPC GBPC GBPC GBPC 50005 5001 5002 5004 5006 5008 5010 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 UNIT Volts Volts Volts I(AV) 50 Amps IFSM 500 Amps I2 t 1037 A2s VF 1.1 Volts 5.0 1.0 2500 1.6 (-55 to +150) (-55 to +150) µA IR VISO RΘJC TJ TSTG Volts ℃/W ℃ ℃ Notes: 1.Unit mounted on 9”×3.5”×4.6”(23cm×9cm×11.8cm) AL Plate. 2.Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency with#10 screw Web Site: www.hkmic.com GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC50005 THRU GBPC5010 VOLTAGE RANGE 50 to 1000 Volts CURRENT 50.0 Amperes RATINGS AND CHARACTERISTICS CURVES GBPC50005 THRU GBPC5010 FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 700 45 Heat Sink Mounting 9" × 3.5" ×4.6" Thick (23×9×11.8cm) AL. Finned Plate 40 35 30 25 20 15 Single Phase Half wave 60Hz lnductive of Resistive Load 10 5 0 0 25 600 PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) 50 8.3ms Single Half-Wave (JEDEC Method) T j =Tj max 500 400 300 200 100 1 CYCLE 1 50 75 100 125 2 175 150 6 4 8 10 20 60 80 100 40 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE (℃) FIG. 3- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE LEMENT FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE LEMENT 100 INSTANTANEOUS REVERSE CURRENT, (μ A) INSTANTANEOUS FORWARD CURRENT, (A) 100 10 1.0 TJ =25℃ PULSE WIDTH=300 μs 1% DUTY CYCLE 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5- MAXIMUM POWER DISSIPATION AVERAGE POWER DIS SIPATION OF BRIDGE (W) 80 Tj =Tj max Capacitive Load 60 40 Resistive or Inductive Load 20 0 0 10 1.0 TJ =25℃ 0.1 0.01 0.01 0.4 100 TJ =100℃ 5 10 15 20 25 30 35 40 45 50 AVERAGE OUTPUT CURRENT, (A) Web Site: www.hkmic.com 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 120 140