EN4DSC Series - Hammond Manufacturing

www.hammondmfg.com
EN4DSC Disconnect Enclosures - NEMA 4
ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex™, Square D
Disconnect
Cutout Detail
Standards
Application
Wallmount Enclosures
Designed to house the following safety
disconnect equipment:
• ABB Controls flange mounted
variable depth operating mechanisms
for disconnect switches and circuit
breakers. Cable version for circuit
breakers also available.
• Allen Bradley 1494V variable depth
flange mounted disconnect switches
and circuit breaker operators NEMA
4 rated. Will not accept Allen Bradley
1494F disconnect switches, 1494D
circuit breaker operators or 1494V-R1,
-R2, or -W2 operating handles).
• Cutler Hammer C361 variable
depth flange mounted disconnect
switches and C371 circuit breaker
operators. Also Flex-Shaft™ handle
mechanisms for circuit breakers.
Use Cutler Hammer NEMA 4X rated
operating handles to maintain NEMA
4X integrity.
• Siemens I-T-E Max-Flex™ flange
mounted variable depth handles for
disconnect switch and circuit breakers. Use handle for NEMA 4 rating.
• General Electric Type STDA
flange handles and variable depth
operating mechanisms for disconnect
switches and circuit breakers. Also
SpectraFlex™ cable operators for
circuit breakers.
• Square D Class 9422 disconnect
switches with flange mounted variable
depth operating mechanisms or cable
mechanisms and Class 9422 flange
mounted variable depth operating
mechanism or cable mechanisms for
circuit breakers. SN4SS enclosures
will not accept Square D Class 9422
bracket-mounted disconnect devices,
9422TG1 or TG2 devices.
• UL 508 Type 3R, 4
• CSA Type 3R, 4
• Complies with
• NEMA Type 3R, 4, 12 and 13
• JIC EGP-1-1967
• IEC 60529, IP66
• Appropriate components are
required to maintain these
standards.
• Disconnects and operating
mechanisms are not provided with
the enclosure, and must be ordered
separately from the manufacturer.
Construction
Accessories
•
•
•
•
•
•
•
•
•
•
•
•
•
Finish
• Door and enclosure are finished in
recoatable smooth ANSI 61 grey
powder coating.
Formed 14 or 16 gauge steel.
Continuously welded seams.
Larger sizes include door stiffeners.
Formed lip on door and enclosure
exclude flowing liquids and
contaminants.
Cutouts and holes are provided to
suit the flange handle operating
mechanism.
Doors may be easily removed
for modifications and are
interchangeable.
Door is secured with easily
operated 2 or 3-point handle.
Cover interlock bracket is welded to
the door.
Collar studs are provided for
mounting inner panels.
Removable inner panel is sold
separately.
Seamless poured-in place gasket.
A bonding stud is provided on
the door and a grounding stud is
provided in the enclosure.
Includes hardware kit with panel
mounting nuts and sealing washers
for wall mounting holes.
Technical references and CAD downloads available at www.hammondmfg.com
151
Note:
•
•
•
•
•
•
•
•
•
•
Additional inner panels...see page 437
Air conditioners...see page 349-367
Blowers...see page 392
Breather kits...see page 400-401
Doorstop kits...see page 453
Filter fans...see page 371-384
Heaters...see page 393-396
Mounting foot kit...see page 31
Thermostats...see page 397
Window kits...see page 449
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
www.hammondmfg.com
EN4DSC Disconnect Enclosures - NEMA 4
ABB Controls, Allen Bradley, Cutler Hammer, General Electric, Siemens I-T-E Max-Flex™, Square D
Disconnect
Wallmount Enclosures
Part No.
EN4DSC20228GY
EN4DSC24228GY
EN4DSC24268GY
EN4DSC30268GY
EN4DSC36268GY
EN4DSC36328GY
EN4DSC423212GY
EN4DSC423812GY
EN4DSC483812GY
EN4DSC603812GY
Enclosure Size
AxBxC
20.00 x 22.00 x 8.00
24.00 x 22.00 x 8.00
24.00 x 26.00 x 8.00
30.00 x 26.00 x 8.00
36.00 x 26.00 x 8.00
36.00 x 32.00 x 8.00
42.00 x 32.00 x 12.00
42.00 x 38.00 x 12.00
48.00 x 38.00 x 12.00
60.00 x 38.00 x 12.00
Door
Body
Gauge Gauge
14
16
14
16
14
16
14
16
14
16
14
14
14
14
14
14
14
14
14
14
Optional
Panel
Part No.
EP2020
EP2420
EP2424
EP3024
EP3624
EP3630
EP4230
EP4236
EP4836
EP6036
Panel Size
DxE
18.17 x 18.17
22.17 x 18.17
22.17 x 22.17
28.17 x 22.17
34.17 x 22.17
34.17 x 28.17
40.17 x 28.17
40.17 x 34.17
46.17 x 34.17
58.17 x 34.17
Technical references and CAD downloads available at www.hammondmfg.com
Mounting
Latches
# Panel
GxH
Qty
Style Studs
18.50 x 20.50
1
2-pt
4
22.50 x 20.50
1
2-pt
4
22.50 x 24.50
1
2-pt
4
28.50 x 24.50
1
2-pt
4
34.50 x 24.50
1
2-pt
6
34.50 x 30.50
1
2-pt
6
40.50 x 30.50
1
3-pt
6
40.50 x 36.50
1
3-pt
8
46.50 x 36.50
1
3-pt
8
58.50 x 36.50
1
3-pt
8
J
5.00
6.00
6.00
6.00
6.00
6.00
21.00
21.00
24.00
30.00
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
152