E-Series I/Q Modulator — 410 - 430 MHz EKIN2-420X EKIN2-420X E-Series I/Q Modulator 410 - 430 MHz Features • • SM-92 Package High Carrier Suppression High 3I and 5I Suppression Note: Non Hermetic Package Description M/A-COM’s EKIN2-420X is a passive surface mount I/Q Modulator. Ideally suited for Direct Modulation in PMR/TETRA applications. Electrical Specifications @25°C Parameter Units Typical Minimum Maximum MHz MHz — — — — — — LO Carrier Suppression * dBc 30 22 — SSB Rejection * dBc 35 30 — Harmonic Suppression * 3 x I/Q 5 x I/Q dBc dBc 45 55 35 45 — — Conversion Loss dB 6.5 — 8.5 (LO) Carrier Power dBm +10 ± 1 — — I/Q Drive Level dBm -10.0 — — Frequency Range (LO) Carrier I/Q 410 - 430 DC - 2 * Note: When Q = -90 degrees relative to I: Lower sideband is suppressed. Related to wanted sideband power. V2.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. S 1407 B E-Series I/Q Modulator — 410 - 430 MHz EKIN2-420X Functional Configuration Operating Characteristics Impedance 50 Ohms Nominal Function Pin No. Parameter Absolute Maximum LO 1 Operating Temperature -10°C to +70°C RF 8 Storage Temperature -55°C to +100°C I 5 Pin Temperature (10 Sec) 260°C Q 6 External 50 Ohms — Case Ground 2,3,4,7 Not Connected — Typical Performance @ +25°C V2.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. S 1407 B