1N4933 thru 1N4937 Fast Switching Rectifiers Reverse Voltage 50 to 600V Forward Current 1.0A Feature & Dimensions * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Diffused junction * Capable of meeting environmental standards of MIL-S-19500 * 1.0 A operation at TA=75°C with no thermal runaway * For use in high frequency rectifier circuits * Fast switching for high efficiency * Typical IR less than 1.0µA * High temperature soldering guaranteed: 260°C/10 seconds * 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-41, molded plastic body We declare that the material of product compliance Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 with ROHS requirements Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 oz., 0.284 g Handling precautin:None 1.Maximum & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol Marking spec 1N 4933 1N 4933 1N 4934 1N 4934 1N 4935 1N 4935 1N 4936 1N 4936 1N 4937 1N 4937 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 V Maximum RMS voltage VRMS 35 70 140 280 420 V Maximum DC blocking voltage VDC 50 100 200 400 600 V Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 75°C IF(AV) 1.0 A IFSM 30 A IR(AV) 100 µA Typical thermal resistance (Note 2) RθJA 60 °C/W Operating junction and storage temperature range TJ, TSTG –50 to +150 °C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum full load reverse current, full cycle average,0.375"(9.5mm) lead lengths at TA = 55°C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA = 25°C at rated DC blocking voltage TA = 125°C symbol VF 1N 4933 1N 4934 1N 4935 1.2 1N 4936 1N 4937 Unit V IR 5.0 100 Typical reverse recovery time (Note 1) trr 150 ns Typical junction capacitance at 4.0V, 1MHz CJ 15 PF NOTES: 1. IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted µA 1N4933 thru 1N4937 2. Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 1.0 0.5 0.375" (9.5mm) Lead Length 0 Instantaneous Forward Current (A) 0 100 25 50 75 100 125 150 175 Ambient Temperature, °C 1.0 0.1 30 15 0 1 Tj=125℃ 10 Tj=75℃ 1 Tj=25℃ 0.1 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 5. –typical transient thermal impedance 1.0 0.1 100 100 0.01 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage (V) 10 10 Number of Cycles at 60Hz Fig 4. – Typical Reverse Characteristics Fig 6. – Typical Junction Capacitance Junction Capacitance (pF) Transient thermal impedance(°C/W) 0.01 0.6 100 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) Fig 3. – Typical Instantaneous Forward Characteristics TJ = 25°C Pulse width = 300µs 1% Duty Cycle 10 Average Forward Rectified Current (A) 60 Hz Resistive or Inductive Load Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 20 10 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 1.0 0.01 0.1 1.0 10 t,Pulse duration,sec 0.1 1 Reverse Voltage (V) 10 1N4933 thru 1N4937 3. dimension: 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 1 页 1 弹带盒装 ammo and box 1.1. 弹带盒规格 ammo spec. 单位：mm L W H T52 262±2 76±2 90±2 T42 T26 262±2 250±3 64±2 45±3 90±2 95±3 1.2 弹带内盒要求 inner box spec. ROHS标签 label LRC标签 label 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 2 页 1.4 标签要求 label spec. 1.4.1 LRC标签 LRC label ******* 成型规格forming spec. LRC产品型号 type 产品重复峰压值 peak repetive voltage **** 产品额定电流值 average output current ** 产品数量 quantity **** ******* 产品生产日期 date 1.4.2环保标签 environmental protection label 2.外箱规格 cartoon spec. 单位：mm H W L W H T52 430±2 280±2 225±2 T42 410±2 285±2 300±2 T26 435±3 280±3 295±3 外箱标签cartoon label L 3 按以上包装方式，编带数量和外包装箱产品数量：typing and cartoon spec. 塑封外型 A-405 & DO-41 & R-1 R-3 DO-15 DO-201AD 每根编带数量 quantity/ammo 3K 1.8K 2K(T52) 1.8K(T26) 0.8K 外箱数量（T52编带） quantity/cartoon 30K 18K 20K 8.0K 外箱数量（T26编带） quantity/cartoon 60K 36K 36K - 外箱数量（T42编带） quantity/cartoon 54K 32.4K 36K - 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 第 3 页 4 编带规格 brede spec 编带尺寸 typing dimension 尺寸代号 W 26/tape 35/tape 40/tape 26 0.0/+1.6 35 -1.0/+0.5 40 -1.0/+0.5 42/tape 52/tape 52/tape# 42 -1.0/+1.0 52 -1.0/+2.0 52 -1.0/+2.0 P 5±0.5 5±0.5 5±0.5 5±0.5 5±0.5 L1-L2 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 H 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 10±0.5 Z ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 R ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 T ＞3.5 ＞3.5 ＞3.5 ＞3.5 ＞3.5 注: 52编带# 为DO-201AD编带规格 "52编带#" just for D0-201AD ＞3.5 1. 红白编带厚度为0.05mm；两种胶带各自之间无明显色差；编带要求均为胶带。 The typing thickness is 0.05mm and color is obvious difference 2. 两端引带20~40cm. Typing lead over 20~40cm 3. 红色编带一端为二极管“负极”；白色编带一端为二极管“正极”。 red color is cathode ,white color is anode 4. 无卤 green epoxy compound（无卤产品才贴HF only） Green 1N4933 thru 1N4937 4. Update Record 版次 更新记录 更新作者 更新日期 1 第一版 周杰 2010-3-23 2 增加包装规范 周杰 2011-8-24