SF61G thru SF68G Glass Passivated Junction Ultra Fast Rectifiers Reverse Voltage 50 to 600V Forward Current 6.0A FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Glass passivated chip * Capable of meeting environmental standards of MIL-S-19500 * For use in high frequency rectifier circuits * Fast switching for high efficiency * High temperature soldering guaranteed: 260°C/10 seconds * 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC R - 6, molded plastic We declare that the material of product compliance Terminals: Plated axial leads, solderable per with ROHS requirements MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.042 oz., 1.19 g Handling precautin:None 1.Maximum & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol Marking spec SF61G SF62G SF63G SF64G SF65G SF66G SF68G Unit SF61G SF62G SF63G SF64G SF65G SF66G SF68G Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 600 Maximum RSM voltage VRSM 35 70 105 140 210 280 420 Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum DC blocking voltage temperature VDC 50 100 150 200 300 400 600 V V V IF(AV) 6.0 A IFSM 150 A TA 150 °C Typical thermal resistance (Note 2) RθJA 40 °C/W Operating junction temperature range TJ –50 to +150 °C Storage temperature range TSTG –50 to +150 °C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol Maximum instantaneous forward voltage at 6.0A Maximum DC reverse current TA = 25°C at rated DC blocking voltage TA = 125°C Typical reverse recovery time (Note 1) VF trr Typical junction capacitance at 4.0V, 1MHz CJ SF61G SF62G SF63G SF64G SF65G SF66G SF68G 0.95 1.25 1.7 10 100 35 IR 50 NOTES: 1. IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted Unit V µA ns 30 PF SF61G thru SF68G 2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 6.0 3.0 60 Hz Resistive or Inductive load TL=Lead Temperature with both leads heat sink mounted with length(L) as shown Instantaneous Forward Current (A) 100 100 0 25 50 75 100 125 150 175 Ambient Temperature, °C 1 Fig 3. – Typical Instantaneous Forward Characteristics 10 Number of Cycles at 60Hz 100 Fig 4. – Typical Reverse Characteristics 100 10 1.0 TJ = 25°C Pulse width = 300µs 1% Duty Cycle 0.1 0.01 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) 1.0 Tj=25℃ 0.1 0.01 Fig 5. –typical transient thermal impedance Tj=125℃ 10 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance Junction Capacitance (pF) 100 TJ = 75°C 8.3ms Single Half Sine-wave (JEDEC Method) 200 0 0 Transient thermal impedance(°C/W) Peak forward surge current (A) TA=Ambient Temperature 0.375"(9.5mm)Lead Lengh Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 10 1.0 SF61G~SF34G ---SF65G~SF68G 0.1 0.01 0.1 1.0 10 t,Pulse duration,sec 100 Reverse Voltage (V) SF61G thru SF68G 3. dimension: R-6 8.5 9.5 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 1 页 1 弹带盒装 ammo and box 1.1. 弹带盒规格 ammo spec. 单位：mm T52 1.2 弹带内盒要求 inner box spec. ROHS标签 label LRC标签 label L W H 262±2 76±2 90±2 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 2 页 1.4 标签要求 label spec. 1.4.1 LRC标签 LRC label ******* 成型规格forming spec. LRC产品型号 type 产品重复峰压值 peak repetive voltage **** 产品额定电流值 average output current ** 产品数量 quantity **** ******* 产品生产日期 date 1.4.2环保标签 environmental protection label 2.外箱规格 cartoon spec. 单位：mm H W T52 L W H 430±2 280±2 225±2 外箱标签cartoon label L 3 按以上包装方式，编带数量和外包装箱产品数量：typing and cartoon spec. 塑封外型 R-6 每根编带数量 quantity/ammo 0.4K 外箱数量（T52编带） quantity/cartoon 4.0K 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 第 3 页 4 编带规格 brede spec 编带尺寸 typing dimension 尺寸代号 52/tape# W 52 -1.0/+2.0 20±0.5 P L1-L2 ＜1.2 H 6±1.0 Z ＜1.0 R ＜1.0 ＞3.5 T 注: 52编带# 为DO-201AD编带规格 "52编带#" just for D0-201AD 1. 红白编带厚度为0.05mm；两种胶带各自之间无明显色差；编带要求均为胶带。 The typing thickness is 0.05mm and color is obvious difference 2. 两端引带20~40cm. Typing lead over 20~40cm 3. 红色编带一端为二极管“负极”；白色编带一端为二极管“正极”。 red color is cathode ,white color is anode 4. 无卤 green epoxy compound（无卤产品才贴HF only） Green SF61G thru SF68G 4. Update Record 版次 更新记录 更新作者 更新日期 1 第一版 周杰 2010-6-17