PLA110L

PLA110L
Single Pole, Normally Open
OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Ratings
400
150
25
Units
VP
mArms / mADC

Features
• Current Limiting
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Small 6-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Version Available
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket
Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Description
PLA110L is a current-limited, normally open
(1-Form-A) solid state relay that uses optically
coupled MOSFET technology to provide 3750Vrms of
input to output isolation.
Its optically coupled outputs, which use the patented
OptoMOS architecture, are controlled by a highly
efficient GaAIAs infrared LED.
The PLA110L can be used to replace mechanical
relays. It offers the superior reliability associated
with semiconductor devices, it has no moving parts,
and it offers faster, bounce-free switching in a more
compact surface mount or thru-hole package.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Ordering Information
Part #
PLA110L
PLA110LS
PLA110LSTR
Description
6-Pin Dip (50/Tube)
6-Pin Surface Mount (50/Tube)
6-Pin Surface Mount (1000/Reel)
Pin Configuration
AC/DC Configuration
+ Control
– Control
NC
1
6
2
5
3
4
Load
Do Not Use
Load
DC Only Configuration
+ Control
– Control
NC
1
6
2
5
3
4
+ Load
– Load
Switching Characteristics of
Normally Open Devices
Form-A
IF
90%
10%
ILOAD
ton
Pb
DS-PLA110L-R05
toff
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
PLA110L
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage Input to Output
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 6.67 mW / ºC
Ratings
400
5
50
1
150
800
3750
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Conditions
Symbol
-
IL
10ms
ILPK
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current, Continuous
AC/DC Configuration
DC Configuration
Peak
On-Resistance
AC/DC Configuration
DC Configuration
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Load Current Limiting
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
2
Min
Typ
Max
Units
-
-
150
250
-
mArms / mADC
mADC
mA
-
25
9
-

ILEAK
-
µA
VL=50V, f=1MHz
-
ton
toff
COUT
ICL
190
25
235
1
0.25
280
ms
ms
pF
mA
IL=150mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.4
0.9
-
0.7
1.2
-
5
1.4
10
mA
mA
V
µA
-
CI/O
-
3
-
pF
IL=150mA
IL=250mA
VL=400VP
IF=5mA, VL=10V
RON
www.ixysic.com
R05
INTEGRATED CIRCUITS DIVISION
PLA110L
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted) *
25
Device Count (N)
Device Count (N)
30
25
20
15
10
Typical Turn-On Time
(N=50, IF=5mA, IL=150mADC)
20
15
10
5
5
0
0
1.17
1.19
1.21
1.23
0.21
0.33
0.39
10
5
0.05
1.95
0.07
0.09
0.11
0.13
0.15
Turn-Off Time (ms)
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=150mADC)
35
30
20
15
10
5
25
20
15
10
5
0
0
1.65
5
0.45
Device Count (N)
15
1.35
10
Typical IF for Switch Dropout
(N=50)
Device Count (N)
Device Count (N)
0.27
25
20
1.05
15
Turn-On Time (ms)
Typical IF for Switch Operation
(N=50, IL=150mADC)
0.75
20
0
0.15
1.25
LED Forward Voltage Drop (V)
25
Typical Turn-Off Time
(N=50, IF=5mA, IL=150mADC)
25
Device Count (N)
35
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
0
0.75
2.25
1.05
1.35
1.65
1.95
2.25
13.1
13.7
14.3
14.9
15.5
16.1
On-Resistance (:)
LED Current (mA)
LED Current (mA)
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
441.5 450.5
459.5
468.5
477.5
486.5
Blocking Voltage (VP)
Typical Turn-On Time
vs. LED Forward Current
(IL=150mADC)
1.8
0.40
1.4
IF=50mA
IF=30mA
IF=20mA
IF=10mA
IF=5mA
1.2
1.0
0.8
0.10
Turn-Off Time (ms)
1.6
0.30
0.25
0.20
0.15
0.10
0.05
-20
0
20
40
60
Temperature (ºC)
80
100
120
0.08
0.06
0.04
0.02
0
0
-40
Typical Turn-Off Time
vs. LED Forward Current
(IL=150mADC)
0.12
0.35
Turn-On Time (ms)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop
vs. Temperature
0
5
10
15
20
25
30
35
Forward Current (mA)
40
45
50
0
5
10
15
20
25
30
35
40
45
50
Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R05
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
PLA110L
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted) *
Typical Turn-On Time
vs. Temperature
(IL=150mADC)
3.0
0.14
1.5
1.0
IF=5mA
IF=10mA
IF=20mA
0.5
0
-40
3.0
-20
0
20
40
60
80
100
0.10
0.08
0.06
0.04
0.02
15
10
5
-40
-20
0
20
40
60
80
-40
100
0
20
40
60
80
100
Temperature (ºC)
Temperature (ºC)
Typical IF for Switch Operation
vs. Temperature
(IL=150mADC)
Typical IF for Switch Dropout
vs. Temperature
(IL=150mADC)
Typical Load Current vs. Load Voltage
(IF=5mA)
3.0
150
1.5
1.0
0.5
Load Current (mA)
LED Current (mA)
2.5
2.0
1.5
1.0
-20
0
20
40
60
80
50
0
-50
-150
-2.5 -2.0 -1.5 -1.0 -0.5
0
100
100
-100
0.5
0
-40
-20
0
20
40
60
80
100
0.5 1.0 1.5 2.0 2.5
Temperature (ºC)
Load Voltage (V)
Maximum Load Current
vs. Temperature
Typical Blocking Voltage
vs. Temperature
Typical Leakage vs. Temperature
Measured Across Pins 4&6
0.030
200
150
100
IF=20mA
IF=10mA
IF=5mA
50
0
Leakage (PA)
0.035
475
Blocking Voltage (VP)
480
250
470
465
460
455
0
20
40
60
80
Temperature (ºC)
100
-40
120
0.025
0.020
0.015
0.010
0.005
450
-20
0
Temperature (ºC)
300
-40
-20
Temperature (ºC)
2.0
-40
20
0
0
120
2.5
LED Current (mA)
On-Resistance (:)
Turn-Off Time (ms)
Turn-On Time (ms)
2.0
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=150mADC)
25
0.12
2.5
Load Current (mA)
Typical Turn-Off Time
vs. Temperature
(IF=5mA, IL=150mADC)
-20
0
20
40
60
80
100
10s
100s
Temperature (ºC)
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
Energy Rating Curve
1.2
Load Current (A)
1.0
0.8
0.6
0.4
0.2
0
10Ps 100Ps 1ms 10ms 100ms
1s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R05
INTEGRATED CIRCUITS DIVISION
PLA110L
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
PLA110L / PLA110LS
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
PLA110L / PLA110LS
250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R05
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
PLA110L
Mechanical Dimensions
PLA110L
8.382 ± 0.381
(0.330 ± 0.015)
PCB Hole Pattern
7.239 TYP
(0.285 TYP)
2.54 ± 0.127
(0.100 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
Pin 1
7.620 ± 0.254
(0.300 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002)
0.254 ± 0.0127
(0.010 ± 0.0005)
6.350 ± 0.127
(0.250 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
4.064 TYP
(0.160 TYP)
Dimensions
mm
(inches)
0.457 ± 0.076
(0.018 ± 0.003)
PLA110LS
8.382 ± 0.381
(0.330 ± 0.015)
9.524 ± 0.508
(0.375 ± 0.020)
Pin 1
0.635 ± 0.127
(0.025 ± 0.005)
PCB Land Pattern
2.54 ± 0.127
(0.100 ± 0.005)
2.54
(0.10)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
Dimensions
mm
(inches)
1.651 ± 0.254
(0.065 ± 0.010)
6
www.ixysic.com
R05
INTEGRATED CIRCUITS DIVISION
PLA110L
PLA110LSTR Tape & Reel
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
K0 = 4.90
(0.19)
K1 = 3.80
(0.15)
P = 12.00
(0.472)
User Direction of Feed
Embossed
Carrier
Embossment
A0 = 10.10
(0.398)
Dimensions
mm
(inches)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
7
Specification: DS-PLA110L-R05
© Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012