high voltage power supply c11152 series

HIGH VOLTAGE POWER SUPPLY
C11152 SERIES
The C11152 series is a compact PC-board mountable
high voltage power supply, especially designed for photomultiplier tubes. The design offers better performance.
The C11152 and C11152-01 output negative polarity and
the C11152-50 and C11152-51 output positive polarity
high voltage.
FEATURES
● Low Ripple / Noise
● Compact and Lightweight
● High Stability
● High Voltage Monitor Output
● Ample Protective and Fail-safe Functions
SPECIFICATIONS
Parameter
Input Voltage Range
C11152
+15 ± 1
45
180
C11152-01
+12 ± 0.5
50
220
0 to -1500
-240 to -1500
C11152-50
C11152-51
+12 ± 0.5
+15 ± 1
50
45
180
220
0 to +1500
+240 to +1500
with no load
with full load
Variable Output Voltage Range
Specification Guaranteed Output Voltage Range
Max.
Output Current
1
Line Regulation Against ±1 V or ±0.5 V
Typ.
±0.01
Input Change AB
Load Regulation Against 0 % to 100 %
Typ.
±0.01
Load Change A
<5 kHz)
Typ.
Ripple / Noise (p-p) AB
5 (>5 kHz), 8 (=
Output Voltage Control
By external controlling voltage (0 V to +5 V) or external potentiometer (50 kΩ ± 2.5 kΩ)
Controlling Voltage Input Impedance Typ.
130
150
Typ.
Reference Voltage Output
+5.2 (with 50 kΩ external potentiometer)
Output Voltage Setting (Absolute Value) Typ.
(Controlling voltage × 300) ± 0.5 %
Output Voltage Rise Time (0 % ➝ 99 %) AB Typ.
120
Typ.
Temperature Coefficient AB
±0.005
High Voltage Monitor Output
0 to +5 (Output impedance 10 kΩ)
Inhibit Input
TTL logic level (Input impedance 30 kΩ)
Operating Ambient Temperature AB
0 to +50
Operating Ambient Humidity C
Below 80
Storage Temperature
-20 to +60
Storage Humidity C
Below 80
Weight
38
Units protected against reversed power input, reversed / excessive controlling
Protective Functions
voltage input, continuous overloading / short circuit in output
Input Current A
Typ.
AAt maximum output voltage.
BAt maximum output current.
Unit
V
mA
V
V
mA
%
%
mV p-p
—
kΩ
V
V
ms
% / °C
V
—
°C
%
°C
%
g
—
CNo condensation
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2012 Hamamatsu Photonics K.K.
HIGH VOLTAGE POWER SUPPLY C11152
Figure 1: Connection Diagrams
●OUTPUT VOLTAGE CONTROL
BY EXTERNAL VOLTAGE
●OUTPUT VOLTAGE CONTROL
BY EXTERNAL POTENTIOMETER
LOAD
LOAD
8
9
130 kΩ: C11152, C11152-01
150 kΩ: C11152-50, C11152-52
8
9
130 kΩ: C11152, C11152-01
150 kΩ: C11152-50, C11152-52
10 kΩ
1
2
3
4
5
6
10 kΩ
7
1
2
V
0 V to +5 V*
3
4
TTL logic High: HV-ON
TTL logic Low : HV-OFF
6
7
V
50 kΩ
+15 V
or +12 V
5
PIN ASSIGNMENT
1Vref (Reference Voltage Output)
2HV ADJ (Controlling Voltage Input)
3GND (Controlling Voltage GND)**
4Inhibit Input
5GND (+15 V or +12 V GND)**
6+15 V or +12 V Input
7HV Monitor Output
8HV Output
9GND (HV Output GND)
+15 V
or +12 V
TTL logic High: HV-ON
TTL logic Low : HV-OFF
* The instability in the external controlling voltage should be minimised as it directly affects the output voltage quality.
** Never connect the pin number 3 and 5 directly and externally.
TACCC0146EA
Figure 2: Output Voltage Controlling Characteristics
(C11152, C11152-01)
(C11152-50, C11152-51)
TACCB0113EA
+1800
-1500
+1500
-1200
+1200
-900
+900
-600
+600
-300
+300
0
0
1
2
3
4
5 5.3
6
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
-1800
0
CONTROLLING VOLTAGE (V)
Figure 3: Dimensional Outline (Unit: mm)
2.54 × 6
METAL HOUSING*
2.54
9
7.62 10.16
41.0 ± 0.5
8
0.64
13.97
41.0 ± 0.5
16.51
1 2 3 4 5 6 7
10
PIN ASSIGNMENT
1Vref (Reference Voltage Output)
2HV ADJ (Controlling Voltage Input)
3GND (Controlling Voltage GND)**
4Inhibit Input
5GND (+15 V or +12 V GND)**
6+15 V or +12 V Input
7HV Monitor Output
8HV Output
9GND (HV Output GND)
5±1
* The metal housing is internally connected to the GND.
** Never connect the pin number 3 and 5 directly and externally.
HAMAMATSU PHOTONICS K.K.
TACCA0306EB
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected]
TACC1053E01
China: HAMAMATSU PHOTONICS (CHINA) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]
JAN. 2012. IP