Leaded Resistors Surface Mount Resistors The industry’s broadest line of leaded resistors and networks includes designs with various material composition and structure for use in general purpose, precision, anti-surge, high voltage, high resistance applications. Flat chip resistors and arrays include general purpose, high precision, laser trimmable, audio and surge, high voltage, high heat and zero ohm types for applications ranging from general purpose to ultra precision. Carbon Film General Purpose - Reduced Size and Flame Proof CF/CFS/CFP Series • Power Rating: 0.25W ~ 0.5W • Resistance Range: 2.2Ω ~ 5.1MΩ • Tolerance: ±2% and ±5% Special Power Film High Power Resistor - SPR and SPRX Series • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 110KΩ • Tolerance: ±1% ~ ±5% Metal Film General Purpose - Reduced Size MF/MFS/RK Series • Power Rating: 0.25W ~ 1W • Resistance Range: 1Ω ~ 100MΩ • Tolerance: ±0.5% ~ ±5% Precision - RNS Series • Power Rating: 0.125W ~ 1W • Resistance Range: 0.2Ω ~ 6.8MΩ • Tolerance: ±0.1% ~ ±1% Radial-Precision - LF/LFF/RK26 Series • Power Rating: 0.125W ~ 0.5W • Resistance Range: 1Ω ~ 33MΩ • Tolerance: ±0.5% ~ ±5% Precision Metal Film - MRP Series • Pair Resistor • Resistance Range: 50Ω ~100kΩ • Tolerance: ±0.1% ~ ±1% • Tolerance Ratio: 0.025% ~ 0.5% Molded Precision - SF Series • Power Rating: 0.125W ~ 0.5W • Resistance Range: 100Ω ~ 5.11MΩ • Tolerance: ±0.01% ~ ±0.5% Wirewound Power and Small Type - CW/CWP Series • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 430Ω • Tolerance: ±0.25% ~ ±10% • CW1SSCT52A100J: UL1412 approved Precision Power Type - CW-H Series • CWH meets MIL-PRF-26 (U characteristics) • Power Rating: 1W, 2W, 3W • Resistance Range: 0.47Ω ~ 3kΩ Precision Power - RW Series • Power Rating: 0.5W ~ 10W • Resistance Range: 0.1Ω ~ 62kΩ • Tolerance: ±0.5% ~ ±5% Power Rectangular Type - BGR, BWR Series • BGR with glass core • BWR with ceramic core • Power Rating: 1W ~ 40W • Resistance Range: 0.1Ω ~ 390Ω • Tolerance: ±1% ~ ±10% Leaded SIP Networks Ultra Precision - MRS • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.01% ~ ±0.5% • T.C.R. up to ±2.5ppm/°C Thick Film - RKC/RKH/RKL Series • Number of Pins: 3 ~ 16 • Resistance Range: 22Ω ~ 2.2MΩ • Tolerance: ±1% ~ ±5% • Customs available: ±0.5% Resistive Film Protective Coating Metal Oxide General Purpose - MO/MOX Series • Power Rating: 0.5W ~ 3W • Resistance Range: 0.2Ω ~ 150kΩ • Tolerance: ±2% and ±5% Reduced Size - MOS/MOSX Series • Power Rating: 0.5W ~ 5W • Resistance Range: 0.1Ω ~ 100kΩ • Tolerance: ±1% ~ ±5% Power Rectangular Type - BSR Series • Power Rating: 2W ~ 20W • Resistance Range: 430Ω ~ 75kΩ • Tolerance: ±5% Trimming Line Marking Glass Coating Lead Frame Ceramic Substrate Inner Electrode Zero Ohm/Jumper Conformal Coated - Z Series • Max. Amperage: 1.5A, 2.5A • Resistance: less than 20mΩ Molded - J Series • Max. Amperage: 8A, 10A • Resistance: 10mΩ Max. Jumper Wire - JL Series • Max. Current Rating: 8A, 10A End Cap Lead Wire Molded Resin Solder Plated Copper Wire Get On-Board with KOA Speer Your Ideal Partner for Passive Component Solutions Inner Insulation Resistive Coating Outer Film Coating Resin As you search for surface mount passive components that will ensure the optimum performance of your circuit design, count on the broad line of products from KOA Speer. Our engineering teams are developing a wide range of new smaller sizes and integrated packages to accommodate higher clock speeds and product downsizing. Our world class manufacturing facilities are poised to ramp up with new designs, allowing us to take them to market with the shortest of lead times. And our sophisticated warehousing and distribution system ensures the availability of components when you need them. Inner Electrode Ceramic Substrate Terminal Ceramic Fixed Power - PCF Series • Power Rating: 0.5W ~ 2W • Resistance Range: 3.3Ω ~ 390kΩ • Tolerance: ±10% and ±20% Ceramic Fixed Power - HPC Series • Power Rating: 0.5W ~ 5W • Resistance Range: 3.3Ω ~ 390kΩ • Tolerance: ±10% and ±20% Linear Positive Miniature Tempco Thermistor - LT Series • Resistance Range:100Ω ~ 39kΩ • Tolerance: ±5% • T.C.R.: +1000 ~ +4500 ppm/°C • T.C.R Tolerance: ±10%, ±15% Precision Linear - LP Series • Resistance Range: 1Ω ~ 100kΩ • T.C.R. Tolerance: ±5% ~ ±10% • Tolerance: ±1%, ±2% and ±5% • T.C.R.: +150 ~ +5000 ppm/°C Current Sensing Rectangular Type BPR Series • Power Rating: 2W ~ 10W • Resistance Range: 0.01Ω ~ 1Ω • Tolerance: ±5% and ±10% Ceramic Case Cement Resistive Element Type J Ceramic Core Resistive Film Insulation Coating Specialty Fixed Anti-Surge - RCR Series • RCR50EN meets EN60065 requirements • Overload Voltage up to 5,000V • Power Rating: 0.25W ~ 3W • Resistance Range: 3.3Ω ~ 100MΩ • Tolerance: ±1% and ±5% High Voltage - GS Series • Max. Working Voltage: 0.5kV ~ 40kV • Power Rating: 0.25W ~ 12W • Resistance Range: 0.5MΩ ~ 10GΩ • Tolerance: ±0.5% ~ ±10% SIP High Voltage - RK92 Series • Max. Working Voltage: 1kV ~ 10kV • Power Rating: 0.5W ~ 1.1W • Resistance Range: 1MΩ ~ 1GΩ • Tolerance: ±1% ~ ±20% Thick Film Thin Film General Purpose - RK73B • NEW 01005 chip size: Resistance Range: NEW 4.7Ω ~ 1MΩ • Tolerance: ±2% and ±5% • Resistance Range: 1Ω ~ 22MΩ Precision - RK73H • NEW 01005 chip size, +1% • Tolerance: ±0.5% and ±1% • Resistance Range: 1Ω ~ 10MΩ High Precision - RK73G • T.C.R.: ±50 ppm/°C • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.5% and ±1% Audio Chip - RK73A • Low current noise • Clarity in signal processing • Resistance Range: 2.2Ω ~ 1MΩ • Tolerance: ±2% and ±5% Zero Ohm - RK73Z • 01005 chip size • Maximum Resistance of 50mΩ • Maximum Continuous Current @70°C: 0.5A ~ 2.0A Ultra Precision - RN73 • Tolerance: ±0.05% ~ ±1% • Nickel chromium resistor element • Resistance Range: 10Ω ~ 1MΩ • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/°C Ultra Precision - RN73H • Rated Ambient Temperature +85°C • NEW 0402 chip size: Resistance Range: up to 300KΩ • NEW 0603: Resistance Range: up to NEW 1MΩ • Oper. Temp. Range -55°C to +155°C • Improved moisture resistance • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.05% ~ ±1% • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/°C Resistor Array Solder Plating Ni Plating Protective Coating Solder Plating Resistive Inner Film Electrode Ceramic Substrate Ni Plating st Protective Coating Quality 1 Ceramic Substrate • Sizes available: 01005, 0201, 0402, 0603, 0805, 1206, 1210, 2010, 2512 It’s a Way of Life You expect product quality from any component that makes it into one of your designs. But in today’s competitive global marketplace, there’s so much more to the quality equation. At KOA Speer, we’ve launched our Quality 1st initiative to reinforce our organization wide focus on serving you at the highest possible level. And our commitment to quality in everything we do is paying off… in the pastSPEER two yearsELECTRONICS, we’ve received ten major KOA INC.customer quality awards. Bolivar Drive, P.O. Box 547 Bradford, PA 16701 USA Bolivar Drive, P.O. Box 547 Phone: 814-362-5536 Bradford, PA 16701 Fax: 814-362-8883 Phone: 814-362-5536 KOAwww.koaspeer.com SPEER ELECTRONICS, INC. Fax: 814-362-8883 CERTIFIED www.koaspeer.com AHA 2/13 2.5M ©2013 KOA Speer Electronics, Inc. Resistive Inner Film Electrode CERTIFIED Printed in U.S.A. • Sizes available: 0402, 0603, 0805, 1206, 1210 Melf Carbon Film/Metal Film/ Zero Ohm • RD41 Carbon Film Series • RN41 & RM41 Metal Film Series • CC Zero Ohm Series Linear Positive Tempco - MLT • Series with 6 specifiable temperature coefficients • Resistance Range: 10Ω ~ 43kΩ • Tolerance: ±2% and ±5% • T.C.R.: +2000 ~ 3900 ppm/°C Fixed Ceramic - CPCN • Series is reliable in pulse transient applications • Power Rating: 0.5W, 1W, 1.5W and 2W • Resistance Range: 1kΩ ~ 15kΩ • Tolerance: ±20% Concave, Square Corner Isolated Network - CN • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% ~ ±5% • Sizes available: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x4 elements Bussed Network - CNB • Resistance Range: 1kΩ ~ 470kΩ • Tolerance: ±5% • Sizes available: 4 or 8 elements included in one array Bussed Network - CND • Reverse common electrode and side electrode type circuits available • Resistance Range: 22Ω ~ 100kΩ • Tolerance: ±5% • Sizes available: 0603, 0805 and 1206 x8 elements Zero Ohm Jumper - CNZ • Current Rating @70°C (per element): 0.5A and 1.0A • Sizes available: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x4, x8 elements Convex, Scalloped Corner Isolated Network - CN_A • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603, 1206 x4 elements Convex, Square Corner Isolated Network - CN_N • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±5% • Sizes available: 0201 x2, x4 elements Isolated Network - CN_K • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603 x2, x4, x8 elements, 0402, 1206 x2, x4 elements Protective Coating Electrode Resistive Film Inner Electrode Ceramic Substrate Specialty Surge Current - SG73 • 10x pulse power capability • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±10%, ±20% • Sizes available: 0603, 0805, 1206, 1210, 2010, 2512 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate NEW Pulse SG73P and Highly ESD Proof SG73S • Superior surge withstanding voltage and pulse withstanding voltage • Resistance Range: 1Ω ~ 10MΩ • Tolerance: ±0.5% ~ ±5% • Sizes available: 0402, 0603, 0805, 1206, 1210, 2010, 2512 Voltage SG73S SG73P 0 100ms~1us 1us~1ms Time High Voltage - HV73 • 2x rated working voltage of standard thick film • Maximum Working Voltage: 350V, 400V, 500V, 2kV(d.c.) and 3kV(d.c.) • Resistance Range: 10kΩ ~ 51MΩ • Tolerance: ±0.5% ~ ±5% • Sizes available: 0603, 0805, 1206, 2010, 2512 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Wide Terminal - WK73 • Enhanced thermal performance • Power Rating: .75W, 1W & 1.5W • Resistance Range: 10mΩ ~ 1MΩ • Tolerance: ±1% and ±5% • T.C.R.: ±100, ±200, ±300 and ±800 ppm/°C • Size available: 0612, 1020, 1218, 1225 Anti-Sulfur • Excellent anti-sulfuration characteristics • High heat and weather resistance • Series available: RK73B, RK73H, CN, RK73Z, SG73 Leaded Resistors Surface Mount Resistors The industry’s broadest line of leaded resistors and networks includes designs with various material composition and structure for use in general purpose, precision, anti-surge, high voltage, high resistance applications. Flat chip resistors and arrays include general purpose, high precision, laser trimmable, audio and surge, high voltage, high heat and zero ohm types for applications ranging from general purpose to ultra precision. Carbon Film General Purpose - Reduced Size and Flame Proof CF/CFS/CFP Series • Power Rating: 0.25W ~ 0.5W • Resistance Range: 2.2Ω ~ 5.1MΩ • Tolerance: ±2% and ±5% Special Power Film High Power Resistor - SPR and SPRX Series • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 110KΩ • Tolerance: ±1% ~ ±5% Metal Film General Purpose - Reduced Size MF/MFS/RK Series • Power Rating: 0.25W ~ 1W • Resistance Range: 1Ω ~ 100MΩ • Tolerance: ±0.5% ~ ±5% Precision - RNS Series • Power Rating: 0.125W ~ 1W • Resistance Range: 0.2Ω ~ 6.8MΩ • Tolerance: ±0.1% ~ ±1% Radial-Precision - LF/LFF/RK26 Series • Power Rating: 0.125W ~ 0.5W • Resistance Range: 1Ω ~ 33MΩ • Tolerance: ±0.5% ~ ±5% Precision Metal Film - MRP Series • Pair Resistor • Resistance Range: 50Ω ~100kΩ • Tolerance: ±0.1% ~ ±1% • Tolerance Ratio: 0.025% ~ 0.5% Molded Precision - SF Series • Power Rating: 0.125W ~ 0.5W • Resistance Range: 100Ω ~ 5.11MΩ • Tolerance: ±0.01% ~ ±0.5% Wirewound Power and Small Type - CW/CWP Series • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 430Ω • Tolerance: ±0.25% ~ ±10% • CW1SSCT52A100J: UL1412 approved Precision Power Type - CW-H Series • CWH meets MIL-PRF-26 (U characteristics) • Power Rating: 1W, 2W, 3W • Resistance Range: 0.47Ω ~ 3kΩ Precision Power - RW Series • Power Rating: 0.5W ~ 10W • Resistance Range: 0.1Ω ~ 62kΩ • Tolerance: ±0.5% ~ ±5% Power Rectangular Type - BGR, BWR Series • BGR with glass core • BWR with ceramic core • Power Rating: 1W ~ 40W • Resistance Range: 0.1Ω ~ 390Ω • Tolerance: ±1% ~ ±10% Leaded SIP Networks Ultra Precision - MRS • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.01% ~ ±0.5% • T.C.R. up to ±2.5ppm/°C Thick Film - RKC/RKH/RKL Series • Number of Pins: 3 ~ 16 • Resistance Range: 22Ω ~ 2.2MΩ • Tolerance: ±1% ~ ±5% • Customs available: ±0.5% Resistive Film Protective Coating Metal Oxide General Purpose - MO/MOX Series • Power Rating: 0.5W ~ 3W • Resistance Range: 0.2Ω ~ 150kΩ • Tolerance: ±2% and ±5% Reduced Size - MOS/MOSX Series • Power Rating: 0.5W ~ 5W • Resistance Range: 0.1Ω ~ 100kΩ • Tolerance: ±1% ~ ±5% Power Rectangular Type - BSR Series • Power Rating: 2W ~ 20W • Resistance Range: 430Ω ~ 75kΩ • Tolerance: ±5% Trimming Line Marking Glass Coating Lead Frame Ceramic Substrate Inner Electrode Zero Ohm/Jumper Conformal Coated - Z Series • Max. Amperage: 1.5A, 2.5A • Resistance: less than 20mΩ Molded - J Series • Max. Amperage: 8A, 10A • Resistance: 10mΩ Max. Jumper Wire - JL Series • Max. Current Rating: 8A, 10A End Cap Lead Wire Molded Resin Solder Plated Copper Wire Get On-Board with KOA Speer Your Ideal Partner for Passive Component Solutions Inner Insulation Resistive Coating Outer Film Coating Resin As you search for surface mount passive components that will ensure the optimum performance of your circuit design, count on the broad line of products from KOA Speer. Our engineering teams are developing a wide range of new smaller sizes and integrated packages to accommodate higher clock speeds and product downsizing. Our world class manufacturing facilities are poised to ramp up with new designs, allowing us to take them to market with the shortest of lead times. And our sophisticated warehousing and distribution system ensures the availability of components when you need them. Inner Electrode Ceramic Substrate Terminal Ceramic Fixed Power - PCF Series • Power Rating: 0.5W ~ 2W • Resistance Range: 3.3Ω ~ 390kΩ • Tolerance: ±10% and ±20% Ceramic Fixed Power - HPC Series • Power Rating: 0.5W ~ 5W • Resistance Range: 3.3Ω ~ 390kΩ • Tolerance: ±10% and ±20% Linear Positive Miniature Tempco Thermistor - LT Series • Resistance Range:100Ω ~ 39kΩ • Tolerance: ±5% • T.C.R.: +1000 ~ +4500 ppm/°C • T.C.R Tolerance: ±10%, ±15% Precision Linear - LP Series • Resistance Range: 1Ω ~ 100kΩ • T.C.R. Tolerance: ±5% ~ ±10% • Tolerance: ±1%, ±2% and ±5% • T.C.R.: +150 ~ +5000 ppm/°C Current Sensing Rectangular Type BPR Series • Power Rating: 2W ~ 10W • Resistance Range: 0.01Ω ~ 1Ω • Tolerance: ±5% and ±10% Ceramic Case Cement Resistive Element Type J Ceramic Core Resistive Film Insulation Coating Specialty Fixed Anti-Surge - RCR Series • RCR50EN meets EN60065 requirements • Overload Voltage up to 5,000V • Power Rating: 0.25W ~ 3W • Resistance Range: 3.3Ω ~ 100MΩ • Tolerance: ±1% and ±5% High Voltage - GS Series • Max. Working Voltage: 0.5kV ~ 40kV • Power Rating: 0.25W ~ 12W • Resistance Range: 0.5MΩ ~ 10GΩ • Tolerance: ±0.5% ~ ±10% SIP High Voltage - RK92 Series • Max. Working Voltage: 1kV ~ 10kV • Power Rating: 0.5W ~ 1.1W • Resistance Range: 1MΩ ~ 1GΩ • Tolerance: ±1% ~ ±20% Thick Film Thin Film General Purpose - RK73B • NEW 01005 chip size: Resistance Range: NEW 4.7Ω ~ 1MΩ • Tolerance: ±2% and ±5% • Resistance Range: 1Ω ~ 22MΩ Precision - RK73H • NEW 01005 chip size, +1% • Tolerance: ±0.5% and ±1% • Resistance Range: 1Ω ~ 10MΩ High Precision - RK73G • T.C.R.: ±50 ppm/°C • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.5% and ±1% Audio Chip - RK73A • Low current noise • Clarity in signal processing • Resistance Range: 2.2Ω ~ 1MΩ • Tolerance: ±2% and ±5% Zero Ohm - RK73Z • 01005 chip size • Maximum Resistance of 50mΩ • Maximum Continuous Current @70°C: 0.5A ~ 2.0A Ultra Precision - RN73 • Tolerance: ±0.05% ~ ±1% • Nickel chromium resistor element • Resistance Range: 10Ω ~ 1MΩ • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/°C Ultra Precision - RN73H • Rated Ambient Temperature +85°C • NEW 0402 chip size: Resistance Range: up to 300KΩ • NEW 0603: Resistance Range: up to NEW 1MΩ • Oper. Temp. Range -55°C to +155°C • Improved moisture resistance • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.05% ~ ±1% • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/°C Resistor Array Solder Plating Ni Plating Protective Coating Solder Plating Resistive Inner Film Electrode Ceramic Substrate Ni Plating st Protective Coating Quality 1 Ceramic Substrate • Sizes available: 01005, 0201, 0402, 0603, 0805, 1206, 1210, 2010, 2512 It’s a Way of Life You expect product quality from any component that makes it into one of your designs. But in today’s competitive global marketplace, there’s so much more to the quality equation. At KOA Speer, we’ve launched our Quality 1st initiative to reinforce our organization wide focus on serving you at the highest possible level. And our commitment to quality in everything we do is paying off… in the pastSPEER two yearsELECTRONICS, we’ve received ten major KOA INC.customer quality awards. Bolivar Drive, P.O. Box 547 Bradford, PA 16701 USA Bolivar Drive, P.O. Box 547 Phone: 814-362-5536 Bradford, PA 16701 Fax: 814-362-8883 Phone: 814-362-5536 KOAwww.koaspeer.com SPEER ELECTRONICS, INC. Fax: 814-362-8883 CERTIFIED www.koaspeer.com AHA 2/13 2.5M ©2013 KOA Speer Electronics, Inc. Resistive Inner Film Electrode CERTIFIED Printed in U.S.A. • Sizes available: 0402, 0603, 0805, 1206, 1210 Melf Carbon Film/Metal Film/ Zero Ohm • RD41 Carbon Film Series • RN41 & RM41 Metal Film Series • CC Zero Ohm Series Linear Positive Tempco - MLT • Series with 6 specifiable temperature coefficients • Resistance Range: 10Ω ~ 43kΩ • Tolerance: ±2% and ±5% • T.C.R.: +2000 ~ 3900 ppm/°C Fixed Ceramic - CPCN • Series is reliable in pulse transient applications • Power Rating: 0.5W, 1W, 1.5W and 2W • Resistance Range: 1kΩ ~ 15kΩ • Tolerance: ±20% Concave, Square Corner Isolated Network - CN • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% ~ ±5% • Sizes available: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x4 elements Bussed Network - CNB • Resistance Range: 1kΩ ~ 470kΩ • Tolerance: ±5% • Sizes available: 4 or 8 elements included in one array Bussed Network - CND • Reverse common electrode and side electrode type circuits available • Resistance Range: 22Ω ~ 100kΩ • Tolerance: ±5% • Sizes available: 0603, 0805 and 1206 x8 elements Zero Ohm Jumper - CNZ • Current Rating @70°C (per element): 0.5A and 1.0A • Sizes available: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x4, x8 elements Convex, Scalloped Corner Isolated Network - CN_A • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603, 1206 x4 elements Convex, Square Corner Isolated Network - CN_N • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±5% • Sizes available: 0201 x2, x4 elements Isolated Network - CN_K • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603 x2, x4, x8 elements, 0402, 1206 x2, x4 elements Protective Coating Electrode Resistive Film Inner Electrode Ceramic Substrate Specialty Surge Current - SG73 • 10x pulse power capability • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±10%, ±20% • Sizes available: 0603, 0805, 1206, 1210, 2010, 2512 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate NEW Pulse SG73P and Highly ESD Proof SG73S • Superior surge withstanding voltage and pulse withstanding voltage • Resistance Range: 1Ω ~ 10MΩ • Tolerance: ±0.5% ~ ±5% • Sizes available: 0402, 0603, 0805, 1206, 1210, 2010, 2512 Voltage SG73S SG73P 0 100ms~1us 1us~1ms Time High Voltage - HV73 • 2x rated working voltage of standard thick film • Maximum Working Voltage: 350V, 400V, 500V, 2kV(d.c.) and 3kV(d.c.) • Resistance Range: 10kΩ ~ 51MΩ • Tolerance: ±0.5% ~ ±5% • Sizes available: 0603, 0805, 1206, 2010, 2512 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Wide Terminal - WK73 • Enhanced thermal performance • Power Rating: .75W, 1W & 1.5W • Resistance Range: 10mΩ ~ 1MΩ • Tolerance: ±1% and ±5% • T.C.R.: ±100, ±200, ±300 and ±800 ppm/°C • Size available: 0612, 1020, 1218, 1225 Anti-Sulfur • Excellent anti-sulfuration characteristics • High heat and weather resistance • Series available: RK73B, RK73H, CN, RK73Z, SG73 Leaded Resistors Surface Mount Resistors The industry’s broadest line of leaded resistors and networks includes designs with various material composition and structure for use in general purpose, precision, anti-surge, high voltage, high resistance applications. Flat chip resistors and arrays include general purpose, high precision, laser trimmable, audio and surge, high voltage, high heat and zero ohm types for applications ranging from general purpose to ultra precision. Carbon Film General Purpose - Reduced Size and Flame Proof CF/CFS/CFP Series • Power Rating: 0.25W ~ 0.5W • Resistance Range: 2.2Ω ~ 5.1MΩ • Tolerance: ±2% and ±5% Special Power Film High Power Resistor - SPR and SPRX Series • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 110KΩ • Tolerance: ±1% ~ ±5% Metal Film General Purpose - Reduced Size MF/MFS/RK Series • Power Rating: 0.25W ~ 1W • Resistance Range: 1Ω ~ 100MΩ • Tolerance: ±0.5% ~ ±5% Precision - RNS Series • Power Rating: 0.125W ~ 1W • Resistance Range: 0.2Ω ~ 6.8MΩ • Tolerance: ±0.1% ~ ±1% Radial-Precision - LF/LFF/RK26 Series • Power Rating: 0.125W ~ 0.5W • Resistance Range: 1Ω ~ 33MΩ • Tolerance: ±0.5% ~ ±5% Precision Metal Film - MRP Series • Pair Resistor • Resistance Range: 50Ω ~100kΩ • Tolerance: ±0.1% ~ ±1% • Tolerance Ratio: 0.025% ~ 0.5% Molded Precision - SF Series • Power Rating: 0.125W ~ 0.5W • Resistance Range: 100Ω ~ 5.11MΩ • Tolerance: ±0.01% ~ ±0.5% Wirewound Power and Small Type - CW/CWP Series • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 430Ω • Tolerance: ±0.25% ~ ±10% • CW1SSCT52A100J: UL1412 approved Precision Power Type - CW-H Series • CWH meets MIL-PRF-26 (U characteristics) • Power Rating: 1W, 2W, 3W • Resistance Range: 0.47Ω ~ 3kΩ Precision Power - RW Series • Power Rating: 0.5W ~ 10W • Resistance Range: 0.1Ω ~ 62kΩ • Tolerance: ±0.5% ~ ±5% Power Rectangular Type - BGR, BWR Series • BGR with glass core • BWR with ceramic core • Power Rating: 1W ~ 40W • Resistance Range: 0.1Ω ~ 390Ω • Tolerance: ±1% ~ ±10% Leaded SIP Networks Ultra Precision - MRS • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.01% ~ ±0.5% • T.C.R. up to ±2.5ppm/°C Thick Film - RKC/RKH/RKL Series • Number of Pins: 3 ~ 16 • Resistance Range: 22Ω ~ 2.2MΩ • Tolerance: ±1% ~ ±5% • Customs available: ±0.5% Resistive Film Protective Coating Metal Oxide General Purpose - MO/MOX Series • Power Rating: 0.5W ~ 3W • Resistance Range: 0.2Ω ~ 150kΩ • Tolerance: ±2% and ±5% Reduced Size - MOS/MOSX Series • Power Rating: 0.5W ~ 5W • Resistance Range: 0.1Ω ~ 100kΩ • Tolerance: ±1% ~ ±5% Power Rectangular Type - BSR Series • Power Rating: 2W ~ 20W • Resistance Range: 430Ω ~ 75kΩ • Tolerance: ±5% Trimming Line Marking Glass Coating Lead Frame Ceramic Substrate Inner Electrode Zero Ohm/Jumper Conformal Coated - Z Series • Max. Amperage: 1.5A, 2.5A • Resistance: less than 20mΩ Molded - J Series • Max. Amperage: 8A, 10A • Resistance: 10mΩ Max. Jumper Wire - JL Series • Max. Current Rating: 8A, 10A End Cap Lead Wire Molded Resin Solder Plated Copper Wire Get On-Board with KOA Speer Your Ideal Partner for Passive Component Solutions Inner Insulation Resistive Coating Outer Film Coating Resin As you search for surface mount passive components that will ensure the optimum performance of your circuit design, count on the broad line of products from KOA Speer. Our engineering teams are developing a wide range of new smaller sizes and integrated packages to accommodate higher clock speeds and product downsizing. Our world class manufacturing facilities are poised to ramp up with new designs, allowing us to take them to market with the shortest of lead times. And our sophisticated warehousing and distribution system ensures the availability of components when you need them. Inner Electrode Ceramic Substrate Terminal Ceramic Fixed Power - PCF Series • Power Rating: 0.5W ~ 2W • Resistance Range: 3.3Ω ~ 390kΩ • Tolerance: ±10% and ±20% Ceramic Fixed Power - HPC Series • Power Rating: 0.5W ~ 5W • Resistance Range: 3.3Ω ~ 390kΩ • Tolerance: ±10% and ±20% Linear Positive Miniature Tempco Thermistor - LT Series • Resistance Range:100Ω ~ 39kΩ • Tolerance: ±5% • T.C.R.: +1000 ~ +4500 ppm/°C • T.C.R Tolerance: ±10%, ±15% Precision Linear - LP Series • Resistance Range: 1Ω ~ 100kΩ • T.C.R. Tolerance: ±5% ~ ±10% • Tolerance: ±1%, ±2% and ±5% • T.C.R.: +150 ~ +5000 ppm/°C Current Sensing Rectangular Type BPR Series • Power Rating: 2W ~ 10W • Resistance Range: 0.01Ω ~ 1Ω • Tolerance: ±5% and ±10% Ceramic Case Cement Resistive Element Type J Ceramic Core Resistive Film Insulation Coating Specialty Fixed Anti-Surge - RCR Series • RCR50EN meets EN60065 requirements • Overload Voltage up to 5,000V • Power Rating: 0.25W ~ 3W • Resistance Range: 3.3Ω ~ 100MΩ • Tolerance: ±1% and ±5% High Voltage - GS Series • Max. Working Voltage: 0.5kV ~ 40kV • Power Rating: 0.25W ~ 12W • Resistance Range: 0.5MΩ ~ 10GΩ • Tolerance: ±0.5% ~ ±10% SIP High Voltage - RK92 Series • Max. Working Voltage: 1kV ~ 10kV • Power Rating: 0.5W ~ 1.1W • Resistance Range: 1MΩ ~ 1GΩ • Tolerance: ±1% ~ ±20% Thick Film Thin Film General Purpose - RK73B • NEW 01005 chip size: Resistance Range: NEW 4.7Ω ~ 1MΩ • Tolerance: ±2% and ±5% • Resistance Range: 1Ω ~ 22MΩ Precision - RK73H • NEW 01005 chip size, +1% • Tolerance: ±0.5% and ±1% • Resistance Range: 1Ω ~ 10MΩ High Precision - RK73G • T.C.R.: ±50 ppm/°C • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.5% and ±1% Audio Chip - RK73A • Low current noise • Clarity in signal processing • Resistance Range: 2.2Ω ~ 1MΩ • Tolerance: ±2% and ±5% Zero Ohm - RK73Z • 01005 chip size • Maximum Resistance of 50mΩ • Maximum Continuous Current @70°C: 0.5A ~ 2.0A Ultra Precision - RN73 • Tolerance: ±0.05% ~ ±1% • Nickel chromium resistor element • Resistance Range: 10Ω ~ 1MΩ • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/°C Ultra Precision - RN73H • Rated Ambient Temperature +85°C • NEW 0402 chip size: Resistance Range: up to 300KΩ • NEW 0603: Resistance Range: up to NEW 1MΩ • Oper. Temp. Range -55°C to +155°C • Improved moisture resistance • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.05% ~ ±1% • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/°C Resistor Array Solder Plating Ni Plating Protective Coating Solder Plating Resistive Inner Film Electrode Ceramic Substrate Ni Plating st Protective Coating Quality 1 Ceramic Substrate • Sizes available: 01005, 0201, 0402, 0603, 0805, 1206, 1210, 2010, 2512 It’s a Way of Life You expect product quality from any component that makes it into one of your designs. But in today’s competitive global marketplace, there’s so much more to the quality equation. At KOA Speer, we’ve launched our Quality 1st initiative to reinforce our organization wide focus on serving you at the highest possible level. And our commitment to quality in everything we do is paying off… in the pastSPEER two yearsELECTRONICS, we’ve received ten major KOA INC.customer quality awards. Bolivar Drive, P.O. Box 547 Bradford, PA 16701 USA Bolivar Drive, P.O. Box 547 Phone: 814-362-5536 Bradford, PA 16701 Fax: 814-362-8883 Phone: 814-362-5536 KOAwww.koaspeer.com SPEER ELECTRONICS, INC. Fax: 814-362-8883 CERTIFIED www.koaspeer.com AHA 2/13 2.5M ©2013 KOA Speer Electronics, Inc. Resistive Inner Film Electrode CERTIFIED Printed in U.S.A. • Sizes available: 0402, 0603, 0805, 1206, 1210 Melf Carbon Film/Metal Film/ Zero Ohm • RD41 Carbon Film Series • RN41 & RM41 Metal Film Series • CC Zero Ohm Series Linear Positive Tempco - MLT • Series with 6 specifiable temperature coefficients • Resistance Range: 10Ω ~ 43kΩ • Tolerance: ±2% and ±5% • T.C.R.: +2000 ~ 3900 ppm/°C Fixed Ceramic - CPCN • Series is reliable in pulse transient applications • Power Rating: 0.5W, 1W, 1.5W and 2W • Resistance Range: 1kΩ ~ 15kΩ • Tolerance: ±20% Concave, Square Corner Isolated Network - CN • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% ~ ±5% • Sizes available: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x4 elements Bussed Network - CNB • Resistance Range: 1kΩ ~ 470kΩ • Tolerance: ±5% • Sizes available: 4 or 8 elements included in one array Bussed Network - CND • Reverse common electrode and side electrode type circuits available • Resistance Range: 22Ω ~ 100kΩ • Tolerance: ±5% • Sizes available: 0603, 0805 and 1206 x8 elements Zero Ohm Jumper - CNZ • Current Rating @70°C (per element): 0.5A and 1.0A • Sizes available: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x4, x8 elements Convex, Scalloped Corner Isolated Network - CN_A • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603, 1206 x4 elements Convex, Square Corner Isolated Network - CN_N • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±5% • Sizes available: 0201 x2, x4 elements Isolated Network - CN_K • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603 x2, x4, x8 elements, 0402, 1206 x2, x4 elements Protective Coating Electrode Resistive Film Inner Electrode Ceramic Substrate Specialty Surge Current - SG73 • 10x pulse power capability • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±10%, ±20% • Sizes available: 0603, 0805, 1206, 1210, 2010, 2512 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate NEW Pulse SG73P and Highly ESD Proof SG73S • Superior surge withstanding voltage and pulse withstanding voltage • Resistance Range: 1Ω ~ 10MΩ • Tolerance: ±0.5% ~ ±5% • Sizes available: 0402, 0603, 0805, 1206, 1210, 2010, 2512 Voltage SG73S SG73P 0 100ms~1us 1us~1ms Time High Voltage - HV73 • 2x rated working voltage of standard thick film • Maximum Working Voltage: 350V, 400V, 500V, 2kV(d.c.) and 3kV(d.c.) • Resistance Range: 10kΩ ~ 51MΩ • Tolerance: ±0.5% ~ ±5% • Sizes available: 0603, 0805, 1206, 2010, 2512 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Wide Terminal - WK73 • Enhanced thermal performance • Power Rating: .75W, 1W & 1.5W • Resistance Range: 10mΩ ~ 1MΩ • Tolerance: ±1% and ±5% • T.C.R.: ±100, ±200, ±300 and ±800 ppm/°C • Size available: 0612, 1020, 1218, 1225 Anti-Sulfur • Excellent anti-sulfuration characteristics • High heat and weather resistance • Series available: RK73B, RK73H, CN, RK73Z, SG73 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Ultra-low Ohm - UR73 Series • Resistance Range: 10mΩ ~ 100mΩ • Tolerance: ±1% • Low T.C.R.: 100 ~ 500 ppm/°C • Sizes available: 0402 ~ 2512 Wide terminal - WK73S Series • Robust Thermal Cycle characteristic • Power Rating: .75W ~ 1.5W • Resistance Range: 10mΩ ~ 9.1Ω • Tolerance: ±1% & ±5% • T.C.R.: ±100, ±200, ±300 and ±800 ppm/°C • Sizes available: 0612, 1020, 1218 & 1225 Circuit Protection & Thermal Sensor Inductors Integrated Components Four basic types of current sensing resistors are available in low-ohm, high precision, 4-terminal Kelvin, high power, low profile, high frequency, high heat, and power shunt chips for a wide range of detecting applications and power applications. Complementing our flat chip resistors is a complete line of circuit protection products including thermistors, platinum sensors, chip and ceramic case fuses and metal oxide varistors. Magnetic solutions cover an application range from RF to power by using ferrite, ceramic, thin film, wirewound, choke coil and transponder coil technology. Improve performance, save space and lower costs by combining components using our thin film, silicon based, multi-element technology. Molded Metal Plate Power Shunt Compliant Lead - Frame SL/TSL/SLN/SLZ Series • Non-wirewound, excellent for high frequency • Enhanced thermal shock capability • Operating Temperature: up to +180°C • Power Rating: 0.75W, 1W, 2W and 3W • SLZ - Zero Ohm, 1W • Resistance Range: 3mΩ ~ 22MΩ • Tolerance: ±0.5% ~ ±5% • T.C.R.: 75 ~ 200 ppm/°C TLR Series • Resistance Range: 1mΩ ~ 20mΩ • Tolerance: ±1%, ±2% & ±5% • Sizes available: NEW 0402, 1206, 2010, 2512 • NEW 0805: 1W, Tolerance: ±1%, Resistance Range: 5mΩ ~ 10mΩ • T.C.R.: ±75 and ±100 ppm/°C • Ultra Low Height: 0.6mm • Power Rating: 0.2W, 0.5W, 1W & 2W High power - PSB Series • Power Rating: 6W • Resistance Range: 0.75mΩ & 1mΩ • Tolerance: ±1% • T.C.R.: ±75 ppm/°C Solder Metal plate terminal - NPR Series • Power Rating: 1W & 2W • Resistance Range: 3.9mΩ ~ 22MΩ • Tolerance: ±1%, ±5% & ±10% Four-terminal - CSR Series • Suitable for Kelvin applications • Power Rating: 1W & 2W • Resistance Range: 5mΩ ~ 50mΩ • Tolerance: ±0.5% & ±1% • Low T.C.R.: 50 ppm/°C Molded Resin Inner Resistive Electrode Film Protective Coating Ceramic Substrate Protective Coating Molded Resistive Resin Element Voltage Electrode Resistive Element Current Electrode TLRH Series • Carrier metal plate inside, resistor of high radiation of heat structure • Resistance Range: 10mΩ ~ 250mΩ • Tolerance: ±1% • T.C.R.: ±50 ppm/°C, ±75 ppm/°C • Sizes available: 0805, 2512 2010 (UNDER DEVELOPMENT) LR72 Series • Power Rating: 1/4W, 1/2W & 1W • Resistance Range: 2mΩ ~ 8mΩ • Tolerance: ±5% • Custom configurations available LR72A Sn Plating Electrode High power - PSI Series • Power Rating: 3W • Resistance Range: 1mΩ ~ 4mΩ • Tolerance: ±1% • T.C.R.: ±50 and ±75 ppm/°C High power - PSE Series • Power Rating: 3W • Resistance Range: NEW 2mΩ, 0.5mΩ, 1mΩ,1.5mΩ • Tolerance: ±5% • T.C.R.: ±150 ppm/°C LR72B Copper Nickel Alloy LR72C Copper Nickel Alloy Termination Custom Milliohm - LR Series • Resistance Range: 3mΩ ~ 100mΩ • All custom made parts • Max. Current Rating: 3A ~ 21A • Tolerance: ±3% and ±5% Ni Plating Protective Coating Fuses Fusing Flat Chip Resistors - RF73 • Resistance Range: 0.2Ω ~ 510Ω • Tolerance: ±5% • Sizes available: 0603 ~ 2512 • UL1412 approved: (0805 ~ 2512 sizes) Secondary Circuit Chip Fuses - TF • Rated Current: from .2A ~ 5A • Rated Voltage: 24V & 32V • Sizes available: 0402, 0603 • TF16VN for Automotive (UNDER DEVELOPMENT) • Anti-pulse type available (0603) • UL248.14, c-UL(CSA)C22.2 approved Platinum Inner Thin Film Electrode Ceramic Substrate Sn Plating Axial Type - SDT101A/SDT101B • -55°C ~ +300°C Operating temperature +0.05% resistance change for 300 cycles • Resistance Range: 10Ω, 100Ω, 500Ω • Tolerance: ±0.5% and ±1% • T.C.R.: +3500 ppm/°C Platinum Ceramic Thin Film Core Ni Plating Protective Coating Inner Fuse Element Electrode Ceramic Substrate CCP • Rated Current: from 0.4A ~ 5.0A • Rated Voltage: 24V & 76V • Sizes available: 1206 & 1210 • UL248.14, c-UL(CSA)C22.2 approved Electrode Solder Marking (A only) Resistive Element BLR Series • Flame retardant ceramic case • Resistance Range: 8mΩ ~ 50mΩ • Tolerance: ±5% and ±10% • Power Rating: 1W, 2W & 15W • T.C.R.: ±100 ppm/°C BPR Series • Leaded flame retardant ceramic case • Resistance Range: 10mΩ ~ 1Ω • Tolerance: ±5% and ±10% • Power Rating: 2W ~ 10W • T.C.R.: ±350 ppm/°C Resistor Element Cement Ceramic Case Trimming Line Molded Resin Radial Type - SDT310 • T.C.R. in accordance with DIN EN/IEC 60751 • Resistance Range: 100Ω, 500Ω, 1KΩ • Tolerance of Measuring Temp: Down to ±(0.15 + 0.002 |t|)°C |t|: Absolute value of a degree centigrade • Temperature Range: -55°C ~ +650°C Lead Weld Reinforcing Coating Protective Coating Platinum Thin Film Ceramic Substrate Electrode Electrode Lead Cap Wire Insulation Coating Ceramic Copper Nickel Alloy Solder Plating Ni Plating Chip Type Sensor - SDT73H /SDT73V • T.C.R. in accordance with DINEN/IEC 60751 • V Series - AECQ200 standard • Resistance Range: 100Ω & 500Ω • Tolerance: ±0.2% and ±1% • T.C.R.: +3850 ppm/°C Solder Resistive Element Resistive Element Termination Electrode Protective Coating Platinum Thermal Sensors Lead Wire Welding Point Custom Configurations - ST Series/AFS Units • Customer configurations based on use of SDT101 and SDT310 products Applications for Temperature Compensation • Automotives • Sensor Drive Controls • Telecommunications • Measuring Equipments Buffer Fuse Element Primary Circuit Chip Fuse - CCF • Up to 125V AC and 60V DC • UL248.14, c-UL(CSA)C22.2 approved • NEW CCF1F series IEC606127 Fast acting fuse • Rated Current: 0.4A ~ 15A • Sizes available: 2410 Thermal Fuse, Power Type - WF • Rated Current: 2A & 10A • Rated Voltage: 250V • Resistance Range: 1Ω ~ 10kΩ • UL1412 approved (4.7Ω ~ 100Ω) Varistors Thermal Sensors Wirewound Choke Coils Choke Coils Thin Film NEW Load Dump Style - NV73DS • Meets JASO load dump surge test • Varistors Voltage: 27 & 47 • Maximum Energy: 10J Metal Oxide Varistors Chip Type NV73 • Protects against static electricity, switching and incoming surges • Varistor Voltage: 8V ~ 150V • Sizes available: 0201 ~ 2220 • 3pF available • Maximum Energy: 0.005J ~ 12.0J Automotive Style - NV73DL • Low leakage current • Operating Temperature: up to +125°C • Maximum Energy: 0.1J ~ 1.5J • Varistors Voltage: 12 ~ 82V1mA • Sizes available: 0603, 0805 & 1206 Thin Film Flat Chip Linear - PTC LT73/LP73 • LT73 available in 25 T.C.R. & wide resistance • NEW LT73V for automotive • LP73 available high resistance can be made even with high T.C.R. (1206: 10k ohm T.C.R. ±5000) & tight tolerance • Resistance Range: 51Ω ~ 51KΩ • Tolerance: ±1% ~ ±5% • T.C.R.: +150 ~ +5000 ppm/°C • Sizes available: 0603, 0805 & 1206 1210 Molded - KL32 • Flat-top design • High Q with wirewound structure • Inductance Range: 0.005µH to 330µH • Tolerance: ±5% ~ ±20% NEW Custom Wirewound Coil - LWA • Nominal Inductance: 550µH • Tolerance: ±5% • Sizes available: 1006 NEW Choke Coil Inductor - LCM1060 • Delivers low DC, high allowable current and low leakage magnetic flux • DC Resistance Max.: 10.64MΩ ~ 892MΩ • Nominal Inductance: 1.5µH ~ 470µH • Tolerance: ±20%, ±30% Thin Film Inductor - KL73 • DC Resistance Max: 0.1Ω ~ 5Ω • Inductance Range: .56nH ~ 100nH • Tolerance: ±0.1nH, ±0.2nH or ±2%, ±5% • Sizes available: 0402 ~ 1206 Sn Plating Ni Plating Varistor Element Inner Side Electrode Metal Oxide Varistors Disc Type - NVD • Higher surge current • Absorbs positive and negative surges • Varistor Voltage: 18V ~ 1800V • Disc diameters of 05, 07, 10, 14 & 20 • Maximum Energy: 0.3J ~ 360J • UL1449 3rd Edition approved • UL1414, c-UL1414 approved 1 2 Lead Wire NEW Temperature Protection Resistor - TPR • Quickly fuses to the overhead • Terminal Temperature Under Rated Load: +125°C or less • Power Rating: 1W • Resistance Range: 2Ω ~ 10KΩ Automotive Style - LT73V • AEC-Q200 data is available • Temperature Range: -55°C ~ ±155°C • Resistance Range: 51Ω ~ 22KΩ • T.C.R.: +150 ~ +4500 • Sizes available: 0805 & 1206 Thick Film Flat Chip Linear - PTC/LA73 • Available in 13 specifiable temperature characteristics • Resistance Range: 22Ω ~ 10KΩ • Tolerance: ±5% • Sizes available: 0603, 0805 & 1206 Chip Positive Thermistor - PT72 • 3 Curie Temperatures: 70°C, 80°C & 100°C • Resistance Range: 50Ω, 120Ω, 470Ω & 1KΩ • Sizes available: 0603 & 0805 Temperature Characteristics 3 4 Ceramic Case Cement Thermal Fuse Resistor Inner Electrode Positive Temperature Characteristics 1. Insulation coating 2. Electrodes 3. Varistor element 4. Lead wire Flat Chip Negative Temperature - NT73 • 19 standard resistance values • Resistance Tolerance: ±5% ~ ±15% • B Constant Tolerance: ±3% ~ ±10% • Sizes available: 0603 ~ 1206 Negative Temperature Characteristics W H Magnetic Wire Electrode Magnet Ferrite Wire Core Molded Electrode Resin High Q - KQ/KQT • Ideal for low loss, high output power consumption • Q Factor Min.: 15 ~ 65 • Inductance Range: 1.0nH ~ 10µH • Tolerance: ±0.1nH, ±0.2nH or ±2% ~ ±20% • Sizes available: 0402, 0603, 0805 & 1008 Magnetic Inner Coating Wire Power - LPC • DC Current Max.: 0.14A ~ 10A • Inductance Range: 0.68µH ~ 6.8mH `• Sizes: 4045, 9040, 1065, 12065 • Tolerance: ±10% ~ ±30% Common Mode Choke Coil - SLF • DC Current Max.: 0.6A ~ 1.6A • Inductance Range: 10µH ~ 2mH • Tolerance: ±30% and ±50% • Size available: 9.2x6.0x5.0mm 1 Power - SDR • DC Current: 2A ~ 0.2A • Inductance Range: 1.5µH ~ 1200µH • Sizes: 0603, 0640, 0805, 1006, 0906 • Tolerance: ±10%, ±15%, ±20% 2 Coil Pattern Ceramic Substrate • Polarity Ceramic Inductor - MHL • Q Min.: 8 ~ 12 • Inductance Range: 1.0nH ~ 220nH • Tolerance: 0.3nH & ±5% • Sizes available: 0402, 0603 Electrode ACB - 20 Pins Insulation Direction Mark Film NEW LF Antenna KT Transponder coil for recieving • High sensitivity and high Q • Strong fixing strength by 4 electrode terminals • Inductance Range: NEW 2.4mH, 7.2mH, 12mH • Sensitivity: ~ 75mV/µT • Sizes available: 11.8x3.6x3.0mm TFA - 20 Pins RNX - Customized (8 ~ 24 Pins) Different resistance combinations available Electrodes Thin Film Electrode Magnetic flux of KT Electrode Land pattern Standard - CZB • DC Current Max.: 800mA ~ 100mA • Impedance Range @100MHz: 10Ω ~ 2000Ω • Tolerance: ±25% • Sizes available: 0402 ~ 1206 High Power - CZP • DC Current Max.: 1A ~ 4A • Impedance Range @100MHZ: 19Ω ~ 1000Ω • Tolerance: ±25% • Sizes available: 0603 ~ 1206 Electrodes Terminations (Metallization Bands) Low Temperature Co-Fired Ceramic LTCC-KLC • • • • • • • • • Stack accuracy <20µm Line width as low as 60µm Line-to-line spacing as low as 60µm Cavity flatness <25µm Cavity width: 600µm min. Cavity depth: 100µm min. Cavity wall thickness: 500µm min. Flexural/bonding strength: 250MPa Thermal coefficient expansion (TCE): 5.5x10-6/K • Thermal conductivity: 3W/m-K • Minimum insulation resistance: 1x1013Ω - cm • Density: 2.8g/cm3 • Max. surface roughness (Ra): 0.4µm • Min. withstanding voltage: 15000V/µm • Fired layer thickness: 80µm, 100µm, 125µm • Via diameter: 100µm, 150µm, 200µm Applications: • MEMS packages • High frequency-microwave, milliwave • Harsh environment - high temperature, high humidity • Mobile communications • Multi chip modules Diode Networks Silver Metallization Ferrite Beads Shielded Power Chip Inductor - LKS • Inductance Range: 3.3µH ~ 1000µH • Extremely little leakage magnetic flux • DC Current Max.: 0.4A ~ 6.6A • DC Resistance Max.: 11mΩ ~ 2576mΩ • Tolerance: ±20% ~ ±30% • Sizes available: 7.5x7.5 ~ 12.5x12.5mm Height: 4.5 ~ 6mm RBA - Bussed (8 ~ 24 Pins) Solder Plating Ni Plating Terminations (Metallization Bands) Shielded - SDS • DC Current Max.: 0.07A ~ 7.5A • Inductance Range: 2.2µH ~ 15mH • Tolerance: ±10% ~ ±20% C • Sizes available: 8x10.5 ~ 12.7x12.7mm Height: 2.7 ~ 8mm Thin Film - AC(X) & CR(X) • AC terminator • High frequency capacitor technology • Improves signal quality • Lowers power dissipation Filter Network - TFA & TFB • ESD protection • Low pass filter • Robust thin film technology Transponder Coils 3 L2 SDR Ceramic Magnet Substrate Wire RIA - Isolated (8 ~ 24 Pins) Inner Electrode Molded Resin High Current - KQC • Low DC resistance, high allowable DC current • Inductance Range: 0.8nH ~ 27nH • Tolerance: ±0.1nH, ±0.2nH or ±2%, ±5% • Sizes available: 0402, 0403 & 0603 Isolated - RIA, RNI, Bussed RBA, Custom type RNX, HD(X) • Precision value matching • Tight Tolerance: ±0.1% ~ ±5% • T.C.R. matching Resistor/Capacitor Networks 4 • • Multilayer Electrode Marking Protective Coating Resistor Networks L1 LPC 101 Thick Film Low-ohm - SR73 Series • Resistance Range: 24mΩ ~ 10Ω • Tolerance: ±0.5% ~ ±5% • 0201, 0402 ~ 2512 chip sizes • T.C.R.: ±100 ~ ±1000 ppm/°C Current Sense Resistors NEW Transponder Coil - KTZ1030 • Impact resistance due to 4 electrode terminal and unique coil structure • Nominal Inductance: 7.6µH • Sensitivity: 33mV/µT • Sizes available: 10.1x10.0x3.2mm Ferrite Core Magnetic Wire Solder Plating Ni Plating Resinic Base Silver Metallization Electrode Networks - RTX • Available in SCSI & PECL terminations • High level of integration RTY - Divider (SOT-23) ESD Suppressors - ED(X) & PGD • ESD protection • IEC-61110-4-2 compliant • Bidirectional • ED(X): Multi-channel array format Diode Terminator - DNA & DN(X) • ESD protection • IEC-61000-4-2 compliant • Low capacitance Cross-Sectional Structure IC Chip Cavity Buried Via conductor pattern Inductor Thermal Via Inner layer DN5 Precision Voltage - RTY & CNN • Ratio matching • Tolerance: ±0.05% & ±0.1% • T.C.R. matching Thick Film - MRGF16 Resistor • Standard circuits • Low profile: 2.2mm or lower BGA (ball grid array) - BR • High level of integration • Low inductance 1 Cavity SMD Capacitor Hybrid IC KA - Hybrid IC Series • High density mounting by bonding (COB) • Adjusted processes are decreased by function and ratio trimmings • Substrate materials: Al2O3 alumina and glass epoxy • Printing: Conductor Resistance: Ag-Pd: 18mW/ /15µm Heat Shock: -55°C ~ +125°C, 300 cycles RuO2: 5W ~ 10MW, +100x10-6/K • Mounting: Conductor Resistance: Ag-Pt: 5mW/ /10µM Heat Shock: -55°C ~ +125°C, 500 cycles RuO2: 5W ~ 10MW, +100x10-6/K • Various types of packaging available Applications: • Automotive applications - ECU, power windows • Power supply - DC/DC converters, AC/DC converters, stabilizer • Industrial devices - control circuits • Telecommunication equipment telephone switchboard, LAN, tranceivers, VCO, VTXO Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Ultra-low Ohm - UR73 Series • Resistance Range: 10mΩ ~ 100mΩ • Tolerance: ±1% • Low T.C.R.: 100 ~ 500 ppm/°C • Sizes available: 0402 ~ 2512 Wide terminal - WK73S Series • Robust Thermal Cycle characteristic • Power Rating: .75W ~ 1.5W • Resistance Range: 10mΩ ~ 9.1Ω • Tolerance: ±1% & ±5% • T.C.R.: ±100, ±200, ±300 and ±800 ppm/°C • Sizes available: 0612, 1020, 1218 & 1225 Circuit Protection & Thermal Sensor Inductors Integrated Components Four basic types of current sensing resistors are available in low-ohm, high precision, 4-terminal Kelvin, high power, low profile, high frequency, high heat, and power shunt chips for a wide range of detecting applications and power applications. Complementing our flat chip resistors is a complete line of circuit protection products including thermistors, platinum sensors, chip and ceramic case fuses and metal oxide varistors. Magnetic solutions cover an application range from RF to power by using ferrite, ceramic, thin film, wirewound, choke coil and transponder coil technology. Improve performance, save space and lower costs by combining components using our thin film, silicon based, multi-element technology. Molded Metal Plate Power Shunt Compliant Lead - Frame SL/TSL/SLN/SLZ Series • Non-wirewound, excellent for high frequency • Enhanced thermal shock capability • Operating Temperature: up to +180°C • Power Rating: 0.75W, 1W, 2W and 3W • SLZ - Zero Ohm, 1W • Resistance Range: 3mΩ ~ 22MΩ • Tolerance: ±0.5% ~ ±5% • T.C.R.: 75 ~ 200 ppm/°C TLR Series • Resistance Range: 1mΩ ~ 20mΩ • Tolerance: ±1%, ±2% & ±5% • Sizes available: NEW 0402, 1206, 2010, 2512 • NEW 0805: 1W, Tolerance: ±1%, Resistance Range: 5mΩ ~ 10mΩ • T.C.R.: ±75 and ±100 ppm/°C • Ultra Low Height: 0.6mm • Power Rating: 0.2W, 0.5W, 1W & 2W High power - PSB Series • Power Rating: 6W • Resistance Range: 0.75mΩ & 1mΩ • Tolerance: ±1% • T.C.R.: ±75 ppm/°C Solder Metal plate terminal - NPR Series • Power Rating: 1W & 2W • Resistance Range: 3.9mΩ ~ 22MΩ • Tolerance: ±1%, ±5% & ±10% Four-terminal - CSR Series • Suitable for Kelvin applications • Power Rating: 1W & 2W • Resistance Range: 5mΩ ~ 50mΩ • Tolerance: ±0.5% & ±1% • Low T.C.R.: 50 ppm/°C Voltage Electrode Molded Resistive Resin Element Inner Resistive Electrode Film Protective Coating Ceramic Substrate Protective Coating Molded Resistive Resin Element Current Electrode TLRH Series • Carrier metal plate inside, resistor of high radiation of heat structure • Resistance Range: 10mΩ ~ 250mΩ • Tolerance: ±1% • T.C.R.: ±50 ppm/°C, ±75 ppm/°C • Sizes available: 0805, 2512 2010 (UNDER DEVELOPMENT) LR72 Series • Power Rating: 1/4W, 1/2W & 1W • Resistance Range: 2mΩ ~ 8mΩ • Tolerance: ±5% • Custom configurations available LR72A Sn Plating Electrode High power - PSI Series • Power Rating: 3W • Resistance Range: 1mΩ ~ 4mΩ • Tolerance: ±1% • T.C.R.: ±50 and ±75 ppm/°C High power - PSE Series • Power Rating: 3W • Resistance Range: NEW 2mΩ, 0.5mΩ, 1mΩ,1.5mΩ • Tolerance: ±5% • T.C.R.: ±150 ppm/°C LR72B Copper Nickel Alloy LR72C Copper Nickel Alloy Termination Custom Milliohm - LR Series • Resistance Range: 3mΩ ~ 100mΩ • All custom made parts • Max. Current Rating: 3A ~ 21A • Tolerance: ±3% and ±5% Ni Plating Protective Coating Fuses Fusing Flat Chip Resistors - RF73 • Resistance Range: 0.2Ω ~ 510Ω • Tolerance: ±5% • Sizes available: 0603 ~ 2512 • UL1412 approved: (0805 ~ 2512 sizes) Secondary Circuit Chip Fuses - TF • Rated Current: from .2A ~ 5A • Rated Voltage: 24V & 32V • Sizes available: 0402, 0603 • TF16VN for Automotive (UNDER DEVELOPMENT) • Anti-pulse type available (0603) • UL248.14, c-UL(CSA)C22.2 approved Platinum Inner Thin Film Electrode Ceramic Substrate Sn Plating Axial Type - SDT101A/SDT101B • -55°C ~ +300°C Operating temperature +0.05% resistance change for 300 cycles • Resistance Range: 10Ω, 100Ω, 500Ω • Tolerance: ±0.5% and ±1% • T.C.R.: +3500 ppm/°C Platinum Ceramic Thin Film Core Ni Plating Protective Coating Inner Fuse Element Electrode Ceramic Substrate CCP • Rated Current: from 0.4A ~ 5.0A • Rated Voltage: 24V & 76V • Sizes available: 1206 & 1210 • UL248.14, c-UL(CSA)C22.2 approved Electrode Solder Marking (A only) Resistive Element BLR Series • Flame retardant ceramic case • Resistance Range: 8mΩ ~ 50mΩ • Tolerance: ±5% and ±10% • Power Rating: 1W, 2W & 15W • T.C.R.: ±100 ppm/°C BPR Series • Leaded flame retardant ceramic case • Resistance Range: 10mΩ ~ 1Ω • Tolerance: ±5% and ±10% • Power Rating: 2W ~ 10W • T.C.R.: ±350 ppm/°C Resistor Element Cement Ceramic Case Trimming Line Molded Resin Radial Type - SDT310 • T.C.R. in accordance with DIN EN/IEC 60751 • Resistance Range: 100Ω, 500Ω, 1KΩ • Tolerance of Measuring Temp: Down to ±(0.15 + 0.002 |t|)°C |t|: Absolute value of a degree centigrade • Temperature Range: -55°C ~ +650°C Lead Weld Reinforcing Coating Protective Coating Platinum Thin Film Ceramic Substrate Electrode Electrode Lead Cap Wire Insulation Coating Ceramic Copper Nickel Alloy Solder Plating Ni Plating Chip Type Sensor - SDT73H /SDT73V • T.C.R. in accordance with DINEN/IEC 60751 • V Series - AECQ200 standard • Resistance Range: 100Ω & 500Ω • Tolerance: ±0.2% and ±1% • T.C.R.: +3850 ppm/°C Solder Resistive Element Resistive Element Termination Electrode Protective Coating Platinum Thermal Sensors Lead Wire Welding Point Custom Configurations - ST Series/AFS Units • Customer configurations based on use of SDT101 and SDT310 products Applications for Temperature Compensation • Automotives • Sensor Drive Controls • Telecommunications • Measuring Equipments Buffer Fuse Element Primary Circuit Chip Fuse - CCF • Up to 125V AC and 60V DC • UL248.14, c-UL(CSA)C22.2 approved • NEW CCF1F series IEC606127 Fast acting fuse • Rated Current: 0.4A ~ 15A • Sizes available: 2410 Thermal Fuse, Power Type - WF • Rated Current: 2A & 10A • Rated Voltage: 250V • Resistance Range: 1Ω ~ 10kΩ • UL1412 approved (4.7Ω ~ 100Ω) Varistors Thermal Sensors Wirewound Choke Coils Choke Coils Thin Film NEW Load Dump Style - NV73DS • Meets JASO load dump surge test • Varistors Voltage: 27 & 47 • Maximum Energy: 10J Metal Oxide Varistors Chip Type NV73 • Protects against static electricity, switching and incoming surges • Varistor Voltage: 8V ~ 150V • Sizes available: 0201 ~ 2220 • 3pF available • Maximum Energy: 0.005J ~ 12.0J Automotive Style - NV73DL • Low leakage current • Operating Temperature: up to +125°C • Maximum Energy: 0.1J ~ 1.5J • Varistors Voltage: 12 ~ 82V1mA • Sizes available: 0603, 0805 & 1206 Thin Film Flat Chip Linear - PTC LT73/LP73 • LT73 available in 25 T.C.R. & wide resistance • NEW LT73V for automotive • LP73 available high resistance can be made even with high T.C.R. (1206: 10k ohm T.C.R. ±5000) & tight tolerance • Resistance Range: 51Ω ~ 51KΩ • Tolerance: ±1% ~ ±5% • T.C.R.: +150 ~ +5000 ppm/°C • Sizes available: 0603, 0805 & 1206 1210 Molded - KL32 • Flat-top design • High Q with wirewound structure • Inductance Range: 0.005µH to 330µH • Tolerance: ±5% ~ ±20% NEW Custom Wirewound Coil - LWA • Nominal Inductance: 550µH • Tolerance: ±5% • Sizes available: 1006 NEW Choke Coil Inductor - LCM1060 • Delivers low DC, high allowable current and low leakage magnetic flux • DC Resistance Max.: 10.64MΩ ~ 892MΩ • Nominal Inductance: 1.5µH ~ 470µH • Tolerance: ±20%, ±30% Shielded Power Chip Inductor - LKS • Inductance Range: 3.3µH ~ 1000µH • Extremely little leakage magnetic flux • DC Current Max.: 0.4A ~ 6.6A • DC Resistance Max.: 11mΩ ~ 2576mΩ • Tolerance: ±20% ~ ±30% • Sizes available: 7.5x7.5 ~ 12.5x12.5mm Height: 4.5 ~ 6mm Thin Film Inductor - KL73 • DC Resistance Max: 0.1Ω ~ 5Ω • Inductance Range: .56nH ~ 100nH • Tolerance: ±0.1nH, ±0.2nH or ±2%, ±5% • Sizes available: 0402 ~ 1206 Sn Plating Ni Plating Varistor Element Inner Side Electrode Metal Oxide Varistors Disc Type - NVD • Higher surge current • Absorbs positive and negative surges • Varistor Voltage: 18V ~ 1800V • Disc diameters of 05, 07, 10, 14 & 20 • Maximum Energy: 0.3J ~ 360J • UL1449 3rd Edition approved • UL1414, c-UL1414 approved 1 2 Lead Wire NEW Temperature Protection Resistor - TPR • Quickly fuses to the overhead • Terminal Temperature Under Rated Load: +125°C or less • Power Rating: 1W • Resistance Range: 2Ω ~ 10KΩ Automotive Style - LT73V • AEC-Q200 data is available • Temperature Range: -55°C ~ ±155°C • Resistance Range: 51Ω ~ 22KΩ • T.C.R.: +150 ~ +4500 • Sizes available: 0805 & 1206 Thick Film Flat Chip Linear - PTC/LA73 • Available in 13 specifiable temperature characteristics • Resistance Range: 22Ω ~ 10KΩ • Tolerance: ±5% • Sizes available: 0603, 0805 & 1206 Chip Positive Thermistor - PT72 • 3 Curie Temperatures: 70°C, 80°C & 100°C • Resistance Range: 50Ω, 120Ω, 470Ω & 1KΩ • Sizes available: 0603 & 0805 Temperature Characteristics 3 4 Ceramic Case Cement Thermal Fuse Resistor Inner Electrode Positive Temperature Characteristics 1. Insulation coating 2. Electrodes 3. Varistor element 4. Lead wire Flat Chip Negative Temperature - NT73 • 19 standard resistance values • Resistance Tolerance: ±5% ~ ±15% • B Constant Tolerance: ±3% ~ ±10% • Sizes available: 0603 ~ 1206 W H Magnetic Wire Electrode Magnet Ferrite Wire Core Molded Electrode Resin High Q - KQ/KQT • Ideal for low loss, high output power consumption • Q Factor Min.: 15 ~ 65 • Inductance Range: 1.0nH ~ 10µH • Tolerance: ±0.1nH, ±0.2nH or ±2% ~ ±20% • Sizes available: 0402, 0603, 0805 & 1008 Power - LPC • DC Current Max.: 0.14A ~ 10A • Inductance Range: 0.68µH ~ 6.8mH `• Sizes: 4045, 9040, 1065, 12065 • Tolerance: ±10% ~ ±30% LPC Common Mode Choke Coil - SLF • DC Current Max.: 0.6A ~ 1.6A • Inductance Range: 10µH ~ 2mH • Tolerance: ±30% and ±50% • Size available: 9.2x6.0x5.0mm L1 1 2 Electrode 4 • • 3 L2 Magnetic Inner Coating Wire High Current - KQC • Low DC resistance, high allowable DC current • Inductance Range: 0.8nH ~ 27nH • Tolerance: ±0.1nH, ±0.2nH or ±2%, ±5% • Sizes available: 0402, 0403 & 0603 Power - SDR • DC Current: 2A ~ 0.2A • Inductance Range: 1.5µH ~ 1200µH • Sizes: 0603, 0640, 0805, 1006, 0906 • Tolerance: ±10%, ±15%, ±20% SDR • Polarity Multilayer Ceramic Inductor - MHL • Q Min.: 8 ~ 12 • Inductance Range: 1.0nH ~ 220nH • Tolerance: 0.3nH & ±5% • Sizes available: 0402, 0603 Solder Plating Ni Plating Ceramic Magnet Substrate Wire Shielded - SDS • DC Current Max.: 0.07A ~ 7.5A • Inductance Range: 2.2µH ~ 15mH • Tolerance: ±10% ~ ±20% C • Sizes available: 8x10.5 ~ 12.7x12.7mm Height: 2.7 ~ 8mm 101 Thick Film Low-ohm - SR73 Series • Resistance Range: 24mΩ ~ 10Ω • Tolerance: ±0.5% ~ ±5% • 0201, 0402 ~ 2512 chip sizes • T.C.R.: ±100 ~ ±1000 ppm/°C Current Sense Resistors Silver Metallization Electrodes Terminations (Metallization Bands) Marking Protective Coating Resistor Networks Isolated - RIA, RNI, Bussed RBA, Custom type RNX, HD(X) • Precision value matching • Tight Tolerance: ±0.1% ~ ±5% • T.C.R. matching RIA - Isolated (8 ~ 24 Pins) Inner Electrode Coil Pattern Resistor/Capacitor Networks Thin Film - AC(X) & CR(X) • AC terminator • High frequency capacitor technology • Improves signal quality • Lowers power dissipation Filter Network - TFA & TFB • ESD protection • Low pass filter • Robust thin film technology Electrode Ceramic Substrate ACB - 20 Pins Insulation Direction Mark Film Transponder Coils NEW LF Antenna KT Transponder coil for recieving • High sensitivity and high Q • Strong fixing strength by 4 electrode terminals • Inductance Range: NEW 2.4mH, 7.2mH, 12mH • Sensitivity: ~ 75mV/µT • Sizes available: 11.8x3.6x3.0mm NEW Transponder Coil - KTZ1030 • Impact resistance due to 4 electrode terminal and unique coil structure • Nominal Inductance: 7.6µH • Sensitivity: 33mV/µT • Sizes available: 10.1x10.0x3.2mm RBA - Bussed (8 ~ 24 Pins) TFA - 20 Pins RNX - Customized (8 ~ 24 Pins) Standard - CZB • DC Current Max.: 800mA ~ 100mA • Impedance Range @100MHz: 10Ω ~ 2000Ω • Tolerance: ±25% • Sizes available: 0402 ~ 1206 High Power - CZP • DC Current Max.: 1A ~ 4A • Impedance Range @100MHZ: 19Ω ~ 1000Ω • Tolerance: ±25% • Sizes available: 0603 ~ 1206 Solder Plating Ni Plating Negative Temperature Characteristics Silver Metallization Electrodes Terminations (Metallization Bands) • • • • • • • • • Stack accuracy <20µm Line width as low as 60µm Line-to-line spacing as low as 60µm Cavity flatness <25µm Cavity width: 600µm min. Cavity depth: 100µm min. Cavity wall thickness: 500µm min. Flexural/bonding strength: 250MPa Thermal coefficient expansion (TCE): 5.5x10-6/K • Thermal conductivity: 3W/m-K • Minimum insulation resistance: 1x1013Ω - cm • Density: 2.8g/cm3 • Max. surface roughness (Ra): 0.4µm • Min. withstanding voltage: 15000V/µm • Fired layer thickness: 80µm, 100µm, 125µm • Via diameter: 100µm, 150µm, 200µm Applications: • MEMS packages • High frequency-microwave, milliwave • Harsh environment - high temperature, high humidity • Mobile communications • Multi chip modules Diode Networks Different resistance combinations available Thin Film Ferrite Beads Low Temperature Co-Fired Ceramic LTCC-KLC Networks - RTX • Available in SCSI & PECL terminations • High level of integration RTY - Divider (SOT-23) ESD Suppressors - ED(X) & PGD • ESD protection • IEC-61110-4-2 compliant • Bidirectional • ED(X): Multi-channel array format Diode Terminator - DNA & DN(X) • ESD protection • IEC-61000-4-2 compliant • Low capacitance Cross-Sectional Structure IC Chip Cavity Buried Via conductor pattern Inductor Thermal Via Inner layer DN5 Precision Voltage - RTY & CNN • Ratio matching • Tolerance: ±0.05% & ±0.1% • T.C.R. matching Thick Film - MRGF16 Resistor • Standard circuits • Low profile: 2.2mm or lower BGA (ball grid array) - BR • High level of integration • Low inductance 1 Cavity SMD Capacitor Hybrid IC KA - Hybrid IC Series • High density mounting by bonding (COB) • Adjusted processes are decreased by function and ratio trimmings • Substrate materials: Al2O3 alumina and glass epoxy • Printing: Conductor Resistance: Ag-Pd: 18mW/ /15µm Heat Shock: -55°C ~ +125°C, 300 cycles RuO2: 5W ~ 10MW, +100x10-6/K • Mounting: Conductor Resistance: Ag-Pt: 5mW/ /10µM Heat Shock: -55°C ~ +125°C, 500 cycles RuO2: 5W ~ 10MW, +100x10-6/K • Various types of packaging available Applications: • Automotive applications - ECU, power windows • Power supply - DC/DC converters, AC/DC converters, stabilizer • Industrial devices - control circuits • Telecommunication equipment telephone switchboard, LAN, tranceivers, VCO, VTXO Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Ultra-low Ohm - UR73 Series • Resistance Range: 10mΩ ~ 100mΩ • Tolerance: ±1% • Low T.C.R.: 100 ~ 500 ppm/°C • Sizes available: 0402 ~ 2512 Wide terminal - WK73S Series • Robust Thermal Cycle characteristic • Power Rating: .75W ~ 1.5W • Resistance Range: 10mΩ ~ 9.1Ω • Tolerance: ±1% & ±5% • T.C.R.: ±100, ±200, ±300 and ±800 ppm/°C • Sizes available: 0612, 1020, 1218 & 1225 Circuit Protection & Thermal Sensor Inductors Integrated Components Four basic types of current sensing resistors are available in low-ohm, high precision, 4-terminal Kelvin, high power, low profile, high frequency, high heat, and power shunt chips for a wide range of detecting applications and power applications. Complementing our flat chip resistors is a complete line of circuit protection products including thermistors, platinum sensors, chip and ceramic case fuses and metal oxide varistors. Magnetic solutions cover an application range from RF to power by using ferrite, ceramic, thin film, wirewound, choke coil and transponder coil technology. Improve performance, save space and lower costs by combining components using our thin film, silicon based, multi-element technology. Molded Metal Plate Power Shunt Compliant Lead - Frame SL/TSL/SLN/SLZ Series • Non-wirewound, excellent for high frequency • Enhanced thermal shock capability • Operating Temperature: up to +180°C • Power Rating: 0.75W, 1W, 2W and 3W • SLZ - Zero Ohm, 1W • Resistance Range: 3mΩ ~ 22MΩ • Tolerance: ±0.5% ~ ±5% • T.C.R.: 75 ~ 200 ppm/°C TLR Series • Resistance Range: 1mΩ ~ 20mΩ • Tolerance: ±1%, ±2% & ±5% • Sizes available: NEW 0402, 1206, 2010, 2512 • NEW 0805: 1W, Tolerance: ±1%, Resistance Range: 5mΩ ~ 10mΩ • T.C.R.: ±75 and ±100 ppm/°C • Ultra Low Height: 0.6mm • Power Rating: 0.2W, 0.5W, 1W & 2W High power - PSB Series • Power Rating: 6W • Resistance Range: 0.75mΩ & 1mΩ • Tolerance: ±1% • T.C.R.: ±75 ppm/°C Solder Metal plate terminal - NPR Series • Power Rating: 1W & 2W • Resistance Range: 3.9mΩ ~ 22MΩ • Tolerance: ±1%, ±5% & ±10% Four-terminal - CSR Series • Suitable for Kelvin applications • Power Rating: 1W & 2W • Resistance Range: 5mΩ ~ 50mΩ • Tolerance: ±0.5% & ±1% • Low T.C.R.: 50 ppm/°C Molded Resin Inner Resistive Electrode Film Protective Coating Ceramic Substrate Protective Coating Molded Resistive Resin Element Voltage Electrode Resistive Element Current Electrode TLRH Series • Carrier metal plate inside, resistor of high radiation of heat structure • Resistance Range: 10mΩ ~ 250mΩ • Tolerance: ±1% • T.C.R.: ±50 ppm/°C, ±75 ppm/°C • Sizes available: 0805, 2512 2010 (UNDER DEVELOPMENT) LR72 Series • Power Rating: 1/4W, 1/2W & 1W • Resistance Range: 2mΩ ~ 8mΩ • Tolerance: ±5% • Custom configurations available LR72A Sn Plating Electrode High power - PSI Series • Power Rating: 3W • Resistance Range: 1mΩ ~ 4mΩ • Tolerance: ±1% • T.C.R.: ±50 and ±75 ppm/°C High power - PSE Series • Power Rating: 3W • Resistance Range: NEW 2mΩ, 0.5mΩ, 1mΩ,1.5mΩ • Tolerance: ±5% • T.C.R.: ±150 ppm/°C LR72B Copper Nickel Alloy LR72C Copper Nickel Alloy Termination Custom Milliohm - LR Series • Resistance Range: 3mΩ ~ 100mΩ • All custom made parts • Max. Current Rating: 3A ~ 21A • Tolerance: ±3% and ±5% Ni Plating Protective Coating Fuses Fusing Flat Chip Resistors - RF73 • Resistance Range: 0.2Ω ~ 510Ω • Tolerance: ±5% • Sizes available: 0603 ~ 2512 • UL1412 approved: (0805 ~ 2512 sizes) Secondary Circuit Chip Fuses - TF • Rated Current: from .2A ~ 5A • Rated Voltage: 24V & 32V • Sizes available: 0402, 0603 • TF16VN for Automotive (UNDER DEVELOPMENT) • Anti-pulse type available (0603) • UL248.14, c-UL(CSA)C22.2 approved Platinum Inner Thin Film Electrode Ceramic Substrate Sn Plating Axial Type - SDT101A/SDT101B • -55°C ~ +300°C Operating temperature +0.05% resistance change for 300 cycles • Resistance Range: 10Ω, 100Ω, 500Ω • Tolerance: ±0.5% and ±1% • T.C.R.: +3500 ppm/°C Platinum Ceramic Thin Film Core Ni Plating Protective Coating Inner Fuse Element Electrode Ceramic Substrate CCP • Rated Current: from 0.4A ~ 5.0A • Rated Voltage: 24V & 76V • Sizes available: 1206 & 1210 • UL248.14, c-UL(CSA)C22.2 approved Electrode Solder Marking (A only) Resistive Element BLR Series • Flame retardant ceramic case • Resistance Range: 8mΩ ~ 50mΩ • Tolerance: ±5% and ±10% • Power Rating: 1W, 2W & 15W • T.C.R.: ±100 ppm/°C BPR Series • Leaded flame retardant ceramic case • Resistance Range: 10mΩ ~ 1Ω • Tolerance: ±5% and ±10% • Power Rating: 2W ~ 10W • T.C.R.: ±350 ppm/°C Resistor Element Cement Ceramic Case Trimming Line Molded Resin Radial Type - SDT310 • T.C.R. in accordance with DIN EN/IEC 60751 • Resistance Range: 100Ω, 500Ω, 1KΩ • Tolerance of Measuring Temp: Down to ±(0.15 + 0.002 |t|)°C |t|: Absolute value of a degree centigrade • Temperature Range: -55°C ~ +650°C Lead Weld Reinforcing Coating Protective Coating Platinum Thin Film Ceramic Substrate Electrode Electrode Lead Cap Wire Insulation Coating Ceramic Copper Nickel Alloy Solder Plating Ni Plating Chip Type Sensor - SDT73H /SDT73V • T.C.R. in accordance with DINEN/IEC 60751 • V Series - AECQ200 standard • Resistance Range: 100Ω & 500Ω • Tolerance: ±0.2% and ±1% • T.C.R.: +3850 ppm/°C Solder Resistive Element Resistive Element Termination Electrode Protective Coating Platinum Thermal Sensors Lead Wire Welding Point Custom Configurations - ST Series/AFS Units • Customer configurations based on use of SDT101 and SDT310 products Applications for Temperature Compensation • Automotives • Sensor Drive Controls • Telecommunications • Measuring Equipments Buffer Fuse Element Primary Circuit Chip Fuse - CCF • Up to 125V AC and 60V DC • UL248.14, c-UL(CSA)C22.2 approved • NEW CCF1F series IEC606127 Fast acting fuse • Rated Current: 0.4A ~ 15A • Sizes available: 2410 Thermal Fuse, Power Type - WF • Rated Current: 2A & 10A • Rated Voltage: 250V • Resistance Range: 1Ω ~ 10kΩ • UL1412 approved (4.7Ω ~ 100Ω) Varistors Thermal Sensors Wirewound Choke Coils Choke Coils Thin Film NEW Load Dump Style - NV73DS • Meets JASO load dump surge test • Varistors Voltage: 27 & 47 • Maximum Energy: 10J Metal Oxide Varistors Chip Type NV73 • Protects against static electricity, switching and incoming surges • Varistor Voltage: 8V ~ 150V • Sizes available: 0201 ~ 2220 • 3pF available • Maximum Energy: 0.005J ~ 12.0J Automotive Style - NV73DL • Low leakage current • Operating Temperature: up to +125°C • Maximum Energy: 0.1J ~ 1.5J • Varistors Voltage: 12 ~ 82V1mA • Sizes available: 0603, 0805 & 1206 Thin Film Flat Chip Linear - PTC LT73/LP73 • LT73 available in 25 T.C.R. & wide resistance • NEW LT73V for automotive • LP73 available high resistance can be made even with high T.C.R. (1206: 10k ohm T.C.R. ±5000) & tight tolerance • Resistance Range: 51Ω ~ 51KΩ • Tolerance: ±1% ~ ±5% • T.C.R.: +150 ~ +5000 ppm/°C • Sizes available: 0603, 0805 & 1206 1210 Molded - KL32 • Flat-top design • High Q with wirewound structure • Inductance Range: 0.005µH to 330µH • Tolerance: ±5% ~ ±20% NEW Custom Wirewound Coil - LWA • Nominal Inductance: 550µH • Tolerance: ±5% • Sizes available: 1006 NEW Choke Coil Inductor - LCM1060 • Delivers low DC, high allowable current and low leakage magnetic flux • DC Resistance Max.: 10.64MΩ ~ 892MΩ • Nominal Inductance: 1.5µH ~ 470µH • Tolerance: ±20%, ±30% Thin Film Inductor - KL73 • DC Resistance Max: 0.1Ω ~ 5Ω • Inductance Range: .56nH ~ 100nH • Tolerance: ±0.1nH, ±0.2nH or ±2%, ±5% • Sizes available: 0402 ~ 1206 Sn Plating Ni Plating Varistor Element Inner Side Electrode Metal Oxide Varistors Disc Type - NVD • Higher surge current • Absorbs positive and negative surges • Varistor Voltage: 18V ~ 1800V • Disc diameters of 05, 07, 10, 14 & 20 • Maximum Energy: 0.3J ~ 360J • UL1449 3rd Edition approved • UL1414, c-UL1414 approved 1 2 Lead Wire NEW Temperature Protection Resistor - TPR • Quickly fuses to the overhead • Terminal Temperature Under Rated Load: +125°C or less • Power Rating: 1W • Resistance Range: 2Ω ~ 10KΩ Automotive Style - LT73V • AEC-Q200 data is available • Temperature Range: -55°C ~ ±155°C • Resistance Range: 51Ω ~ 22KΩ • T.C.R.: +150 ~ +4500 • Sizes available: 0805 & 1206 Thick Film Flat Chip Linear - PTC/LA73 • Available in 13 specifiable temperature characteristics • Resistance Range: 22Ω ~ 10KΩ • Tolerance: ±5% • Sizes available: 0603, 0805 & 1206 Chip Positive Thermistor - PT72 • 3 Curie Temperatures: 70°C, 80°C & 100°C • Resistance Range: 50Ω, 120Ω, 470Ω & 1KΩ • Sizes available: 0603 & 0805 Temperature Characteristics 3 4 Ceramic Case Cement Thermal Fuse Resistor Inner Electrode Positive Temperature Characteristics 1. Insulation coating 2. Electrodes 3. Varistor element 4. Lead wire Flat Chip Negative Temperature - NT73 • 19 standard resistance values • Resistance Tolerance: ±5% ~ ±15% • B Constant Tolerance: ±3% ~ ±10% • Sizes available: 0603 ~ 1206 Negative Temperature Characteristics W H Magnetic Wire Electrode Magnet Ferrite Wire Core Molded Electrode Resin High Q - KQ/KQT • Ideal for low loss, high output power consumption • Q Factor Min.: 15 ~ 65 • Inductance Range: 1.0nH ~ 10µH • Tolerance: ±0.1nH, ±0.2nH or ±2% ~ ±20% • Sizes available: 0402, 0603, 0805 & 1008 Magnetic Inner Coating Wire Power - LPC • DC Current Max.: 0.14A ~ 10A • Inductance Range: 0.68µH ~ 6.8mH `• Sizes: 4045, 9040, 1065, 12065 • Tolerance: ±10% ~ ±30% Common Mode Choke Coil - SLF • DC Current Max.: 0.6A ~ 1.6A • Inductance Range: 10µH ~ 2mH • Tolerance: ±30% and ±50% • Size available: 9.2x6.0x5.0mm 1 Power - SDR • DC Current: 2A ~ 0.2A • Inductance Range: 1.5µH ~ 1200µH • Sizes: 0603, 0640, 0805, 1006, 0906 • Tolerance: ±10%, ±15%, ±20% 2 Coil Pattern Ceramic Substrate • Polarity Ceramic Inductor - MHL • Q Min.: 8 ~ 12 • Inductance Range: 1.0nH ~ 220nH • Tolerance: 0.3nH & ±5% • Sizes available: 0402, 0603 Electrode ACB - 20 Pins Insulation Direction Mark Film NEW LF Antenna KT Transponder coil for recieving • High sensitivity and high Q • Strong fixing strength by 4 electrode terminals • Inductance Range: NEW 2.4mH, 7.2mH, 12mH • Sensitivity: ~ 75mV/µT • Sizes available: 11.8x3.6x3.0mm TFA - 20 Pins RNX - Customized (8 ~ 24 Pins) Different resistance combinations available Electrodes Thin Film Electrode Magnetic flux of KT Electrode Land pattern Standard - CZB • DC Current Max.: 800mA ~ 100mA • Impedance Range @100MHz: 10Ω ~ 2000Ω • Tolerance: ±25% • Sizes available: 0402 ~ 1206 High Power - CZP • DC Current Max.: 1A ~ 4A • Impedance Range @100MHZ: 19Ω ~ 1000Ω • Tolerance: ±25% • Sizes available: 0603 ~ 1206 Electrodes Terminations (Metallization Bands) Low Temperature Co-Fired Ceramic LTCC-KLC • • • • • • • • • Stack accuracy <20µm Line width as low as 60µm Line-to-line spacing as low as 60µm Cavity flatness <25µm Cavity width: 600µm min. Cavity depth: 100µm min. Cavity wall thickness: 500µm min. Flexural/bonding strength: 250MPa Thermal coefficient expansion (TCE): 5.5x10-6/K • Thermal conductivity: 3W/m-K • Minimum insulation resistance: 1x1013Ω - cm • Density: 2.8g/cm3 • Max. surface roughness (Ra): 0.4µm • Min. withstanding voltage: 15000V/µm • Fired layer thickness: 80µm, 100µm, 125µm • Via diameter: 100µm, 150µm, 200µm Applications: • MEMS packages • High frequency-microwave, milliwave • Harsh environment - high temperature, high humidity • Mobile communications • Multi chip modules Diode Networks Silver Metallization Ferrite Beads Shielded Power Chip Inductor - LKS • Inductance Range: 3.3µH ~ 1000µH • Extremely little leakage magnetic flux • DC Current Max.: 0.4A ~ 6.6A • DC Resistance Max.: 11mΩ ~ 2576mΩ • Tolerance: ±20% ~ ±30% • Sizes available: 7.5x7.5 ~ 12.5x12.5mm Height: 4.5 ~ 6mm RBA - Bussed (8 ~ 24 Pins) Solder Plating Ni Plating Terminations (Metallization Bands) Shielded - SDS • DC Current Max.: 0.07A ~ 7.5A • Inductance Range: 2.2µH ~ 15mH • Tolerance: ±10% ~ ±20% C • Sizes available: 8x10.5 ~ 12.7x12.7mm Height: 2.7 ~ 8mm Thin Film - AC(X) & CR(X) • AC terminator • High frequency capacitor technology • Improves signal quality • Lowers power dissipation Filter Network - TFA & TFB • ESD protection • Low pass filter • Robust thin film technology Transponder Coils 3 L2 SDR Ceramic Magnet Substrate Wire RIA - Isolated (8 ~ 24 Pins) Inner Electrode Molded Resin High Current - KQC • Low DC resistance, high allowable DC current • Inductance Range: 0.8nH ~ 27nH • Tolerance: ±0.1nH, ±0.2nH or ±2%, ±5% • Sizes available: 0402, 0403 & 0603 Isolated - RIA, RNI, Bussed RBA, Custom type RNX, HD(X) • Precision value matching • Tight Tolerance: ±0.1% ~ ±5% • T.C.R. matching Resistor/Capacitor Networks 4 • • Multilayer Electrode Marking Protective Coating Resistor Networks L1 LPC 101 Thick Film Low-ohm - SR73 Series • Resistance Range: 24mΩ ~ 10Ω • Tolerance: ±0.5% ~ ±5% • 0201, 0402 ~ 2512 chip sizes • T.C.R.: ±100 ~ ±1000 ppm/°C Current Sense Resistors NEW Transponder Coil - KTZ1030 • Impact resistance due to 4 electrode terminal and unique coil structure • Nominal Inductance: 7.6µH • Sensitivity: 33mV/µT • Sizes available: 10.1x10.0x3.2mm Ferrite Core Magnetic Wire Solder Plating Ni Plating Resinic Base Silver Metallization Electrode Networks - RTX • Available in SCSI & PECL terminations • High level of integration RTY - Divider (SOT-23) ESD Suppressors - ED(X) & PGD • ESD protection • IEC-61110-4-2 compliant • Bidirectional • ED(X): Multi-channel array format Diode Terminator - DNA & DN(X) • ESD protection • IEC-61000-4-2 compliant • Low capacitance Cross-Sectional Structure IC Chip Cavity Buried Via conductor pattern Inductor Thermal Via Inner layer DN5 Precision Voltage - RTY & CNN • Ratio matching • Tolerance: ±0.05% & ±0.1% • T.C.R. matching Thick Film - MRGF16 Resistor • Standard circuits • Low profile: 2.2mm or lower BGA (ball grid array) - BR • High level of integration • Low inductance 1 Cavity SMD Capacitor Hybrid IC KA - Hybrid IC Series • High density mounting by bonding (COB) • Adjusted processes are decreased by function and ratio trimmings • Substrate materials: Al2O3 alumina and glass epoxy • Printing: Conductor Resistance: Ag-Pd: 18mW/ /15µm Heat Shock: -55°C ~ +125°C, 300 cycles RuO2: 5W ~ 10MW, +100x10-6/K • Mounting: Conductor Resistance: Ag-Pt: 5mW/ /10µM Heat Shock: -55°C ~ +125°C, 500 cycles RuO2: 5W ~ 10MW, +100x10-6/K • Various types of packaging available Applications: • Automotive applications - ECU, power windows • Power supply - DC/DC converters, AC/DC converters, stabilizer • Industrial devices - control circuits • Telecommunication equipment telephone switchboard, LAN, tranceivers, VCO, VTXO Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Ultra-low Ohm - UR73 Series • Resistance Range: 10mΩ ~ 100mΩ • Tolerance: ±1% • Low T.C.R.: 100 ~ 500 ppm/°C • Sizes available: 0402 ~ 2512 Wide terminal - WK73S Series • Robust Thermal Cycle characteristic • Power Rating: .75W ~ 1.5W • Resistance Range: 10mΩ ~ 9.1Ω • Tolerance: ±1% & ±5% • T.C.R.: ±100, ±200, ±300 and ±800 ppm/°C • Sizes available: 0612, 1020, 1218 & 1225 Circuit Protection & Thermal Sensor Inductors Integrated Components Four basic types of current sensing resistors are available in low-ohm, high precision, 4-terminal Kelvin, high power, low profile, high frequency, high heat, and power shunt chips for a wide range of detecting applications and power applications. Complementing our flat chip resistors is a complete line of circuit protection products including thermistors, platinum sensors, chip and ceramic case fuses and metal oxide varistors. Magnetic solutions cover an application range from RF to power by using ferrite, ceramic, thin film, wirewound, choke coil and transponder coil technology. Improve performance, save space and lower costs by combining components using our thin film, silicon based, multi-element technology. Molded Metal Plate Power Shunt Compliant Lead - Frame SL/TSL/SLN/SLZ Series • Non-wirewound, excellent for high frequency • Enhanced thermal shock capability • Operating Temperature: up to +180°C • Power Rating: 0.75W, 1W, 2W and 3W • SLZ - Zero Ohm, 1W • Resistance Range: 3mΩ ~ 22MΩ • Tolerance: ±0.5% ~ ±5% • T.C.R.: 75 ~ 200 ppm/°C TLR Series • Resistance Range: 1mΩ ~ 20mΩ • Tolerance: ±1%, ±2% & ±5% • Sizes available: NEW 0402, 1206, 2010, 2512 • NEW 0805: 1W, Tolerance: ±1%, Resistance Range: 5mΩ ~ 10mΩ • T.C.R.: ±75 and ±100 ppm/°C • Ultra Low Height: 0.6mm • Power Rating: 0.2W, 0.5W, 1W & 2W High power - PSB Series • Power Rating: 6W • Resistance Range: 0.75mΩ & 1mΩ • Tolerance: ±1% • T.C.R.: ±75 ppm/°C Solder Metal plate terminal - NPR Series • Power Rating: 1W & 2W • Resistance Range: 3.9mΩ ~ 22MΩ • Tolerance: ±1%, ±5% & ±10% Four-terminal - CSR Series • Suitable for Kelvin applications • Power Rating: 1W & 2W • Resistance Range: 5mΩ ~ 50mΩ • Tolerance: ±0.5% & ±1% • Low T.C.R.: 50 ppm/°C Voltage Electrode Molded Resistive Resin Element Inner Resistive Electrode Film Protective Coating Ceramic Substrate Protective Coating Molded Resistive Resin Element Current Electrode TLRH Series • Carrier metal plate inside, resistor of high radiation of heat structure • Resistance Range: 10mΩ ~ 250mΩ • Tolerance: ±1% • T.C.R.: ±50 ppm/°C, ±75 ppm/°C • Sizes available: 0805, 2512 2010 (UNDER DEVELOPMENT) LR72 Series • Power Rating: 1/4W, 1/2W & 1W • Resistance Range: 2mΩ ~ 8mΩ • Tolerance: ±5% • Custom configurations available LR72A Sn Plating Electrode High power - PSI Series • Power Rating: 3W • Resistance Range: 1mΩ ~ 4mΩ • Tolerance: ±1% • T.C.R.: ±50 and ±75 ppm/°C High power - PSE Series • Power Rating: 3W • Resistance Range: NEW 2mΩ, 0.5mΩ, 1mΩ,1.5mΩ • Tolerance: ±5% • T.C.R.: ±150 ppm/°C LR72B Copper Nickel Alloy LR72C Copper Nickel Alloy Termination Custom Milliohm - LR Series • Resistance Range: 3mΩ ~ 100mΩ • All custom made parts • Max. Current Rating: 3A ~ 21A • Tolerance: ±3% and ±5% Ni Plating Protective Coating Fuses Fusing Flat Chip Resistors - RF73 • Resistance Range: 0.2Ω ~ 510Ω • Tolerance: ±5% • Sizes available: 0603 ~ 2512 • UL1412 approved: (0805 ~ 2512 sizes) Secondary Circuit Chip Fuses - TF • Rated Current: from .2A ~ 5A • Rated Voltage: 24V & 32V • Sizes available: 0402, 0603 • TF16VN for Automotive (UNDER DEVELOPMENT) • Anti-pulse type available (0603) • UL248.14, c-UL(CSA)C22.2 approved Platinum Inner Thin Film Electrode Ceramic Substrate Sn Plating Axial Type - SDT101A/SDT101B • -55°C ~ +300°C Operating temperature +0.05% resistance change for 300 cycles • Resistance Range: 10Ω, 100Ω, 500Ω • Tolerance: ±0.5% and ±1% • T.C.R.: +3500 ppm/°C Platinum Ceramic Thin Film Core Ni Plating Protective Coating Inner Fuse Element Electrode Ceramic Substrate CCP • Rated Current: from 0.4A ~ 5.0A • Rated Voltage: 24V & 76V • Sizes available: 1206 & 1210 • UL248.14, c-UL(CSA)C22.2 approved Electrode Solder Marking (A only) Resistive Element BLR Series • Flame retardant ceramic case • Resistance Range: 8mΩ ~ 50mΩ • Tolerance: ±5% and ±10% • Power Rating: 1W, 2W & 15W • T.C.R.: ±100 ppm/°C BPR Series • Leaded flame retardant ceramic case • Resistance Range: 10mΩ ~ 1Ω • Tolerance: ±5% and ±10% • Power Rating: 2W ~ 10W • T.C.R.: ±350 ppm/°C Resistor Element Cement Ceramic Case Trimming Line Molded Resin Radial Type - SDT310 • T.C.R. in accordance with DIN EN/IEC 60751 • Resistance Range: 100Ω, 500Ω, 1KΩ • Tolerance of Measuring Temp: Down to ±(0.15 + 0.002 |t|)°C |t|: Absolute value of a degree centigrade • Temperature Range: -55°C ~ +650°C Lead Weld Reinforcing Coating Protective Coating Platinum Thin Film Ceramic Substrate Electrode Electrode Lead Cap Wire Insulation Coating Ceramic Copper Nickel Alloy Solder Plating Ni Plating Chip Type Sensor - SDT73H /SDT73V • T.C.R. in accordance with DINEN/IEC 60751 • V Series - AECQ200 standard • Resistance Range: 100Ω & 500Ω • Tolerance: ±0.2% and ±1% • T.C.R.: +3850 ppm/°C Solder Resistive Element Resistive Element Termination Electrode Protective Coating Platinum Thermal Sensors Lead Wire Welding Point Custom Configurations - ST Series/AFS Units • Customer configurations based on use of SDT101 and SDT310 products Applications for Temperature Compensation • Automotives • Sensor Drive Controls • Telecommunications • Measuring Equipments Buffer Fuse Element Primary Circuit Chip Fuse - CCF • Up to 125V AC and 60V DC • UL248.14, c-UL(CSA)C22.2 approved • NEW CCF1F series IEC606127 Fast acting fuse • Rated Current: 0.4A ~ 15A • Sizes available: 2410 Thermal Fuse, Power Type - WF • Rated Current: 2A & 10A • Rated Voltage: 250V • Resistance Range: 1Ω ~ 10kΩ • UL1412 approved (4.7Ω ~ 100Ω) Varistors Thermal Sensors Wirewound Choke Coils Choke Coils Thin Film NEW Load Dump Style - NV73DS • Meets JASO load dump surge test • Varistors Voltage: 27 & 47 • Maximum Energy: 10J Metal Oxide Varistors Chip Type NV73 • Protects against static electricity, switching and incoming surges • Varistor Voltage: 8V ~ 150V • Sizes available: 0201 ~ 2220 • 3pF available • Maximum Energy: 0.005J ~ 12.0J Automotive Style - NV73DL • Low leakage current • Operating Temperature: up to +125°C • Maximum Energy: 0.1J ~ 1.5J • Varistors Voltage: 12 ~ 82V1mA • Sizes available: 0603, 0805 & 1206 Thin Film Flat Chip Linear - PTC LT73/LP73 • LT73 available in 25 T.C.R. & wide resistance • NEW LT73V for automotive • LP73 available high resistance can be made even with high T.C.R. (1206: 10k ohm T.C.R. ±5000) & tight tolerance • Resistance Range: 51Ω ~ 51KΩ • Tolerance: ±1% ~ ±5% • T.C.R.: +150 ~ +5000 ppm/°C • Sizes available: 0603, 0805 & 1206 1210 Molded - KL32 • Flat-top design • High Q with wirewound structure • Inductance Range: 0.005µH to 330µH • Tolerance: ±5% ~ ±20% NEW Custom Wirewound Coil - LWA • Nominal Inductance: 550µH • Tolerance: ±5% • Sizes available: 1006 NEW Choke Coil Inductor - LCM1060 • Delivers low DC, high allowable current and low leakage magnetic flux • DC Resistance Max.: 10.64MΩ ~ 892MΩ • Nominal Inductance: 1.5µH ~ 470µH • Tolerance: ±20%, ±30% Shielded Power Chip Inductor - LKS • Inductance Range: 3.3µH ~ 1000µH • Extremely little leakage magnetic flux • DC Current Max.: 0.4A ~ 6.6A • DC Resistance Max.: 11mΩ ~ 2576mΩ • Tolerance: ±20% ~ ±30% • Sizes available: 7.5x7.5 ~ 12.5x12.5mm Height: 4.5 ~ 6mm Thin Film Inductor - KL73 • DC Resistance Max: 0.1Ω ~ 5Ω • Inductance Range: .56nH ~ 100nH • Tolerance: ±0.1nH, ±0.2nH or ±2%, ±5% • Sizes available: 0402 ~ 1206 Sn Plating Ni Plating Varistor Element Inner Side Electrode Metal Oxide Varistors Disc Type - NVD • Higher surge current • Absorbs positive and negative surges • Varistor Voltage: 18V ~ 1800V • Disc diameters of 05, 07, 10, 14 & 20 • Maximum Energy: 0.3J ~ 360J • UL1449 3rd Edition approved • UL1414, c-UL1414 approved 1 2 Lead Wire NEW Temperature Protection Resistor - TPR • Quickly fuses to the overhead • Terminal Temperature Under Rated Load: +125°C or less • Power Rating: 1W • Resistance Range: 2Ω ~ 10KΩ Automotive Style - LT73V • AEC-Q200 data is available • Temperature Range: -55°C ~ ±155°C • Resistance Range: 51Ω ~ 22KΩ • T.C.R.: +150 ~ +4500 • Sizes available: 0805 & 1206 Thick Film Flat Chip Linear - PTC/LA73 • Available in 13 specifiable temperature characteristics • Resistance Range: 22Ω ~ 10KΩ • Tolerance: ±5% • Sizes available: 0603, 0805 & 1206 Chip Positive Thermistor - PT72 • 3 Curie Temperatures: 70°C, 80°C & 100°C • Resistance Range: 50Ω, 120Ω, 470Ω & 1KΩ • Sizes available: 0603 & 0805 Temperature Characteristics 3 4 Ceramic Case Cement Thermal Fuse Resistor Inner Electrode Positive Temperature Characteristics 1. Insulation coating 2. Electrodes 3. Varistor element 4. Lead wire Flat Chip Negative Temperature - NT73 • 19 standard resistance values • Resistance Tolerance: ±5% ~ ±15% • B Constant Tolerance: ±3% ~ ±10% • Sizes available: 0603 ~ 1206 W H Magnetic Wire Electrode Magnet Ferrite Wire Core Molded Electrode Resin High Q - KQ/KQT • Ideal for low loss, high output power consumption • Q Factor Min.: 15 ~ 65 • Inductance Range: 1.0nH ~ 10µH • Tolerance: ±0.1nH, ±0.2nH or ±2% ~ ±20% • Sizes available: 0402, 0603, 0805 & 1008 Power - LPC • DC Current Max.: 0.14A ~ 10A • Inductance Range: 0.68µH ~ 6.8mH `• Sizes: 4045, 9040, 1065, 12065 • Tolerance: ±10% ~ ±30% LPC Common Mode Choke Coil - SLF • DC Current Max.: 0.6A ~ 1.6A • Inductance Range: 10µH ~ 2mH • Tolerance: ±30% and ±50% • Size available: 9.2x6.0x5.0mm L1 1 2 Electrode 4 • • 3 L2 Magnetic Inner Coating Wire High Current - KQC • Low DC resistance, high allowable DC current • Inductance Range: 0.8nH ~ 27nH • Tolerance: ±0.1nH, ±0.2nH or ±2%, ±5% • Sizes available: 0402, 0403 & 0603 Power - SDR • DC Current: 2A ~ 0.2A • Inductance Range: 1.5µH ~ 1200µH • Sizes: 0603, 0640, 0805, 1006, 0906 • Tolerance: ±10%, ±15%, ±20% SDR • Polarity Multilayer Ceramic Inductor - MHL • Q Min.: 8 ~ 12 • Inductance Range: 1.0nH ~ 220nH • Tolerance: 0.3nH & ±5% • Sizes available: 0402, 0603 Solder Plating Ni Plating Ceramic Magnet Substrate Wire Shielded - SDS • DC Current Max.: 0.07A ~ 7.5A • Inductance Range: 2.2µH ~ 15mH • Tolerance: ±10% ~ ±20% C • Sizes available: 8x10.5 ~ 12.7x12.7mm Height: 2.7 ~ 8mm 101 Thick Film Low-ohm - SR73 Series • Resistance Range: 24mΩ ~ 10Ω • Tolerance: ±0.5% ~ ±5% • 0201, 0402 ~ 2512 chip sizes • T.C.R.: ±100 ~ ±1000 ppm/°C Current Sense Resistors Silver Metallization Electrodes Terminations (Metallization Bands) Marking Protective Coating Resistor Networks Isolated - RIA, RNI, Bussed RBA, Custom type RNX, HD(X) • Precision value matching • Tight Tolerance: ±0.1% ~ ±5% • T.C.R. matching RIA - Isolated (8 ~ 24 Pins) Inner Electrode Coil Pattern Resistor/Capacitor Networks Thin Film - AC(X) & CR(X) • AC terminator • High frequency capacitor technology • Improves signal quality • Lowers power dissipation Filter Network - TFA & TFB • ESD protection • Low pass filter • Robust thin film technology Electrode Ceramic Substrate ACB - 20 Pins Insulation Direction Mark Film Transponder Coils NEW LF Antenna KT Transponder coil for recieving • High sensitivity and high Q • Strong fixing strength by 4 electrode terminals • Inductance Range: NEW 2.4mH, 7.2mH, 12mH • Sensitivity: ~ 75mV/µT • Sizes available: 11.8x3.6x3.0mm NEW Transponder Coil - KTZ1030 • Impact resistance due to 4 electrode terminal and unique coil structure • Nominal Inductance: 7.6µH • Sensitivity: 33mV/µT • Sizes available: 10.1x10.0x3.2mm RBA - Bussed (8 ~ 24 Pins) TFA - 20 Pins RNX - Customized (8 ~ 24 Pins) Standard - CZB • DC Current Max.: 800mA ~ 100mA • Impedance Range @100MHz: 10Ω ~ 2000Ω • Tolerance: ±25% • Sizes available: 0402 ~ 1206 High Power - CZP • DC Current Max.: 1A ~ 4A • Impedance Range @100MHZ: 19Ω ~ 1000Ω • Tolerance: ±25% • Sizes available: 0603 ~ 1206 Solder Plating Ni Plating Negative Temperature Characteristics Silver Metallization Electrodes Terminations (Metallization Bands) • • • • • • • • • Stack accuracy <20µm Line width as low as 60µm Line-to-line spacing as low as 60µm Cavity flatness <25µm Cavity width: 600µm min. Cavity depth: 100µm min. Cavity wall thickness: 500µm min. Flexural/bonding strength: 250MPa Thermal coefficient expansion (TCE): 5.5x10-6/K • Thermal conductivity: 3W/m-K • Minimum insulation resistance: 1x1013Ω - cm • Density: 2.8g/cm3 • Max. surface roughness (Ra): 0.4µm • Min. withstanding voltage: 15000V/µm • Fired layer thickness: 80µm, 100µm, 125µm • Via diameter: 100µm, 150µm, 200µm Applications: • MEMS packages • High frequency-microwave, milliwave • Harsh environment - high temperature, high humidity • Mobile communications • Multi chip modules Diode Networks Different resistance combinations available Thin Film Ferrite Beads Low Temperature Co-Fired Ceramic LTCC-KLC Networks - RTX • Available in SCSI & PECL terminations • High level of integration RTY - Divider (SOT-23) ESD Suppressors - ED(X) & PGD • ESD protection • IEC-61110-4-2 compliant • Bidirectional • ED(X): Multi-channel array format Diode Terminator - DNA & DN(X) • ESD protection • IEC-61000-4-2 compliant • Low capacitance Cross-Sectional Structure IC Chip Cavity Buried Via conductor pattern Inductor Thermal Via Inner layer DN5 Precision Voltage - RTY & CNN • Ratio matching • Tolerance: ±0.05% & ±0.1% • T.C.R. matching Thick Film - MRGF16 Resistor • Standard circuits • Low profile: 2.2mm or lower BGA (ball grid array) - BR • High level of integration • Low inductance 1 Cavity SMD Capacitor Hybrid IC KA - Hybrid IC Series • High density mounting by bonding (COB) • Adjusted processes are decreased by function and ratio trimmings • Substrate materials: Al2O3 alumina and glass epoxy • Printing: Conductor Resistance: Ag-Pd: 18mW/ /15µm Heat Shock: -55°C ~ +125°C, 300 cycles RuO2: 5W ~ 10MW, +100x10-6/K • Mounting: Conductor Resistance: Ag-Pt: 5mW/ /10µM Heat Shock: -55°C ~ +125°C, 500 cycles RuO2: 5W ~ 10MW, +100x10-6/K • Various types of packaging available Applications: • Automotive applications - ECU, power windows • Power supply - DC/DC converters, AC/DC converters, stabilizer • Industrial devices - control circuits • Telecommunication equipment telephone switchboard, LAN, tranceivers, VCO, VTXO Leaded Resistors Surface Mount Resistors The industry’s broadest line of leaded resistors and networks includes designs with various material composition and structure for use in general purpose, precision, anti-surge, high voltage, high resistance applications. Flat chip resistors and arrays include general purpose, high precision, laser trimmable, audio and surge, high voltage, high heat and zero ohm types for applications ranging from general purpose to ultra precision. Carbon Film General Purpose - Reduced Size and Flame Proof CF/CFS/CFP Series • Power Rating: 0.25W ~ 0.5W • Resistance Range: 2.2Ω ~ 5.1MΩ • Tolerance: ±2% and ±5% Special Power Film High Power Resistor - SPR and SPRX Series • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 110KΩ • Tolerance: ±1% ~ ±5% Metal Film General Purpose - Reduced Size MF/MFS/RK Series • Power Rating: 0.25W ~ 1W • Resistance Range: 1Ω ~ 100MΩ • Tolerance: ±0.5% ~ ±5% Precision - RNS Series • Power Rating: 0.125W ~ 1W • Resistance Range: 0.2Ω ~ 6.8MΩ • Tolerance: ±0.1% ~ ±1% Radial-Precision - LF/LFF/RK26 Series • Power Rating: 0.125W ~ 0.5W • Resistance Range: 1Ω ~ 33MΩ • Tolerance: ±0.5% ~ ±5% Precision Metal Film - MRP Series • Pair Resistor • Resistance Range: 50Ω ~100kΩ • Tolerance: ±0.1% ~ ±1% • Tolerance Ratio: 0.025% ~ 0.5% Molded Precision - SF Series • Power Rating: 0.125W ~ 0.5W • Resistance Range: 100Ω ~ 5.11MΩ • Tolerance: ±0.01% ~ ±0.5% Wirewound Power and Small Type - CW/CWP Series • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 430Ω • Tolerance: ±0.25% ~ ±10% • CW1SSCT52A100J: UL1412 approved Precision Power Type - CW-H Series • CWH meets MIL-PRF-26 (U characteristics) • Power Rating: 1W, 2W, 3W • Resistance Range: 0.47Ω ~ 3kΩ Precision Power - RW Series • Power Rating: 0.5W ~ 10W • Resistance Range: 0.1Ω ~ 62kΩ • Tolerance: ±0.5% ~ ±5% Power Rectangular Type - BGR, BWR Series • BGR with glass core • BWR with ceramic core • Power Rating: 1W ~ 40W • Resistance Range: 0.1Ω ~ 390Ω • Tolerance: ±1% ~ ±10% Leaded SIP Networks Ultra Precision - MRS • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.01% ~ ±0.5% • T.C.R. up to ±2.5ppm/°C Thick Film - RKC/RKH/RKL Series • Number of Pins: 3 ~ 16 • Resistance Range: 22Ω ~ 2.2MΩ • Tolerance: ±1% ~ ±5% • Customs available: ±0.5% Resistive Film Protective Coating Metal Oxide General Purpose - MO/MOX Series • Power Rating: 0.5W ~ 3W • Resistance Range: 0.2Ω ~ 150kΩ • Tolerance: ±2% and ±5% Reduced Size - MOS/MOSX Series • Power Rating: 0.5W ~ 5W • Resistance Range: 0.1Ω ~ 100kΩ • Tolerance: ±1% ~ ±5% Power Rectangular Type - BSR Series • Power Rating: 2W ~ 20W • Resistance Range: 430Ω ~ 75kΩ • Tolerance: ±5% Trimming Line Marking Glass Coating Lead Frame Ceramic Substrate Inner Electrode Zero Ohm/Jumper Conformal Coated - Z Series • Max. Amperage: 1.5A, 2.5A • Resistance: less than 20mΩ Molded - J Series • Max. Amperage: 8A, 10A • Resistance: 10mΩ Max. Jumper Wire - JL Series • Max. Current Rating: 8A, 10A End Cap Lead Wire Molded Resin Solder Plated Copper Wire Get On-Board with KOA Speer Your Ideal Partner for Passive Component Solutions Inner Insulation Resistive Coating Outer Film Coating Resin As you search for surface mount passive components that will ensure the optimum performance of your circuit design, count on the broad line of products from KOA Speer. Our engineering teams are developing a wide range of new smaller sizes and integrated packages to accommodate higher clock speeds and product downsizing. Our world class manufacturing facilities are poised to ramp up with new designs, allowing us to take them to market with the shortest of lead times. And our sophisticated warehousing and distribution system ensures the availability of components when you need them. Inner Electrode Ceramic Substrate Terminal Ceramic Fixed Power - PCF Series • Power Rating: 0.5W ~ 2W • Resistance Range: 3.3Ω ~ 390kΩ • Tolerance: ±10% and ±20% Ceramic Fixed Power - HPC Series • Power Rating: 0.5W ~ 5W • Resistance Range: 3.3Ω ~ 390kΩ • Tolerance: ±10% and ±20% Linear Positive Miniature Tempco Thermistor - LT Series • Resistance Range:100Ω ~ 39kΩ • Tolerance: ±5% • T.C.R.: +1000 ~ +4500 ppm/°C • T.C.R Tolerance: ±10%, ±15% Precision Linear - LP Series • Resistance Range: 1Ω ~ 100kΩ • T.C.R. Tolerance: ±5% ~ ±10% • Tolerance: ±1%, ±2% and ±5% • T.C.R.: +150 ~ +5000 ppm/°C Current Sensing Rectangular Type BPR Series • Power Rating: 2W ~ 10W • Resistance Range: 0.01Ω ~ 1Ω • Tolerance: ±5% and ±10% Ceramic Case Cement Resistive Element Type J Ceramic Core Resistive Film Insulation Coating Specialty Fixed Anti-Surge - RCR Series • RCR50EN meets EN60065 requirements • Overload Voltage up to 5,000V • Power Rating: 0.25W ~ 3W • Resistance Range: 3.3Ω ~ 100MΩ • Tolerance: ±1% and ±5% High Voltage - GS Series • Max. Working Voltage: 0.5kV ~ 40kV • Power Rating: 0.25W ~ 12W • Resistance Range: 0.5MΩ ~ 10GΩ • Tolerance: ±0.5% ~ ±10% SIP High Voltage - RK92 Series • Max. Working Voltage: 1kV ~ 10kV • Power Rating: 0.5W ~ 1.1W • Resistance Range: 1MΩ ~ 1GΩ • Tolerance: ±1% ~ ±20% Thick Film Thin Film General Purpose - RK73B • NEW 01005 chip size: Resistance Range: NEW 4.7Ω ~ 1MΩ • Tolerance: ±2% and ±5% • Resistance Range: 1Ω ~ 22MΩ Precision - RK73H • NEW 01005 chip size, +1% • Tolerance: ±0.5% and ±1% • Resistance Range: 1Ω ~ 10MΩ High Precision - RK73G • T.C.R.: ±50 ppm/°C • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.5% and ±1% Audio Chip - RK73A • Low current noise • Clarity in signal processing • Resistance Range: 2.2Ω ~ 1MΩ • Tolerance: ±2% and ±5% Zero Ohm - RK73Z • 01005 chip size • Maximum Resistance of 50mΩ • Maximum Continuous Current @70°C: 0.5A ~ 2.0A Ultra Precision - RN73 • Tolerance: ±0.05% ~ ±1% • Nickel chromium resistor element • Resistance Range: 10Ω ~ 1MΩ • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/°C Ultra Precision - RN73H • Rated Ambient Temperature +85°C • NEW 0402 chip size: Resistance Range: up to 300KΩ • NEW 0603: Resistance Range: up to NEW 1MΩ • Oper. Temp. Range -55°C to +155°C • Improved moisture resistance • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.05% ~ ±1% • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/°C Resistor Array Solder Plating Ni Plating Protective Coating Solder Plating Resistive Inner Film Electrode Ceramic Substrate Ni Plating st Protective Coating Quality 1 Ceramic Substrate • Sizes available: 01005, 0201, 0402, 0603, 0805, 1206, 1210, 2010, 2512 It’s a Way of Life You expect product quality from any component that makes it into one of your designs. But in today’s competitive global marketplace, there’s so much more to the quality equation. At KOA Speer, we’ve launched our Quality 1st initiative to reinforce our organization wide focus on serving you at the highest possible level. And our commitment to quality in everything we do is paying off… in the pastSPEER two yearsELECTRONICS, we’ve received ten major KOA INC.customer quality awards. Bolivar Drive, P.O. Box 547 Bradford, PA 16701 USA Bolivar Drive, P.O. Box 547 Phone: 814-362-5536 Bradford, PA 16701 Fax: 814-362-8883 Phone: 814-362-5536 KOAwww.koaspeer.com SPEER ELECTRONICS, INC. Fax: 814-362-8883 CERTIFIED www.koaspeer.com AHA 2/13 2.5M ©2013 KOA Speer Electronics, Inc. Resistive Inner Film Electrode CERTIFIED Printed in U.S.A. • Sizes available: 0402, 0603, 0805, 1206, 1210 Melf Carbon Film/Metal Film/ Zero Ohm • RD41 Carbon Film Series • RN41 & RM41 Metal Film Series • CC Zero Ohm Series Linear Positive Tempco - MLT • Series with 6 specifiable temperature coefficients • Resistance Range: 10Ω ~ 43kΩ • Tolerance: ±2% and ±5% • T.C.R.: +2000 ~ 3900 ppm/°C Fixed Ceramic - CPCN • Series is reliable in pulse transient applications • Power Rating: 0.5W, 1W, 1.5W and 2W • Resistance Range: 1kΩ ~ 15kΩ • Tolerance: ±20% Concave, Square Corner Isolated Network - CN • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% ~ ±5% • Sizes available: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x4 elements Bussed Network - CNB • Resistance Range: 1kΩ ~ 470kΩ • Tolerance: ±5% • Sizes available: 4 or 8 elements included in one array Bussed Network - CND • Reverse common electrode and side electrode type circuits available • Resistance Range: 22Ω ~ 100kΩ • Tolerance: ±5% • Sizes available: 0603, 0805 and 1206 x8 elements Zero Ohm Jumper - CNZ • Current Rating @70°C (per element): 0.5A and 1.0A • Sizes available: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x4, x8 elements Convex, Scalloped Corner Isolated Network - CN_A • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603, 1206 x4 elements Convex, Square Corner Isolated Network - CN_N • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±5% • Sizes available: 0201 x2, x4 elements Isolated Network - CN_K • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603 x2, x4, x8 elements, 0402, 1206 x2, x4 elements Protective Coating Electrode Resistive Film Inner Electrode Ceramic Substrate Specialty Surge Current - SG73 • 10x pulse power capability • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±10%, ±20% • Sizes available: 0603, 0805, 1206, 1210, 2010, 2512 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate NEW Pulse SG73P and Highly ESD Proof SG73S • Superior surge withstanding voltage and pulse withstanding voltage • Resistance Range: 1Ω ~ 10MΩ • Tolerance: ±0.5% ~ ±5% • Sizes available: 0402, 0603, 0805, 1206, 1210, 2010, 2512 Voltage SG73S SG73P 0 100ms~1us 1us~1ms Time High Voltage - HV73 • 2x rated working voltage of standard thick film • Maximum Working Voltage: 350V, 400V, 500V, 2kV(d.c.) and 3kV(d.c.) • Resistance Range: 10kΩ ~ 51MΩ • Tolerance: ±0.5% ~ ±5% • Sizes available: 0603, 0805, 1206, 2010, 2512 Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Wide Terminal - WK73 • Enhanced thermal performance • Power Rating: .75W, 1W & 1.5W • Resistance Range: 10mΩ ~ 1MΩ • Tolerance: ±1% and ±5% • T.C.R.: ±100, ±200, ±300 and ±800 ppm/°C • Size available: 0612, 1020, 1218, 1225 Anti-Sulfur • Excellent anti-sulfuration characteristics • High heat and weather resistance • Series available: RK73B, RK73H, CN, RK73Z, SG73