RC test point chip EU features • • • • • Surface-mountable chip type test terminal Automatic machine insertable Suitable for reflow and wave soldering Available in three standard sizes: 0603, 0805 or 1206 Products with lead-free terminations meet EU RoHS and China RoHS requirements • AEC-Q200 Qualified (RCU only) dimensions and construction RCU RCS RCT RCW L L W W b t a W t b Type L W L b t t b a Stainless Solder Steel Plating Stainless Steel Solder Plating a a Stainless Solder Plating Steel Stainless Steel Solder Plating L Note: Top surfaces of RCT and RCW are not solderable. New Part # L RCU (0603) .063 (1.6) .031 (0.8) .045 (1.15) .009 (0.23) .009 (0.23) RCT (0805) .079 (2.0) .049 (1.25) .057 (1.45) .009 (0.23) .018 (0.45) .126 (3.2) .063 (1.6) .049 (1.25) .009 (0.23) .009 (0.23) .079 (2.0) .009 (0.23) .018 (0.45) RCS (1206) RCW (1206) ordering information RCU Dimensions inches (mm) W t a (Inch Size Code) C TE Termination Material C: SnCu Type RCU RCT RCS RCW b Packaging TE: 7" embossed plastic (2,000 pieces/reel) TED: 10" embossed plastic (5,000 pieces/reel) RCW not available in TED For further information on packaging, please refer to Appendix A. circuit protection applications and ratings Part Designation Rated Current Standard Resistance Rated Ambient Temperature Operating Temperature Range 2 Amps 50mΩ or less +70°C -55°C to +125°C RCU RCT RCS RCW environmental applications Performance Characteristics Parameter Requirement Real R Limit Typical Resistance Resistance to Solder Heat Rapid Change of Temperature High Temperature Exposure Test Method 25°C 50mΩ Max. after the test 10mΩ Max. after the test 260°C ± 5°C, 10 seconds ± 1 second -55°C (30 minutes), +125°C (30 minutes), 100 cycles +125°C, 240 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 276 1/06/14 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com