CC6A-T1AH up to 200°C AT Crystal 16 MHz – 40 MHz DIMENSIONS Package: Bottom view 2,2 Suitable for Downhole application SMT ceramic package height 0.9 mm Fundamental mode up to 40MHz Extremes temperature ranges High stability and low aging High shock and vibration resistance Hermetically sealed Ultra low MSL Excellent solderability Swiss made quality Customer specification on request ELECTRICAL CHARACTERISTICS AT 25oC: 3 4 2 1 1,3 1,2 0,8 4 1 3 2 pin 2 NC pin 4 NC pin 1/3 Quartz crystal max. 0,90 100% leadfree, RoHS - compliant 1,2 1 2,5 3,5 1 Recommended Solder Pad: All dimensions in mm typical DESCRIPTION: This quartz Crystal in SMD ceramic package has been specially designed with Micro Crystal photolitographic process for surface mount using infrared, vapor phase or epoxy technics APPLICATIONS: - Downhole and Well drilling equipments -Avionics - Airborne equipments - Geothermal equipment The crystals are supplied in trays (208 crystals per tray). For pick-and-place equipment, the parts are available in 12mm tapes: 7” with 1’000 crystals 7” with 3’000 crystals Frequency Range FL 16–40 MHz Load capacitance 1) CL 20.0 pF Frequency tolerance at 25°C 2) ΔF/F +/-50 ppm Frequency versus temperature TD: –55 to +175°C TG: –55 to +200°C 3) ΔF/F0 +/-150 +/-250 ppm Drive level typ/max P 100 / 200 µW Insulation resistance min. Ri 500 MΩ ΔF/F +/-3 ppm Aging first year max. 1) Other load capacitances on request. 2) Tighter and wider frequency tolerances on request. 3) Tighter thermal stability on request. Rs[Ω] typ / max C1 [fF] typ / max Co [pF] typ 16 to < 20 80 / 200 2/4 1.5 20 to < 24 60 / 120 3/5 2 24 to ≤ 40 50 / 100 4/6 3 Frequency [MHz] STANDARD FREQUENCIES: Frequency MHz 16.0000 16.3840 18.432 20.0000 24.0000 Other frequencies from 16 MHz up to 40 MHz on request ENVIRONMENTAL CHARACTERISTICS: Conditions Storage temp. range –55 to +125°C TD Operating temperature range –55 to +175°C TG Operating temperature range –55 to +200°C Shock resistance 10000 g, 0.3 ms, ½ sine Vibration resistance TERMINATIONS AND PROCESSING: PRODUCT DESCRIPTION AND ORDERING INFORMATION: 40 g / 10–2000 Hz Type Termination Processing CC6A-T1AH For SMD mounting Au plated pads Reflow soldering +260°C / 20 s max. Only avaible with TD temperature range CC6A-T3AH For SMD mounting Sn/Ag/Cu plated Reflow soldering +260°C / 20 s max. CC6A–T1AH 24.0 MHz 20.0pF +/-50ppm TD QI Frequency FL CL Load Capacitance 16.0 pF 20.0 pF Frequency tolerance +/- 50 ppm +/- 100 ppm Temperature Range TD = - 55 to +175°C TG = - 55 to +200°C Optional: if not defined, ‚Standard‘ will apply Qualification QI = Industrial (Standard) QS = Custom Specification A unique part number will be generated for each product specification, i.e: 20xxxx-MG01 1'000 pcs (in 12mm tape on 7" reel) 20xxxx-MG02 2'000 pcs (in 12mm tape on 7" reel) 20xxxx-EA00 xxx pcs (in ESD plastic tray) Please contact us. All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 1.0/02.2015