Simplifying System IntegrationTM
73M1866B/73M1966B
Infineon TAPI High-Level Driver
User Guide
July, 2010
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
© 2010 Teridian Semiconductor Corporation. All rights reserved.
Teridian Semiconductor Corporation is a registered trademark of Teridian Semiconductor Corporation.
Simplifying System Integration is a trademark of Teridian Semiconductor Corporation.
Linux is a registered trademark of Linus Torvalds.
Asterisk is a registered trademark of Digium, Inc.
All other trademarks are the property of their respective owners.
Teridian Semiconductor Corporation makes no warranty for the use of its products, other than expressly
contained in the Company’s warranty detailed in the Teridian Semiconductor Corporation standard Terms
and Conditions. The company assumes no responsibility for any errors which may appear in this
document, reserves the right to change devices or specifications detailed herein at any time without
notice and does not make any commitment to update the information contained herein. Accordingly, the
reader is cautioned to verify that this document is current by comparing it to the latest version on
http://www.teridian.com or by checking with your sales representative.
Teridian Semiconductor Corp., 6440 Oak Canyon, Suite 100, Irvine, CA 92618
TEL (714) 508-8800, FAX (714) 508-8877, http://www.teridian.com
2
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
Table of Contents
1
2
3
4
Introduction ................................................................................................................................... 5
1.1 Purpose and Scope ................................................................................................................. 5
1.2 Conventions Used in this Guide ............................................................................................... 6
1.3 Acronyms................................................................................................................................. 6
Driver Service Interface ................................................................................................................. 7
2.1 Linux Operating System ........................................................................................................... 7
2.2 Other Operating Systems ......................................................................................................... 7
IFX TAPI IOCTL Commands Description ...................................................................................... 8
3.1 IFX_TAPI_CH_INIT ................................................................................................................. 9
3.2 IFX_TAPI_PCM_IF_CFG_SET .............................................................................................. 10
3.3 IFX_TAPI_PCM_CFG_SET ................................................................................................... 11
3.4 IFX_TAPI_PCM_CFG_GET ................................................................................................... 11
3.5 IFX_TAPI_PCM_ACTIVATION_SET ...................................................................................... 12
3.6 IFX_TAPI_PCM_ACTIVATION_GET ..................................................................................... 13
3.7 IFX_TAPI_EVENT_ENABLE .................................................................................................. 14
3.8 IFX_TAPI_EVENT_DISABLE ................................................................................................. 14
3.9 IFX_TAPI_EVENT_GET ........................................................................................................ 15
3.10 IFX_TAPI_VERSION_GET .................................................................................................... 15
3.11 IFX_TAPI_DEBUG_REPORT_SET........................................................................................ 16
3.12 IFX_TAPI_LINE_TYPE_SET.................................................................................................. 17
3.13 IFX_TAPI_PHONE_VOLUME_SET ....................................................................................... 18
3.14 IFX_TAPI_FXO_HOOK_SET ................................................................................................. 18
3.15 IFX_TAPI_FXO_FLASH_SET ................................................................................................ 19
3.16 IFX_TAPI_FXO_FLASH_CFG_SET ....................................................................................... 19
3.17 IFX_TAPI_FXO_BAT_ GET ................................................................................................... 20
3.18 IFX_TAPI_FXO_APOH_ GET ................................................................................................ 21
3.19 IFX_TAPI_FXO_RING_ GET ................................................................................................. 22
3.20 IFX_TAPI_FXO_POLARITY_ GET......................................................................................... 23
3.21 IFX_TAPI_LASTERR ............................................................................................................. 24
3.22 IFX_TAPI_FXO_LINE_MODE_SET ....................................................................................... 25
5
Type and Structure Definitions ................................................................................................... 26
4.1 IFX_TAPI_CH_INIT_t............................................................................................................. 26
4.2 IFX_TAPI_PCM_IF_CFG_t .................................................................................................... 27
4.3 IFX_TAPI_PCM_ CFG_t ........................................................................................................ 28
4.4 IFX_TAPI_EVENT_t .............................................................................................................. 28
4.5 IFX_TAPI_LINE_TYPE_CFG_t .............................................................................................. 29
4.6 IFX_TAPI_FXO_LINE_MODES_t........................................................................................... 29
4.7 IFX_TAPI_LINE_VOLUME_t .................................................................................................. 30
4.8 IFX_TAPI_FXO_HOOK_t ....................................................................................................... 30
4.9 IFX_TAPI_FXO_FLASH_CFG_t............................................................................................. 30
4.10 IFX_TAPI_EVENT_ID_t ......................................................................................................... 31
4.11 M1966_DEBUG_TRACE_MASK............................................................................................ 31
4.12 M1966_CNTRY_CODE_XX ................................................................................................... 32
Related Documentation ............................................................................................................... 34
6
Contact Information..................................................................................................................... 34
Revision History .................................................................................................................................. 35
Rev. 2.2
3
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
Figures
Figure 1: Driver Architecture .................................................................................................................... 5
Tables
Table 1: Summary of IFX TAPI IOCTLs ................................................................................................... 8
Table 2: Summary of Types and Structure Definitions ............................................................................ 26
4
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
1 Introduction
This document describes the functionalities of the 73M1866B/73M1966B TAPI Driver. This driver
software is provided as part of the Infineon BSP package for Danube, Vinax and AR9 platforms. Its
design and implementation is tightly integrated with Infineon TAPI architecture, therefore, its sole purpose
is to be used in Infineon TAPI environment. In addition to this TAPI driver, the Teredian
73M1866B/73M1966B Reference Driver is also required as for interface to the 73M1x66 chip set.
The 73M1x66B TAPI driver is built as a loadable module. It will be brought into operation by a user
application or by an operating system startup script. For Linux, the “insmod” command is used to insert
the driver into the kernel. The “insmod” command invokes the module_init() macro, which in turn runs the
one-time initialization function of the driver.
1.1
Purpose and Scope
IFX TAPI is the API layer used by Infineon. This version of the Teridian TAPI driver is compliant to IFX
TAPI Version 3.8.3. This specification is available from Infineon.
The 73M1x66B TAPI Driver provides the necessary system interfaces for the control and management of
the 73M1x66B. The driver supports ioctl calls from the application and translates these to and from the
device via the Reference Driver layer.
The scope of this document will includes only the TAPI driver’s user interface. Detail of internal driver
architecture can be found in the 73M1x66B Reference Driver User Guide document.
Figure 1 illustrates the basic architecture model for the driver. The model is intended to be independent
of processor and operating system. Layers above the reference driver address software interfaces which
may pre-exist for a given application (e.g. Asterisk®) and the layer below addresses hardware related
interfaces between the processor and the 73M1x66B devices.
Application
FXOCTL
(Command Line Interface)
TAPI IOCTL
TAPI Driver
TSC IOCTL
TSC IOCTL
Teridian 73M1x66B Reference Driver
Figure 1: Driver Architecture
Rev. 2.2
5
73M1866B/73M1966B TAPI High-Level Driver User Guide
1.2
UG_1x66B_021
Conventions Used in this Guide
This document uses the following conventions:
•
•
1.3
Software code, IOCTL names and data types are presented in Courier font.
A table with a blue header is a summary table. A table with a gray header is a detail table.
Acronyms
APOH – Another Phone Off Hook
BSP – Board Support Package
DAA – Data Access Arrangement
FXO – Foreign eXchange Office
IOCTL – I/O Control
NOPOH – No Phone Off Hook
POH – Phone Off Hook
6
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
2 Driver Service Interface
The Driver Service provides the link between the FXO device and the user application. First, the driver
must be loaded and bonded into the operating system environment before this service can be provided.
Access to the driver is done via two file descriptors – the device and channel file descriptors. The device
file descriptor provides access to device level management interface while the channel descriptor is used
to manage at the channel level interface. The driver supports multiple FXO channels through separated
channel descriptors; however, only one device descriptor is used.
The following sections describe how the driver is brought into action based on the operating system
environment.
2.1
Linux Operating System
This description is valid for Linux 2.4 and 2.6. The 73M1x66B driver takes the form of a Linux standard
character device driver. It is brought into operation by a user application or by Linux startup script using
insmod command. This command inserts the driver module into the kernel which in turn registers with
the kernel using the default major number of 221. Multiple FXO channels are supported via the use of
minor number which can varies from 0 to 16. This minor number associated with the device and channel
descriptors created using mknod command. The driver expects the minor number 0 to be associated with
the device descriptor and the number from 1 to 16 with the channel descriptors. Device major and minor
numbers are configurable at build time as described in the Reference Driver document.
The device and channel descriptors must be created in the “/dev” directory at the same time when the
driver is insmod into the kernel. The mknod command is used to create those descriptors as illustrated
below:
mknod -m 660 /dev/ter10
mknod -m 660 /dev/ter11
c 221 0
c 221 1
In this example above one device descriptor (ter10) is created with major number 221, minor number 0,
and one channel descriptor (ter11) is created with major number 221, minor number 1.
Once the driver is installed and the device/channel descriptors are created, the driver service can be
accessed via standard C library open(), close(), and ioctl() functions.
The following illustrates how the device and channel are opened, closed, and the ioctl access:
devfd = open("/dev/ter10",O_RDONLY|O_WRONLY);
chanfd = open(“/dev/ter11”,O_RDONLY|O_WRONLY);
ioctl (devfd, M1966_EVENT_GET, &event_structure);
ioctl (chanfd, M1966_ATH1, NULL);
close (devfd);
close (chanfd);
Accessing the driver using ioctl must be done via an opened descriptor. There are two types of ioctl
command – the device level commands which can be accessed by an opened device descriptor and
channel level commands, which can be accessed using an opened channel descriptor. Section 3
describes the ioctl command.
2.2
Other Operating Systems
To be provided.
Rev. 2.2
7
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
3 IFX TAPI IOCTL Commands Description
Once the driver is successfully opened the application can control the operation of the device and the
FXO channel. The application in user space communicates with the driver via standard Linux driver
interface IOCTL calls. The following sections describe the detail of each IOCTL command.
Some commands pertain to device level configuration such as PCM interface parameters; these must be
called using device descriptor, while others are channel level commands and must be called using
specific channel descriptor, if more than one channel is active. Table 1 provides a summary of the
IOCTLs.
Table 1: Summary of IFX TAPI IOCTLs
IOCTL Name
Description
Descriptor
IFX_TAPI_CH_INIT
Initializing FXO channel for operation.
Channel
IFX_TAPI_PCM_IF_CFG_SET
Set PCM interface configuration.
Device
IFX_TAPI_PCM_CFG_SET
Set PCM configuration.
Channel
IFX_TAPI_PCM_CFG_GET
Retrieve PCM configuration.
Channel
IFX_TAPI_PCM_ACTIVATION_SET
Activate/Deactivate PCM channel.
Channel
IFX_TAPI_PCM_ACTIVATION_GET
Retrieve PCM activation state.
Channel
IFX_TAPI_EVENT_ENABLE
Enable FXO event detection.
Channel
IFX_TAPI_EVENT_DISABLE
Disable FXO event detection.
Channel
IFX_TAPI_EVENT_GET
Retrieve FXO event.
Device
IFX_TAPI_VERSION_GET
Retrieve driver version number.
Device
IFX_TAPI_DEBUG_REPORT_SET
Set driver debug message trace mask.
Device
IFX_TAPI_LINE_TYPE_SET
Set line type – must be FXO only.
Channel
IFX_TAPI_PHONE_VOLUME_SET
Set speaker phone/micro phone volume.
Channel
IFX_TAPI_FXO_HOOK_SET
Issue on/off hook.
Channel
IFX_TAPI_FXO_FLASH_SET
Issue flash hook.
Channel
IFX_TAPI_FXO_FLASH_CFG_SET
Configure FXO hook flash parameter.
Channel
IFX_TAPI_FXO_BAT_ GET
Retrieve battery status.
Channel
IFX_TAPI_FXO_APOH_ GET
Retrieve APOH status.
Channel
IFX_TAPI_FXO_RING_ GET
Retrieve ring status.
Channel
IFX_TAPI_FXO_POLARITY_ GET
Retrieve line polarity status.
Channel
IFX_TAPI_LASTERR
Retrieve driver last error code.
Device
IFX_TAPI_FXO_LINE_MODE_SET
Enable/Disable FXO channel.
Channel
8
Rev. 2.2
UG_1x66B_021
3.1
73M1866B/73M1966B TAPI High-Level Driver User Guide
IFX_TAPI_CH_INIT
Description
Perform all 73M1x66 channel initialization. This includes initialize all default registers and country specific
threshold parameters.
#define
IFX_TAPI_CH_INIT
_IO(IFX_TAPI_IOC_MAGIC, 0x0F)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_CH_INIT,
unsigned long param );
Parameters
Data Type
int
Name
chan_fd
Description
int
IFX_TAPI_CH_INIT
I/O control identifier for this operation.
unsigned long
param
The parameter points to a IFX_TAPI_CH_INIT_t
structure.
Channel descriptor.
Return Values
Data Type
Description
int
IFX_ERROR – Failed perform channel initialization.
IFX_SUCCESS – Successful.
Rev. 2.2
9
73M1866B/73M1966B TAPI High-Level Driver User Guide
3.2
UG_1x66B_021
IFX_TAPI_PCM_IF_CFG_SET
Description
This ioctl configures the PCM interface.
#define
IFX_TAPI_PCM_IF_CFG_SET
_IO(IFX_TAPI_IOC_MAGIC, 0x11)
Prototype
int ioctl (
int dev_fd,
int IFX_TAPI_PCM_IF_CFG_SET,
unsigned long param );
Parameters
Data Type
Name
Description
int
dev_fd
Device descriptor.
int
IFX_TAPI_PCM_IF_CFG_SET
I/O control identifier for this operation.
unsigned long
param
The parameter points to a
IFX_TAPI_PCM_IF_CFG_SET_t
structure.
Return Values
Data Type
int
10
Description
IFX_ERROR – Failed to configure PCM interface.
IFX_SUCCESS – Successful.
Rev. 2.2
UG_1x66B_021
3.3
73M1866B/73M1966B TAPI High-Level Driver User Guide
IFX_TAPI_PCM_CFG_SET
Description
This ioctl configure the time slot for the PCM channel.
#define
IFX_TAPI_PCM_CFG_SET
_IO(IFX_TAPI_IOC_MAGIC, 0x04)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_PCM_CFG_SET,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_PCM_CFG_SET
I/O control identifier for this operation.
unsigned long
param
The parameter points to a
IFX_TAPI_PCM_CFG_t structure.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to configure PCM channel.
IFX_SUCCESS – Successful.
3.4
IFX_TAPI_PCM_CFG_GET
Description
This ioctl retrieves the current time slot configuration for the PCM channel.
#define
IFX_TAPI_PCM_CFG_GET
_IO(IFX_TAPI_IOC_MAGIC, 0x05)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_PCM_CFG_GET,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_PCM_CFG_GET
unsigned long
param
I/O control identifier for this operation.
The parameter points to a
IFX_TAPI_PCM_CFG_t structure.
Return Values
Data Type
int
Rev. 2.2
Description
IFX_ERROR – Failed to retrieve PCM config.
IFX_SUCCESS – Successful.
11
73M1866B/73M1966B TAPI High-Level Driver User Guide
3.5
UG_1x66B_021
IFX_TAPI_PCM_ACTIVATION_SET
Description
This service activates / deactivates the PCM time slots configured for this channel.
#define
IFX_TAPI_PCM_ACTIVATION_SET
_IO(IFX_TAPI_IOC_MAGIC, 0x06)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_PCM_ACTIVATION_SET,
unsigned long param );
Parameters
Data Type
int
Name
chan_fd
Description
int
IFX_TAPI_PCM_ACTIVATION_SET
I/O control identifier for this operation.
unsigned long
param
The parameter defines the activation
status: 0 deactivate the time slot, 1
activate the time slot.
Channel descriptor.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to perform PCM activation set.
IFX_SUCCESS – Successful.
12
Rev. 2.2
UG_1x66B_021
3.6
73M1866B/73M1966B TAPI High-Level Driver User Guide
IFX_TAPI_PCM_ACTIVATION_GET
Description
This service gets the activation status of the PCM time slots configured for this channel.
#define
IFX_TAPI_PCM_ACTIVATION_GET
_IO(IFX_TAPI_IOC_MAGIC, 0x07)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_PCM_ACTIVATION_GET,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_PCM_ACTIVATION_GET
I/O control identifier for this operation.
unsigned long
param
The parameter points to an integer
which returns the status 0: The time slot
is deactivate, or 1: The time slot is
active.
Return Values
Data Type
int
Rev. 2.2
Description
IFX_ERROR – Failed to retrieve PCM channel activation status.
IFX_SUCCESS – Successful.
13
73M1866B/73M1966B TAPI High-Level Driver User Guide
3.7
UG_1x66B_021
IFX_TAPI_EVENT_ENABLE
Description
Enable detection of FXO events.
#define IFX_TAPI_EVENT_ENABLE
_IO(IFX_TAPI_IOC_MAGIC, 0xC1)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_EVENT_ENABLE,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_EVENT_ENABLE
I/O control identifier for this operation.
unsigned long
param
N/A.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to enable event detection.
IFX_SUCCESS – Successful.
3.8
IFX_TAPI_EVENT_DISABLE
Description
Disable detection of FXO events.
#define IFX_TAPI_EVENT_DISABLE
_IO(IFX_TAPI_IOC_MAGIC, 0xC2)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_EVENT_DISABLE,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_EVENT_DISABLE
I/O control identifier for this operation.
unsigned long
param
N/A.
Return Values
Data Type
int
14
Description
IFX_ERROR – Failed to disable event detection.
IFX_SUCCESS – Successful.
Rev. 2.2
UG_1x66B_021
3.9
73M1866B/73M1966B TAPI High-Level Driver User Guide
IFX_TAPI_EVENT_GET
Description
Read FXO event from the driver.
#define IFX_TAPI_EVENT_GET
_IO(IFX_TAPI_IOC_MAGIC, 0xC0)
Prototype
int ioctl (
int dev_fd,
int IFX_TAPI_EVENT_GET,
unsigned long param );
Parameters
Data Type
int
Name
dev_fd
Description
int
IFX_TAPI_EVENT_GET
I/O control identifier for this operation.
unsigned long
param
Pointer to an IFX_TAPI_EVENT_t
structure.
Device descriptor.
Return Values
Data Type
int
Description
IFX_ERROR – Failed to read event.
IFX_SUCCESS – Successful.
3.10 IFX_TAPI_VERSION_GET
Description
Retrieves the TAPI Driver version string.
#define
IFX_TAPI_VERSION_GET
_IO(IFX_TAPI_IOC_MAGIC, 0x00)
Prototype
int ioctl (
int dev_fd,
int IFX_TAPI_VERSION_GET,
unsigned long param );
Parameters
Data Type
Name
Description
int
dev_fd
Device descriptor.
int
IFX_TAPI_EVENT_GET
I/O control identifier for this operation.
unsigned long
param
Pointer to version character string.
Return Values
Data Type
int
Rev. 2.2
Description
IFX_ERROR – Failed to get TAPI version.
IFX_SUCCESS – Successful.
15
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
3.11 IFX_TAPI_DEBUG_REPORT_SET
Description
Set the driver trace mask to enable or disable run-time trace messages. Multiple trace masks can
#define
IFX_TAPI_DEBUG_REPORT_SET
_IO(IFX_TAPI_IOC_MAGIC, 0x12)
Prototype
int ioctl (
int dev_fd,
int IFX_TAPI_DEBUG_REPORT_SET,
unsigned long param );
Parameters
Data Type
Name
Description
int
dev_fd
Device descriptor.
int
IFX_TAPI_DEBUG_REPORT_SET
unsigned long
param
I/O control identifier for this operation.
Debug trace mask:
M1966_DEBUG_TRACE_MASK.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to set debug report.
IFX_SUCCESS – Successful.
16
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
3.12 IFX_TAPI_LINE_TYPE_SET
Description
This service configures the line type. Please note that this command only accept FXO line type
(IFX_TAPI_LINE_TYPE_FXO).
#define
IFX_TAPI_LINE_TYPE_SET
_IOW(IFX_TAPI_IOC_MAGIC, 0x47, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_LINE_TYPE_SET,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_LINE_TYPE_SET
I/O control identifier for this operation.
unsigned long
param
The parameter is a pointer to an
IFX_TAPI_LINE_TYPE_CFG_t struct.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to set line type.
IFX_SUCCESS – Successful.
Rev. 2.2
17
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
3.13 IFX_TAPI_PHONE_VOLUME_SET
Description
Sets the speaker phone and microphone volume settings.
#define
IFX_TAPI_PHONE_VOLUME_SET
_IOW(IFX_TAPI_IOC_MAGIC, 0x42, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_PHONE_VOLUME_SET,
unsigned long param );
Parameters
Data Type
int
Name
chan_fd
Description
int
IFX_TAPI_PHONE_VOLUME_SET
I/O control identifier for this operation.
unsigned long
param
The parameter points to an
IFX_TAPI_LINE_VOLUME_t structure.
Channel descriptor.
Return Values
Data Type
int
Description
IFX_ERROR – Failed to set volume.
IFX_SUCCESS – Successful.
3.14 IFX_TAPI_FXO_HOOK_SET
Description
Issues on-/off-hook in the fxo interface.
#define IFX_TAPI_FXO_HOOK_SET
_IOW(IFX_TAPI_IOC_MAGIC, 0xDB, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_FXO_HOOK_SET,
unsigned long param );
Parameters
Data Type
int
Name
chan_fd
Description
int
IFX_TAPI_FXO_HOOK_SET
I/O control identifier for this operation.
unsigned long
param
Hook requested.
Channel descriptor.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to perform hook switch.
IFX_SUCEESS – Successful.
18
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
3.15 IFX_TAPI_FXO_FLASH_SET
Description
Issues flash-hook in the FXO interface.
#define IFX_TAPI_FXO_FLASH_SET
_IOW(IFX_TAPI_IOC_MAGIC, 0xDC, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_FXO_FLASH_SET,
unsigned long param );
Parameters
Data Type
int
Name
chan_fd
Description
int
IFX_TAPI_FXO_FLASH_SET
I/O control identifier for this operation.
unsigned long
param
Parameter is not required.
Channel descriptor.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to perform hook flash.
IFX_SUCCESS – Successful.
3.16 IFX_TAPI_FXO_FLASH_CFG_SET
Description
Configuration of the fxo hook.
#define IFX_TAPI_FXO_FLASH_CFG_SET
_IOW(IFX_TAPI_IOC_MAGIC, 0xD7, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_FXO_FLASH_CFG_SET,
unsigned long param );
Parameters
Data Type
int
Name
chan_fd
Description
int
IFX_TAPI_FXO_FLASH_CFG_SET
I/O control identifier for this operation.
unsigned long
param
Points to an
IFX_TAPI_FXO_FLASH_CFG_t
structure.
Channel descriptor.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to set hook flash config.
IFX_SUCCESS – Successful.
Rev. 2.2
19
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
3.17 IFX_TAPI_FXO_BAT_ GET
Description
Receives battery status from the FXO interface.
#define IFX_TAPI_FXO_BAT_GET
_IOW(IFX_TAPI_IOC_MAGIC, 0xDD, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_FXO_BAT_GET,
unsigned long param );
Parameters
Data Type
int
Name
chan_fd
Description
int
IFX_TAPI_FXO_BAT_GET
I/O control identifier for this operation.
unsigned long
param
Points to IFX_boolean_t type,
indicating the battery status
• IFX_TRUE if the FXO port is
disconnected from the PSTN (battery
absent).
• IFX_FALSE if the FXO port is
connected to the PSTN (battery
present).
Channel descriptor.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to read battery status.
IFX_SUCCESS – Successful.
20
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
3.18 IFX_TAPI_FXO_APOH_ GET
Description
Retrieves APOH (another phone off-hook) status of the fxo interface.
#define IFX_TAPI_FXO_APOH_GET
_IOW(IFX_TAPI_IOC_MAGIC, 0xDF, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_FXO_APOH_GET,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_FXO_APOH_GET
I/O control identifier for this operation.
unsigned long
param
Points to IFX_boolean_t type,
indicating APOH status.
• IFX_TRUE if APOH condition is verified.
• IFX_FALSE otherwise.
Return Values
Data Type
int
Rev. 2.2
Description
IFX_ERROR – Failed to read APOH status.
IFX_SUCCESS – Successful.
21
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
3.19 IFX_TAPI_FXO_RING_ GET
Description
Receives ring status from the FXO interface.
#define IFX_TAPI_FXO_RING_GET
_IOW(IFX_TAPI_IOC_MAGIC, 0xE0, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_FXO_RING_GET,
unsigned long param );
Parameters
Data Type
int
Name
chan_fd
Description
int
IFX_TAPI_FXO_RING_GET
I/O control identifier for this operation.
unsigned long
param
Points to IFX_boolean_t type,indicating
the ringing status of the FXO line.
• IFX_TRUE the line is ringing.
• IFX_FALSE the line is not ringing.
Channel descriptor.
Return Values
Data Type
int
22
Description
IFX_ERROR – Failed to read ring status.
IFX_SUCCESS – Successful.
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
3.20 IFX_TAPI_FXO_POLARITY_ GET
Description
Receives line polarity status from the FXO interface.
#define IFX_TAPI_FXO_POLARITY_GET
_IOW(IFX_TAPI_IOC_MAGIC, 0xE1, int)
Prototype
int ioctl (
int chan_fd,
int IFX_TAPI_FXO_POLARITY_GET,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_FXO_POLARITY_GET
I/O control identifier for this operation.
unsigned long
param
Points to IFX_boolean_t type,
• IFX_TRUE reflects normal polarity,
• IFX_FALSE reflects reversed polarity
Return Values
Data Type
int
Rev. 2.2
Description
IFX_ERROR – Failed to read polarity status.
IFX_SUCCESS – Successful.
23
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
3.21 IFX_TAPI_LASTERR
Description
This service returns the last error code occurred in the TAPI driver or the low level driver.
#define
IFX_TAPI_LASTERR
_IOW(IFX_TAPI_IOC_MAGIC, 0x48, int)
Prototype
int ioctl (
int dev_fd,
int IFX_TAPI_LASTERR,
unsigned long param );
Parameters
Data Type
int
Name
dev_fd
Description
int
IFX_TAPI_LASTERR
I/O control identifier for this operation.
unsigned long
param
The parameter points to a
IFX_TAPI_ErrorLine_t structure.
Device descriptor.
Return Values
Data Type
int
24
Description
IFX_ERROR – Failed to read last error code.
IFX_SUCCESS – Successful.
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
3.22 IFX_TAPI_FXO_LINE_MODE_SET
Description
This service is used to manage (enable/disable) the FXO channel. When disabled, the FXO channel is
inoperative and it does not monitor the physical line for channel events, nor will it detect any incoming ring
signal. However, it can be put back in operation using this ioctl with the “enable” parameter.
#define
IFX_TAPI_FXO_LINE_MODE_SET
_IOW(IFX_TAPI_IOC_MAGIC, 0xE4, int)
Prototype
int ioctl (
int dev_fd,
int IFX_TAPI_FXO_LINE_MODE_SET,
unsigned long param );
Parameters
Data Type
Name
Description
int
chan_fd
Channel descriptor.
int
IFX_TAPI_FXO_LINE_MODE_SET
I/O control identifier for this operation.
unsigned long
param
The parameter points to a
IFX_TAPI_FXO_LINE_MODES_t structure.
Return Values
Data Type
Description
int
IFX_ERROR – Failed to set line mode.
IFX_SUCCESS – Successful.
Rev. 2.2
25
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
4 Type and Structure Definitions
This section describes the type definitions, data types and structures used in the 73M1x66B TAPI driver.
Table 2: Summary of Types and Structure Definitions
Structure/Type Name
IFX_TAPI_CH_INIT_t
Description
IFX_TAPI_PCM_IF_CFG_t
PCM interface configuration structure used by
IFX_TAPI_PCM_IF_CFG_SET.
IFX_TAPI_PCM_ CFG_t
Structure for PCM channel configuration.
IFX_TAPI_EVENT_t
Structure reported by an IFX_TAPI_EVENT_GET ioctl.
IFX_TAPI_LINE_TYPE_CFG_t
Line type configuration used by IFX_TAPI_LINE_TYPE_SET.
TAPI initialization structure used by IFX_TAPI_CH_INIT.
IFX_TAPI_FXO_LINE_MODES_t Enumerates possible FXO channel management commands used
by the IFX_TAPI_LINE_TYPE_SET ioctl.
IFX_TAPI_LINE_VOLUME_t
Configures phone volume settings.
IFX_TAPI_FXO_HOOK_t
Defines the possible hook status for FXO, used in
IFX_TAPI_FXO_HOOK_SET.
IFX_TAPI_FXO_FLASH_CFG_t
FXO hook configuration, used in IFX_TAPI_FXO_FLASH_CFG_SET.
IFX_TAPI_EVENT_ID_t
List of event IDs.
M1966_DEBUG_TRACE_MASK
Trace macros used by ioctl IFX_TAPI_DEBUG_REPORT_SET.
M1966_CNTRY_CODE_XX
Country code macros used by ioctl IFX_TAPI_CH_INIT.
4.1
IFX_TAPI_CH_INIT_t
Description
TAPI initialization structure used by IFX_TAPI_CH_INIT.
Prototype
typedef struct
{
unsigned char nMode;
unsigned char nCountry;
void * pProc;
} IFX_TAPI_CH_INIT_t;
Parameters
Data Type
Unsigned char
Name
nMode
Description
Unsigned char
nCountry
Country code as defined in
M1966_CNTRY_CODE_XX.
Void *
pProc
For details, see the 73M1866/73M1966
Reference Driver User Guide.
26
N/A.
Rev. 2.2
UG_1x66B_021
4.2
73M1866B/73M1966B TAPI High-Level Driver User Guide
IFX_TAPI_PCM_IF_CFG_t
Description
Structure for PCM interface configuration used by IFX_TAPI_PCM_IF_CFG_SET.
Prototype
typedef struct
{
IFX_TAPI_PCM_IF_MODE_t nOpMode;
IFX_TAPI_PCM_IF_DCLFREQ_t nDCLFreq;
IFX_operation_t nDoubleClk;
IFX_TAPI_PCM_IF_SLOPE_t nSlopeTX;
IFX_TAPI_PCM_IF_SLOPE_t nSlopeRX;
IFX_TAPI_PCM_IF_OFFSET_t nOffsetTX;
IFX_TAPI_PCM_IF_OFFSET_t nOffsetRX;
IFX_TAPI_PCM_IF_DRIVE_t nDrive;
IFX_operation_t nShift;
IFX_uint8_t nMCTS;
} IFX_TAPI_PCM_IF_CFG_t;
Parameters
Data Type
IFX_TAPI_PCM_IF_MODE_t
Name
nOpMode
Description
IFX_TAPI_PCM_IF_DCLFREQ_t
nDCLFreq
DCL frequency to be used in master and/or slave
mode.
IFX_operation_t
nDoubleClk
Activation/deactivation of the double clock mode.
•IFX_DISABLE: single clocking is used.
•IFX_ENABLE: double clocking is used.
IFX_TAPI_PCM_IF_SLOPE_t
nSlopeTX
Slope to be considered for the PCM transmit
direction.
IFX_TAPI_PCM_IF_SLOPE_t
nSlopeRX
Slope to be considered for the PCM receive
direction.
IFX_TAPI_PCM_IF_OFFSET_t
nOffsetTX
Transmit bit offset.
IFX_TAPI_PCM_IF_OFFSET_t
nOffsetRX
Receive bit offset.
IFX_TAPI_PCM_IF_DRIVE_t
nDrive
Drive mode for bit 0.
IFX_operation_t
nShift
Enable/disable shift access edge.
Shift the access edges by one clock cycle.
• IFX_DISABLE: no shift takes place.
• IFX_ENABLE: shift takes place. Note: This
setting is defined only in double clock mode.
IFX_uint8_t
nMCTS
Reserved.PCM chip specific settings.
Set this field to 0x00 if not advised otherwise by
the IFX support team.
Rev. 2.2
PCM interface mode (master or slave mode).
27
73M1866B/73M1966B TAPI High-Level Driver User Guide
4.3
UG_1x66B_021
IFX_TAPI_PCM_ CFG_t
Description
Structure for PCM channel configuration.
Prototype
typedef struct
{
unsigned long nTimeslotRX;
unsigned long nTimeslotTX;
unsigned long nHighway;
unsigned long nResolution;
} IFX_TAPI_PCM_CFG_t;
Parameters
Data Type
Name
Description
unsigned long
nTimeslotRX
PCM timeslot for the receive direction.
unsigned long
nTimeslotTX
PCM timeslot for the transmit direction.
unsigned long
nHighway
Defines the PCM highway number which is
connected to the channel.
unsigned long
nResolution
Defines the PCM interface coding, values defined
in IFX_TAPI_PCM_RES_t.
4.4
IFX_TAPI_EVENT_t
Description
This structure is reported by an IFX_TAPI_EVENT_GET ioctl.
Prototype
typedef struct
{
IFX_TAPI_EVENT_ID_t id;
IFX_uint16_t ch;
IFX_uint16_t more;
IFX_TAPI_EVENT_DATA_t data;
} IFX_TAPI_EVENT_t;
Parameters
Data Type
Name
Description
IFX_TAPI_EVENT_ID_t
id
Event type and sub-type.
IFX_uint16_t
ch
FXO channel number.
IFX_uint16_t
more
This field is used to report whether new events are
ready (IFX_TRUE ) or not (IFX_FALSE ).
IFX_TAPI_EVENT_DATA_t
data
N/A
28
Rev. 2.2
UG_1x66B_021
4.5
73M1866B/73M1966B TAPI High-Level Driver User Guide
IFX_TAPI_LINE_TYPE_CFG_t
Description
Line type configuration used by ioctl IFX_TAPI_LINE_TYPE_SET.
Prototype
typedef struct
{
IFX_TAPI_LINE_TYPE_t lineType;
IFX_uint8_t nDaaCh;
} IFX_TAPI_LINE_TYPE_CFG_t;
Data Type
Name
Description
IFX_TAPI_LINE_TYPE_t
lineType
Must be IFX_TAPI_LINE_TYPE_FXO.
IFX_uint8_t
nDaaCh
N/A
4.6
IFX_TAPI_FXO_LINE_MODES_t
Description
This data type enumerates possible FXO channel management commands used by the
IFX_TAPI_LINE_TYPE_SET ioctl.
Prototype
/** Defines the possible line modes for fxo, used in
IFX_TAPI_FXO_LINE_MODES_t */
typedef enum
{
/** Disabled. */
IFX_TAPI_FXO_LINE_MODE_DISABLED = 0,
/** Active. */
IFX_TAPI_FXO_LINE_MODE_ACTIVE = 1
} IFX_TAPI_FXO_LINE_MODES_t;
Data Type
Name
Description
IFX_TAPI_FXO_LINE_MODE_DISABLED
0
Disable FXO channel.
IFX_TAPI_FXO_LINE_MODE_ACTIVE
1
Enable FXO channel.
Rev. 2.2
29
73M1866B/73M1966B TAPI High-Level Driver User Guide
4.7
UG_1x66B_021
IFX_TAPI_LINE_VOLUME_t
Description
Structure used to configure phone volume settings.
Prototype
typedef struct
{
int nGainRx;
int nGainTx;
} IFX_TAPI_LINE_VOLUME_t;
Data Type
Name
Description
int
nGainRx
Volume setting for the receiving path.
int
nGainTx
Volume setting for the transmitting path.
4.8
IFX_TAPI_FXO_HOOK_t
Description
Defines the possible hook status for fxo, used in IFX_TAPI_FXO_HOOK_SET.
Prototype
typedef enum
{
IFX_TAPI_FXO_HOOK_ONHOOK = 0,
IFX_TAPI_FXO_HOOK_OFFHOOK = 1
} IFX_TAPI_FXO_HOOK_t;
Data Type
Name
Description
IFX_TAPI_FXO_HOOK_ONHOOK
0
On-hook.
IFX_TAPI_FXO_HOOK_OFFHOOK
1
Off-hook.
4.9
IFX_TAPI_FXO_FLASH_CFG_t
Description
Hook configuration for FXO, used in IFX_TAPI_FXO_FLASH_CFG_SET.
Prototype
typedef struct
{
IFX_uint32_t nFlashTime;
} IFX_TAPI_FXO_FLASH_CFG_t;
Data Type
Name
Description
IFX_uint32_t
nFlashTime
Duration of a flash-hook.
Default 100 ms.
30
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
4.10 IFX_TAPI_EVENT_ID_t
Description
List of event IDs. These are the #define macros of the FXO event identification.
Prototype
typedef enum
{
I
IFX_TAPI_EVENT_NONE
=
IFX_TAPI_EVENT_FXO_BAT_FEEDED =
IFX_TAPI_EVENT_FXO_BAT_DROPPED=
IFX_TAPI_EVENT_FXO_POLARITY
=
IFX_TAPI_EVENT_FXO_RING_START =
IFX_TAPI_EVENT_FXO_RING_STOP =
IFX_TAPI_EVENT_FXO_OSI
=
IFX_TAPI_EVENT_FXO_APOH
=
IFX_TAPI_EVENT_FXO_NOPOH
=
} IFX_TAPI_EVENT_ID_t;
IFX_TAPI_EVENT_TYPE_NONE | 0x0000,
IFX_TAPI_EVENT_TYPE_FXO | 0x0001,
IFX_TAPI_EVENT_TYPE_FXO | 0x0002,
IFX_TAPI_EVENT_TYPE_FXO | 0x0003,
IFX_TAPI_EVENT_TYPE_FXO | 0x0004,
IFX_TAPI_EVENT_TYPE_FXO | 0x0005,
IFX_TAPI_EVENT_TYPE_FXO | 0x0006,
IFX_TAPI_EVENT_TYPE_FXO | 0x0007,
IFX_TAPI_EVENT_TYPE_FXO | 0x0008,
4.11 M1966_DEBUG_TRACE_MASK
Description
Trace macros used by ioctl IFX_TAPI_DEBUG_REPORT_SET.
Prototype
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
Rev. 2.2
M1966_DEBUG_EVENT
M1966_DEBUG_INIT
M1966_DEBUG_RING_PATH
M1966_DEBUG_TRACE
M1966_DEBUG_COUNTRY_CODE
M1966_DEBUG_CLIP
M1966_DEBUG_LINE_STATE
M1966_DEBUG_IOCTL
M1966_DEBUG_PCM
M1966_DEBUG_BARRIER
M1966_DEBUG_INT
M1966_DEBUG_PHU
M1966_DEBUG_TAPI
M1966_DEBUG_KPROC
M1966_DEBUG_SPI
M1966_DEBUG_ERROR
0x00000001
0x00000002
0x00000004
0x00000008
0x00000010
0x00000020
0x00000040
0x00000080
0x00000100
0x00000200
0x00000400
0x00000800
0x00001000
0x00002000
0x00004000
0x80000000
31
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
4.12 M1966_CNTRY_CODE_XX
Description
Country code macros used by ioctl IFX_TAPI_CH_INIT.
Prototype
/*******************************************************************
** 73M1966 Country code List - Internet Country Codes
*******************************************************************/
#define M1966_CNTRY_CODE_AR
0
/* "Argentina"
*/
#define M1966_CNTRY_CODE_AU
1
/* "Australia"
*/
#define M1966_CNTRY_CODE_AT
2
/* "Austria"
*/
#define M1966_CNTRY_CODE_BH
3
/* "Bahrain"
*/
#define M1966_CNTRY_CODE_BE
4
/* "Belgium"
*/
#define M1966_CNTRY_CODE_BR
5
/* "Brazil"
*/
#define M1966_CNTRY_CODE_BG
6
/* "Bulgaria"
*/
#define M1966_CNTRY_CODE_CA
7
/* "Canada"
*/
#define M1966_CNTRY_CODE_CL
8
/* "Chile"
*/
#define M1966_CNTRY_CODE_C1
9
/* "ChineData"
*/
#define M1966_CNTRY_CODE_C2
10
/* "ChinaVoice"
*/
#define M1966_CNTRY_CODE_CO
11
/* "Columbia"
*/
#define M1966_CNTRY_CODE_HR
12
/* "Croatia"
*/
#define M1966_CNTRY_CODE_TB
13
/* "TBR 21"
*/
#define M1966_CNTRY_CODE_CY
14
/* "Cyprus"
*/
#define M1966_CNTRY_CODE_CZ
15
/* "Czech Rep"
*/
#define M1966_CNTRY_CODE_DK
16
/* "Denmark"
*/
#define M1966_CNTRY_CODE_EC
17
/* "Equador"
*/
#define M1966_CNTRY_CODE_EG
18
/* "Egypt"
*/
#define M1966_CNTRY_CODE_SV
19
/* "El Salvador" */
#define M1966_CNTRY_CODE_FI
20
/* "Finland"
*/
#define M1966_CNTRY_CODE_FR
21
/* "France"
*/
#define M1966_CNTRY_CODE_DE
22
/* "Germany"
*/
#define M1966_CNTRY_CODE_GR
23
/* "Greece"
*/
#define M1966_CNTRY_CODE_GU
24
/* "Guam"
*/
#define M1966_CNTRY_CODE_HK
25
/* "Hong Kong"
*/
#define M1966_CNTRY_CODE_HU
26
/* "Hungary"
*/
#define M1966_CNTRY_CODE_IS
27
/* "Iceland"
*/
#define M1966_CNTRY_CODE_IN
28
/* "India"
*/
#define M1966_CNTRY_CODE_ID
29
/* "Indonesia"
*/
#define M1966_CNTRY_CODE_IE
30
/* "Ireland"
*/
#define M1966_CNTRY_CODE_IL
31
/* "Israel"
*/
#define M1966_CNTRY_CODE_IT
32
/* "Italy"
*/
#define M1966_CNTRY_CODE_JP
33
/* "Japan"
*/
#define M1966_CNTRY_CODE_JO
34
/* "Jordan"
*/
#define M1966_CNTRY_CODE_KZ
35
/* "Kazakhstan"
*/
#define M1966_CNTRY_CODE_KW
36
/* "Kuwait"
*/
#define M1966_CNTRY_CODE_LV
37
/* "Latvia"
*/
#define M1966_CNTRY_CODE_LB
38
/* "Lebanon"
*/
#define M1966_CNTRY_CODE_LU
39
/* "Luxembourg"
*/
#define M1966_CNTRY_CODE_MO
40
/* "Macao"
*/
#define M1966_CNTRY_CODE_MY
41
/* "Malaysia"
*/
#define M1966_CNTRY_CODE_MT
42
/* "Malta"
*/
#define M1966_CNTRY_CODE_MX
43
/* "Mexico"
*/
#define M1966_CNTRY_CODE_MA
44
/* "Morocco"
*/
#define M1966_CNTRY_CODE_NL
45
/* "Netherlands" */
#define M1966_CNTRY_CODE_NZ
46
/* "New Zealand" */
#define M1966_CNTRY_CODE_NG
47
/* "Nigeria"
*/
#define M1966_CNTRY_CODE_NO
48
/* "Norway"
*/
32
Rev. 2.2
UG_1x66B_021
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
#define
Rev. 2.2
M1966_CNTRY_CODE_OM
M1966_CNTRY_CODE_PK
M1966_CNTRY_CODE_PR
M1966_CNTRY_CODE_PH
M1966_CNTRY_CODE_PL
M1966_CNTRY_CODE_PT
M1966_CNTRY_CODE_RO
M1966_CNTRY_CODE_RU
M1966_CNTRY_CODE_SA
M1966_CNTRY_CODE_SG
M1966_CNTRY_CODE_SK
M1966_CNTRY_CODE_SI
M1966_CNTRY_CODE_ZA
M1966_CNTRY_CODE_KR
M1966_CNTRY_CODE_ES
M1966_CNTRY_CODE_SE
M1966_CNTRY_CODE_CH
M1966_CNTRY_CODE_SY
M1966_CNTRY_CODE_TW
M1966_CNTRY_CODE_TH
M1966_CNTRY_CODE_AE
M1966_CNTRY_CODE_UK
M1966_CNTRY_CODE_US
M1966_CNTRY_CODE_YE
73M1866B/73M1966B TAPI High-Level Driver User Guide
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
/*
"Oman"
"Pakistan"
"Peru"
"Philippines"
"Poland"
"Portugal"
"Romainia"
"Russia"
"Saudi Arabia"
"Singapore"
"Slovakia"
"Slovenia"
"S. Africa"
"S. Korea"
"Spain"
"Sweden"
"Switzerland"
"Syria"
"Taiwan"
"Thailand"
"UAE"
"UK"
"USA"
"Yemen"
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
33
73M1866B/73M1966B TAPI High-Level Driver User Guide
UG_1x66B_021
5 Related Documentation
The following 73M1x66B documents are available from Teridian Semiconductor Corporation:
73M1866B/73M1966B Reference Driver User Manual
73M1866B/73M1966B Data Sheet
73M1866B/73M1966B Demo Board User Manual
73M1866B/73M1966B GUI User Guide
73M1866B/73M1966B Layout Guidelines
73M1x66 Worldwide Design Guide
TAPI V3 User’s Manual (available from Infineon)
6 Contact Information
For more information about Teridian Semiconductor products or to check the availability of the 73M1866B
and 73M1966B, contact us at:
6440 Oak Canyon Road
Suite 100
Irvine, CA 92618-5201
Telephone: (714) 508-8800
FAX: (714) 508-8878
Email: [email protected]
For a complete list of worldwide sales offices, go to http://www.teridian.com.
34
Rev. 2.2
UG_1x66B_021
73M1866B/73M1966B TAPI High-Level Driver User Guide
Revision History
Revision
Date
1.0
10/28/2008
First publication.
2.0
3/20/2009
Provided detail IOCTL interface.
Removed redundant implementation description (those should be referred
to the 73M1866B/73M1966B Reference Driver User Guide).
Restructured document to conform to Teridian standard format.
2.2
7/16/2010
Added FXO line enable/disable IOCTLs.
Rev. 2.2
Description
35