DATA SHEET CLL620-0101B2-403M1C5

DATA SHEET
CLL620-0101B2-403M1C5
and　are trademarks or registered trademarks of CITIZEN HOLDINGS CO., LTD. JAPAN.
is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN.
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
1/13
1. Scope of Application
This data sheet is applied to the LED package, model CLL620-0101B2-403M1C5.
2. Part code
CLL 620 - 01 01 B2 - 40 3 M1 C5
[1]
[2]
[3]
[4]
[5]
[6]
[1] Part Code
[2] Dies in series quantity
1
[3] Dies in parallel quantity
1
[4] Correlated color temperature
4000K
[5] Chromaticity range
ＭａｃＡｄａｍ 3Step
[6] CRI
Ra 80min.
<　Features　>
- External Dimensions: 2.0 x 0.8 x 0.75
- Internal Structure: Chip LED Type
-Luminous Flux: 27 lm @ 80 mA
-CCT: 4000K (ＭａｃＡｄａｍ 3Step)
-CRI: Ra 80min.
-Thermal Resistance: 90 C/W
- RoHS Compliant
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
2/13
3. Outline drawing
Unit : mm
Tolerances unless otherwise specified : +/-0.1
4. Performance
(1) Absolute Maximum Rating
Parameter
Symbol
Rating Value
Unit
Input Power
0.315
*1
Pi
W
IF
mA
Forward Current
90
*1
IF min
5
mA
Mnimum current
VR
V
Reverse Voltage
5
T
-30
~
+85
C
Operating Temperature
op
Tst
-40 ~ +100
C
Storage Temperature
Tj
120
C
Junction Temperature
*3
*1 Input power and forward current are the values when the LED is used within the range of
the derating curve in this data sheet.
*2 Refer to 3. Outline drawing for Tc measurement point
*3 D.C. Current : Tj = Ts + Rj-s X Pi
*Ts:Solder terminal(Cathode) temperature.
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
3/13
4. Performance
(2) Electro-optical Characteristics
Parameter
Forward Voltage
Reverse Current
Symbol
VF
IR
Condition
IF=80mA
VR=5V
Luminous Flux
CRI
Thermal Resistance
Φv
Ra
IF=80mA
IF=80mA
Rj-ｓ　*1
Junction-Solder
Min.
2.90
22.9
80
-
Typ.
3.20
27.0
83
90.0
Max.
3.50
100
31.1
-
Ts=25C
Unit
V
μA
lm
C/W
*1　Thermal Resistance : Junction-Solder terminal
(3) Ranking (Condition : IF=80mA, Ts=25C)
Parameter
Symbol
Rank
Min.
Max.
2.90
3.10
Q
Forward Voltage
3.10
3.30
VF
R
3.30
3.50
S
22.9
25.6
B
Luminous Flux
25.6
28.4
ΦV
C
28.4
31.1
D
*1 The tolerance of measurement at our tester is VF±3% , φv±7%
Unit
V
lm
*For an order, products within the rank listed above will be delivered.
Except designation of a delivery proportion of each rank.
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
4/13
Chromaticity coordinates ( Condition : IF=80mA, Tc = 25C）
x-y chart-CIE1931
0.41
0.40
Color region
y
0.39
Color region
(ANSI)
0.38
B.B. Locus
0.37
0.36
0.35
0.36
0.37
0.38
x
0.39
0.40
0.41
Center
Reference　(ANSI C78.377)
x
y
x
y
0.3818
0.3797
Center 0.3818 0.3797
Oval parameter
a
0.4006 0.4044
4000K
a
0.00939
b
0.3736 0.3874
b
0.00402
c
0.3670 0.3578
θ°
54.00
d
0.3898 0.3716
*1 The tolerance of measurement at our tester is Chromaticity(x,y)±0.01
*For an order, products within the rank listed above will be delivered.
Except designation of a delivery proportion of each rank.
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
5/13
5. Characteristics
Forward Current vs. Forward Voltage
Forward Current vs. Relative Luminous Flux
Ts=25C
3.30
3.20
Relative Luminous Flux [a.u.]
120%
3.10
3.00
VF [V]
Ts=25C
140%
2.90
2.80
2.70
2.60
0
20
40
60
80
100%
80%
60%
40%
20%
0%
100
0
20
IF [mA]
40
60
100
IF [mA]
Forward Current vs. Chromaticity Coordinate
Solder Temperature vs. Chromaticity Coordinate
Ts=25C
0.025
80
IF=80mA
0.025
0.020
Δｘ
0.015
Δｙ
Δｘ
0.020
Δｙ
0.015
0.010
0.005
0.005
△x, △y
△x, △y
0.010
0.000
0.000
-0.005
-0.005
-0.010
-0.010
-0.015
-0.015
-0.020
-0.020
-0.025
-0.025
0
20
40
60
80
100
0
IF [mA]
25
50
75
100
Ts [C]
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
Solder Temperature vs. Forward Voltage
6/13
Solder Temperature vs. Relative Luminous Flux
IF=80mA
IF=80mA
3.4
120%
Relative Luminous Flux [a.u.]
100%
VF [V]
3.3
3.2
3.1
80%
60%
40%
20%
3.0
0%
0
25
50
75
100
0
Tｓ [C]
Case Temperature vs. Allowable Forward Current
25
50
75
100
Ts [C]
Spectrum
Tc=25C, IF =80 mA
100
120%
90
100%
Relative Emission Intensity [a.u.]
80
IF [mA]
70
60
50
40
30
20
10
0
0
25
50
75
100
125
150
80%
60%
40%
20%
0%
350
450
550
650
750
850
λ [nm]
Ts [C]
Directive Characteristic
-40°
-30°
-20° -10°
10° 20°
30°
40°
100%
-50°
50°
80%
Y
-60°
60%
60°
-70°
40%
70°
-80°
20%
80°
-90°
0%
90°
X
X direction
Y direction
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
7/13
6. Reliability
(1) Datails of the tests
Test Item
Continuous Operation Test
Low Temperature Storage Test
High Temperature Storage Test
Moisture-proof Test
Thermal Shock Test
Test Condition
IF=80mA　Ta=25C × 1000 hours
-40 C × 1000 hours
100 C × 1000 hours
85 C, 85 %RH for 500 hours
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
(2) Judgement Criteria of Failure for Reliability Test
(Ta=25C)
Measuring Item
Forward Voltage
Reverse Current
Total Luminous Flux
Symbol
VF
IR
Φv
Measuring Condition
IF=80mA
VF=5V
IF=80mA
Judgement Criteria for Failure
>U X 1.1
>　U×2
<S X 0.7
U defines the upper limit of the specified characteristics. S defines the initial value.
Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
return to the normal ambient conditions after the completion of each test.
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
8/13
7. Taping Specifications (in accordance with JIS standard)
(1) Shape and Dimensions of Reel
(Unit:mm)
21 ±0.8
13 ±0.5
+1
0
0
3
60
180 -
2 ±0.5
Name.
Qty
Lot No.
9 ±0.3
11.4 ±1.0
(2) Dimensions of Tape
(Unit:mm)
Polarity
(3) Configuration of Tape
(END)
more than 40mm Mounted with CITILED
(START)
Leading part more than 400mm
Unloaded tape
(4) Quantity : 3000pcs/reel
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
9/13
8.Soldering
8-1, Lead free soldering
(1) Following soldering paste is recommended
Melting temperature : 216 ~ 220C.
Composition : Sn 3.5Ag 0.75Cu
(2) The temperature profile at the top surface of the parts is recommended as shown below.
T e m p e ra tu re
(3) It is requested that products should be handled after their temperature has dropped
down to the normal room temperature
4 °C/sec. Max
4 °C/sec. Max
260 °C Max
3sec. Max
220 °C
160 ~ 180 °C
140sec
60 ~ 70sec
Time
8-2 Recommended soldering pattern
Anode Pad
Mountability and solderability need to be
optimized with actual conditions such as
amount of solder, reflow temperature
applied in the process.
Center
Cathode Pad
8-3. Recommended pickup nozzle
Shape
Dimension
: Circular
: Diameter more than 1.2mm
8-4. Washing
(1) When washing after soldering is needed, following conditions are requested.
a) Washing solvent: Pure Water
b) Temperature, time: 50C or less × 30 seconds max or 30C or less × 3 minutes max.
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
10/13
9. Packing Specifications
9-1. Moisture-proof Packing
To prevent moisture absorption during transportation and storage, reels are packed in
aluminum envelopes
Al u mi n um e nv el o p
Re el
Po l ye ste r Zip fastene r
L abe l
9-2. Storage
To prevent moisture absorption, it is strongly recommended that reels (in bulk or
taped) should be stored in the dry box (or the desiccator) with a desiccant as the
appropriate storage place. If not, the following is recommended.
Temperature :
Humidity :
5~30C
60%RH max.
The devices should be mounted as soon as possible after unpacking. If you store the
unpacked reels, please store them in the dry box or seal them into the envelop again.
Moisture Sensitive Level 1. (IPC/JEDEC J-STD-020C)
Storage limitation : Before Unpacked Alminium envelop : 1 year from delivered day.
After Unpacked Alminium envelop : 168H
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
11/13
10．Precautions
(1) Handling with care for this product
-When assembling the circuit board into the finished products, care must be taken to avoid
the component parts from touching other parts.
-Please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail
(e.g. edge of reflector part) because the function, performance and reliability of this product
are negatively impacted.
(2) Countermeasure against static electricity
-Handling of this product needs countermeasures against static electricity
because this is a semiconductor product.
-Please take adequate measures to prevent any static electricity being produced
such as the wearing of a wristband or anti-static gloves when handling this product.
-Every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine
and conveyance unit) should be connected to ground and please avoid the product to be electric-charged.
-After assembling the LEDs into your final product(s), it is recommended to check
whether the assembled LEDs are damaged by static electricity (electrical leak phenomenon) or not.
-It is easy to find static damaged LED dies by a light-on test with the minimum current value.
(3) Thermal Design
-The thermal design to draw heat away from the LED junction is most critical parameter
for an LED illumination system. High operating temperatures at the LED junction adversely affect
the performance of LED’s light output and lifetime. Therefore the LED junction temperature should
not exceed the absolute maximum rating in LED illumination system.
-The LED junction temperature while operation of LED illumination system depends upon
thermal resistance of internal LED package (Rj-c), outer thermal resistances of LED package,
power loss and ambient temperature. Please take both of the thermal design specifications
and ambient temperature conditions into consideration for the setting of driving conditions.
-For more information, please refer to application note "Thermal Management".
(4) Driving Current
-A constant current is recommended as an applying driving current to this product.
In the case of constant voltage driving, please connect current-limiting resistor to each products in series
and control the driving current to keep under the absolute maximum rating forward current value.
-Electrical transient might apply excess voltage, excess current and reverse voltage to the product(s).
They also affect negative impact on the product(s) therefore please make sure that no excess voltage,
excess current and reverse voltage is applied to the product(s)
when the LED driver is turn-on and/or turn-off.
-For more information, please refer to application note "Driving".
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
Ref.CE-P2508 06/13 R2(0414)
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
12/13
10. Precautions (continued)
(5) Lighting at a minimum current value
-In a case where the minimum current(IF min) is applied to the product,
some of LED dice in the product might look different in their brightness
due to the individual difference of the LED dice, and they are not failed.
(6) Eye Safety
-The International Electrical Commission (IEC) published in 2006 IEC 62471
”2006 Photobiological safety of lamps and lamp systems ” which includes LEDs within its scope.
-When sorting single LEDs according to IEC 62471, almost all white LEDs can be classified
as belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk).
-However, Optical characteristics of LEDs such as radiant flux,
spectrum and light distribution are factors that affect the risk group determination of the LED,
and especially a high-power LED, that emits light containing blue wavelengths,
might have properties equivalent to those of Risk Group 2 (moderate risk).
-Great care should be taken when directly viewing an LED that is driven at high current,
has multiple uses as a module or when focusing the light with optical instruments,
as these actions might greatly increase the hazard to your eyes.
-It is recommended to regard the evaluation of stand-alone LED packages as a reference
and to evaluate your final product.
(7) Usage Condition
-This product is not designed for usage under the following conditions.
If the product might be used under the following conditions, you shall evaluate its effect
and appropriate them. In places where the product might:
-directly and indirectly get wet due to rain and/or at place with the fear.
-be damage by seawater and/or at place with the fear
-be exposed to corrosive gas (such as Cl2, H2S, NH3, SOx, NOx and so on) and/or at place with the fear.
-be exposed to dust, fluid or oil and/or at place with the fear.
-It is requested to avoid applying any stress to the resin portion of this product.
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
Ref.CE-P2508 06/13 R2(0414)
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)
DATA SHEET
13/13
11. Precautions with regard to product use
(1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS'
products are used as intended. CITIZEN ELECTRONICS neither makes warranties or
representations with respect to the accuracy or completeness of the information contained
in this document nor grants any license to any intellectual property rights or any any other
rights of CITIZEN ELECTRONICS or any third party with respect to the information
in this document.
(2) All information included in this document such as product data, diagrams, charts,
is current as of the date this document is issued.
Such information, however, is subject to change without any prior notice.
Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document,
please confirm the latest product information with a CITIZEN ELECTRONICS' sales office,
and formal specifications must be exchanged and signed by both parties prior to mass production.
(3) CITIZEN ELECTRONICS has used reasonable care in compiling the information
included in this document,
but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as
a result of errors or omissions in the information included in this document.
(4) Absent ａ written signed agreement, except as provided in the relevant terms and conditions of
sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS
assumes no liability whatsoever, including without limitation, indirect, consequential, special,
or incidental damages or loss, including without limitation, loss of profits, loss of opportunities,
business interruption and loss of data, and disclaims any and all express or implied warranties
and conditions related to sale, use of product, or information, including warranties
or conditions of merchantability, fitness for a particular purpose, accuracy of information,
or no infringement.
(5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability,
products can malfunction or fail. Customers are responsible for complying with safety standards
and for providing adequate designs and safeguards to minimize risk and avoid situations
in which a malfunction or failure of a product could cause loss of human life,
bodily injury or damage to property, including data loss or corruption.
In addition, customers are also responsible for determining the appropriateness of
use of any information contained in this document such as application cases not only with
evaluating by their own but also by the entire system.
CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.
(6) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding
the information contained in this document, or if you have any other inquiries.
CITIZEN Micro HumanTech is a registered trademark of Citizen Holding Co., Japan.
CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan
Symbol
CITILED
Name
CLL620-0101B2-403M1C5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2508 06/13 R2(0414)