MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# 2N7002KDW Features • • • • • • • • High density cell design for Low RDS(ON) Voltage controlled small signal switch Rugged and reliable High saturation current capability ESD protected up to 2KV Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Halogen free available upon request by adding suffix "-HF" N-Channel Enhancement Mode Field Effect Transistor SOT-363 Mechanical Data • • • • G Case: SOT-363, Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Terminal Connections: See Diagram Marking: 72K C B A Maximum Ratings • • • H Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Maximum Thermal Resistance; 833oC/W Junction To Ambient Parameter Symbol Value Unit VDSS 60 V M K J D L DIMENSIONS Drain-Source-Voltage Drain Current ID Total Power Dissipation PD 340 150 mA mW INCHES DIM A B C D G H J K L M MIN .006 .045 .085 MAX .014 .053 .096 .026 .047 .071 --.035 .010 .003 .055 .087 .004 .043 .018 .006 MM MIN MAX 0.15 0.35 1.15 1.35 2.15 2.45 0.65Nominal 1.20 1.40 1.80 2.20 --0.10 0.90 1.10 0.26 0.46 0.08 0.15 NOTE Equivalent circuit www.mccsemi.com Revision: A 1of 3 2015/01/26 MCC 2N7002KDW TM Micro Commercial Components MOSFET ELECTRICAL CHARACTERISTICS (Ta=25℃ unless otherwise specified) Parameter Symbol Test Condition Min Typ Max Units Static Characteristics Drain-Source Breakdown Voltage VGS = 0V, ID =250µA 60 VGS(th) VDS =VGS, ID =1mA 1 Zero Gate Voltage Drain Current IDSS VDS =48V,VGS = 0V 1 µA Gate –Source leakage current IGSS VGS =±20V, VDS = 0V ±10 µA Drain-Source On-Resistance* RDS(on) VGS = 4.5V, ID =200mA 5.3 Ω 5 Ω 1.5 V Gate Threshold Voltage* VDS V 2.5 VGS =10V,ID =500mA Diode Forward Voltage VSD VGS=0V, IS=300mA Recovered charge Qr VGS=0V,IS=300mA,VR=25V, dls/dt=-100A/µs 30 V nC Dynamic Characteristics** Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss VDS =10V,VGS =0V,f =1MHz 40 pF 30 pF 10 pF 10 ns 15 ns Switching Characteristics** Turn-On Delay Time td(on) Turn-Off Delay Time td(off) Reverse recovery Time trr VGS=10V,VDD=50V,RG=50Ω, RGS=50Ω, RL=250Ω VGS=0V,IS=300mA,VR=25V, dls/dt=-100A/µs 30 ns GATE-SOURCE ZENER DIODE Gate-Source Breakdown Voltage BVGSO Igs=±1mA (Open Drain) ±21.5 ±30 V Notes: *Pulse Test : Pulse Width ≤300µs, Duty Cycle ≤2%. **These parameters have no way to verify. www.mccsemi.com Revision: A 2 of 3 2015/01/26 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 3 of 3 2015/01/26