MCC Micro Commercial Components Features • • • • • • • MB05S THRU MB10S omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Glass Passivated Diode Construction o High Temperature Soldering Guaranteed:260 C/10 Second Saves Space On Printed Circuit Board Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) 0.5 Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts MBS -1 Mechanical Data • • Teminals: Plated leads Solderable per MIL-STD-750,Method 2026 UL Recognized File # E165989 Maximum Maximum Maximum MCC DC RMS Recurrent Part Device Blocking Voltage Number Marking Peak Reverse Voltage Voltage MB05S MB05S 50V 35V 50V MB1S MB1S 100V 70V 100V MB2S MB2S 200V 140V 200V MB4S MB4S 400V 280V 400V MB6S MB6S 600V 420V 600V MB8S MB8S 800V 560V 800V MB10S MB10S 1000V 700V 1000V ∼ ∼ Typical Junction Capacitance Rating For Fusing Operating Junction and Storage Temperature Range Notes: IFSM F A K M J Electrical Characteristics @ 25 C Unless Otherwise Specified 0.5 A(2) 0.8 A(3) 35A + C O IF(AV) D B E G H Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Thermal Resistance - See Fig.1 8.3ms, half sine N + ~ - ~ Case Style VF IR 1.0V 5uA 100uA RthJA R thJA R thJL CJ (2) O 85 C /W O (3) C /W 70 (2) O 20 C /W 13pF I2t TJ TSTG 5.0A2s -55to+150 O C IFM = 0.4A; TA = 25OC O C TA = 25 O C TA = 125 per leg Measured at 1.0MHz, VR=4.0V t<8.30ms C D M N .252 .276 6 .142 .165 .179 .195 .019 .031 .090 .106 .002 .008 .027 .043 .058 .062 .195 .205 .039 .049 .006 .016 6.40 3.60 4.55 0.50 2.30 0.05 0.70 1.47 4.95 0.99 0.15 7.00 2.70 4.20 4.95 0.80 2.70 0.20 1.10 1.57 5.21 1.24 0.41 Mounting Pad Layout 0.031 0.80 1. High Temperature Solder Exemption Applied, see EU Directive Annex Notes 7 2. On glass epoxy P.C.B. mounted on 0.05 x 0.05”(1.3 x 1.3mm)pads 3. On aluminum substrate P.C.B. with an area of 0.8” x 0.8”(20 x 20mm) mounted on 0.05 x 0.05”(1.3x 1.3mm) solder pad 0.280 (7.10) 0.055 (1.40) 0.105 (2.67) 0.095 (2.41) Revision: G www.mccsemi.com 1 of 3 2015/01/13 MCC MB05S thru MB10S TM Micro Commercial Components Figure 2 Typical Reverse Characteristics Figure 1. Derating Curve for Output Rectified Current 100 60 Average Forward Rectified Current (A) 0.8 Aluminum Substrate 40 0.7 0.6 20 0.5 10 Glass Epoxy P.C.B. 0.4 0.3 6 4 0.2 2 Resistive or Inductive Load 0.1 µAmps 1 0 0 20 40 60 100 80 120 140 .6 160 Ambient Temperature (°C) .4 .2 TA=25°C .1 .06 Figure 3 Typical Forward Characteristics .04 20 .02 10 .01 20 40 60 6 80 100 120 140 Volts% Instantaneous Reverse Leakage Current - MicroAmperesversus Percent Of Rated Peak Reverse Voltage - Volts% 4 2 25°C Amps Figure 5 Peak Forward Surge Current 1 60 .6 50 .4 40 .2 30 .1 Amps .06 .04 20 10 .02 0 .01 .4 .6 .8 1.0 1.2 1 2 4 6 1.4 8 10 20 40 60 80 100 Cycles Volts Peak Forward Surge Current - Amperes versus Number Of Cycles At 50Hz - Cycles Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts www.mccsemi.com Revision: G 2 of 3 2015/01/13 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-TP Tape&Reel;3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: G 3 of 3 2015/01/13