series Marvell Avastar 88W8782U WLAN SoC Supports a USB 2.0 Interface for Connecting WLAN Activity to the Host Processor PRODUCT OVERVIEW The Marvell® Avastar™ 88W8782U is a highly integrated wireless local area network (WLAN) system-on-chip (SoC), specifically designed to support high throughput data rates for next generation WLAN products and is part of the Marvell Avastar family of wireless devices. The Avastar family includes single-function and multi-function radios that establish new industry benchmarks for power consumption, wireless performance, solution footprint and advanced features. The Marvell Avastar 88W8782U is designed to support IEEE 802.11a/g/b and 802.11n payload data rates. The device provides the combined functions of Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) baseband modulation, Medium Access Controller (MAC), CPU, memory, host interfaces, and direct-conversion WLAN RF radio on a single integrated chip. For security, the 88W8782U supports 802.11i security standards through implementation of the Advanced Encryption Standard (AES)/Counter Mode CBC-MAC Protocol (CCMP), Wired Equivalent Privacy (WEP) with Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES)/Cipher-Based Message Authentication Code (CMAC), and WLAN Authentication and Privacy Infrastructure (WAPI) security mechanisms. For video, voice, and multimedia applications, 802.11e Quality of Service (QoS) is supported. Also supported are 802.11h Dynamic Frequency Selection (DFS) for detecting radar pulses when operating in the 5 GHz range. The device is also equipped with a coexistence interface for external, co-located 2.4 GHz radios. The 88W8782U supports a USB 2.0 interface for connecting WLAN activity to the host processor. The device is available in a QFN package option. BLOCK DIAGRAM WLAN MAC / Baseband Direct Conversion RF Encryption c Processor JTAG Interface C P U Feroceon CPU SRAM / ROM SRAM T/R T/R Switch 802.11 Baseband (DSSS/OFDM) B U S Power Management Power Management Power Down Sleep Clock LDOs LDO I N T E R N A L PA T/R Switch 2.4 GHz WLAN Tx/Rx LNA Interface Timers / Interrupts 5 GHz WLAN Tx 5 GHz WLAN Rx LNA WLAN RF Coexistence Arbiter CPU JTAG PA 802.11 MAC Coexistence Interface Common Analog DMA Common Analog Unit XTAL_IN XTAL_OUT REF_CLK_OUT B U S Peripheral Bus Host Interface 3-Wire, 4-Wire Interface 2-Wire Serial Interface 1-Wire Serial Interface Serial EEPROM Clocked Serial Unit UART UART GPIO GPIO/LED B U S Peripheral Bus Unit USB OTP Fig 1. Avastar 88W8782U SoC Block Diagram USB 2.0 series Marvell Avastar 88W8782U WLAN SoC SPECIFICATIONS APPLICATIONS WLAN MAC • Imaging platforms (printers, digital still cameras (DSC), digital picture frames) • Ad-Hoc and Infrastructure Modes • Gaming platforms • Consumer electronic devices (TV, DVD players, Blu-ray players, etc.) • Hardware filtering of 32 multicast addresses and duplicate frame detection for up to 32 unicast addresses • Cell phones and other mobile applications • On-chip Tx and Rx FIFO for maximum throughput • eBooks • Open System and Shared Key Authentication services • RTS/CTS for operation under DCF • A-MPDU Rx (de-aggregation) and Tx (aggregation) • 20/40 MHz coexistence GENERAL FEATURES • Single-chip integration of 802.11 wireless radio, baseband, MAC, CPU, memory, host interface • Reduced Inter-Frame Spacing (RIFS) bursting • Management information base counters • Radio resource measurement counters • CMOS and low-swing sinewave input clock • Block acknowledgement with 802.11n extension • 12, 13, 19.2, 20, 24, 26, 38.4, 40, 44, and 52 MHz crystal clock support with auto-frequency detection if external sleep clock is available • Dynamic frequency selection (DFS) • Transmit beamformee support • Low power operation supporting deep sleep and standby modes • Transmit power control • Power management with external sleep clock support for near zero deep sleep power • Long and short preamble generation on a frame-by-frame basis for 802.11b frames • Option to power directly from battery or to use 3.3V/1.8V/1.2V preregulated supplies • Marvell Mobile Hotspot • One time programmable (OTP) memory to eliminate need for external EEPROM • Fully compatible with Marvell Power Management device(s) • Transmit rate adaptation WLAN BASEBAND • 802.11n 1x1 SISO (on-chip Marvell SISO RF radio) • Backward compatibility with legacy 802.11a/g/b technology IEEE 802.11/STANDARDS • 802.11 data rates of 1 and 2 Mbps • 802.11b data rates of 5.5 and 11 Mbps • PHY data rates up to 150 Mbps • 20 MHz bandwidth/channel, 40 MHz bandwidth/channel, upper/lower 20 MHz bandwidth in 40 MHz channel, and 20 MHz duplicate legacy bandwidth in 40 MHz channel mode operation • 802.11a/g data rates 6, 9, 12, 18, 24, 36, 48, and 54 Mbps for multimedia content transmission • Modulation and Coding Scheme (MCS)—0~7 and 32 (duplicate 6 Mbps) • 802.11g/b performance enhancements • Enhanced AGC scheme for DFS channel • 802.11n compliant, with maximum data rates up to 72 Mbps (20 MHz channel) and 150 Mbps (40 MHz channel) • 802.11d international roaming • 802.11e QoS block acknowledgement (with support for 802.11n extension) • 802.11h transmit power control • 802.11h DFS radar pulse detection • 802.11i enhanced security • 802.11k radio resource measurement • 802.11r fast hand-off for AP roaming • 802.11w protected management frames • Enhanced radar detection for long and short pulse radar • Japan DFS requirements for W53 and W56 • Radio resource measurement • Optional 802.11n SISO features: - 20/40 MHz coexistence - 1-stream STBC reception - Short guard interval - RIFS on receive path - Beamformee function and hardware acceleration - Greenfield Tx/Rx • Power save features • Fully supports clients (stations) implementing IEEE Power Save mode • Wi-Fi Direct connectivity WLAN RADIO • Integrated direct-conversion radio PACKAGING • QFN PROCESSOR • CPU - Integrated Marvell Feroceon® CPU (ARMv5TE-compliant) - 128 MHz maximum CPU clock speed • DMA - Independent 2-Channel Direct Memory Access (DMA) • 20 and 40 MHz channel bandwidths • Integrated T/R switch, PA, and LNA for 2.4 GHz path • Integrated PA and LNA for 5 GHz path • WLAN Rx Path - Direct conversion architecture eliminates need for external SAW filter - On-chip gain selectable LNAs with optimized noise figure and power consumption - High dynamic range AGC function in receive mode • WLAN Tx Path - Integrated power amplifiers with power control - Closed/open loop power control (0.5 dB increments) MEMORY - Optimized Tx gain distribution for linearity and noise performance • Internal SRAM for Tx frame queues/Rx data buffers • Boot ROM • ROM patching capability • WLAN Local Oscillator - Fractional-N for multiple reference clock support - Fine channel step, AFC (adaptive frequency control) series Marvell Avastar 88W8782U WLAN SoC SPECIFICATIONS WLAN ENCRYPTION • WEP 64- and 128-bit encryption with hardware TKIP processing (WPA) • AES-CCMP hardware implementation as part of 802.11i security standard (WPA2) • Enhanced AES engine performance • AES-Cipher-Based Message Authentication Code (CMAC) as part of the 802.11w security standard • WLAN Authentication and Privacy Infrastructure (WAPI) COEXISTENCE • Coexistence interface for external, co-located 2.4 GHz radio - Marvell 3/4-wire interface - WL_ACTIVE 3/4-wire interface - WL_ACTIVE 2-wire interface HOST INTERFACES • USB 2.0 interface PERIPHERAL BUS INTERFACES • Clocked Serial Unit (CSU) - 3-Wire, 4-Wire Serial Interface - 2-Wire Serial Interface - 1-Wire Serial Interface - SPI EEPROM Interface • 16550 UART • General Purpose Input Output (GPIO) • OTP memory to eliminate need for external EEPROM TEST • On-chip diagnostic information series Marvell Avastar 88W8782U WLAN SoC THE MARVELL ADVANTAGE: Marvell chipsets come with complete reference designs which include board layout designs, software, manufacturing diagnostic tools, documentation, and other items to assist customers with product evaluation and production. Marvell’s worldwide field application engineers collaborate closely with end customers to develop and deliver new leading-edge products for quick time-to-market. Marvell utilizes worldleading semiconductor foundry and packaging services to reliably deliver high-volume and low-cost total solutions. ABOUT MARVELL: Marvell is a leader in storage, communications, and consumer silicon solutions. Marvell’s diverse product portfolio includes switching, transceiver, communications controller, processor, wireless, power management, and storage solutions that power the entire communications infrastructure, including enterprise, metro, home, storage, and digital entertainment solutions. For more information, visit our Web site at www.marvell.com. Marvell Semiconductor, Inc. 5488 Marvell Lane Santa Clara, CA 95054 Phone 408.222.2500 www.marvell.com Copyright © 2010. Marvell International Ltd. All rights reserved. Marvell, Moving Forward Faster, the Marvell logo, Alaska, AnyVoltage, DSP Switcher, Fastwriter, Feroceon, Libertas, Link Street, PHYAdvantage, Prestera, TopDog, Virtual Cable Tester, Yukon, and ZJ are registered trademarks of Marvell or its affiliates. Armada, Avastar, CarrierSpan, LinkCrypt, Marvell Smart, PowerSmart PFC, Powered by Marvell Green PFC, Qdeo, QuietVideo, Sheeva, TwinD, and VCT are trademarks of Marvell or its affiliate. All other trademarks are the property of their respective owners. Avastar_88W8782U-01 4/10