2 PHASE COMMON MODE CHOKE P504V SERIES • Current compensated noise suppression common mode chokes • Vertical mount version • Rate voltage: 250Vac • Dielectric withstanding voltage: 1500 Vrms (between windings) • Operating temperature range: 0°C to +70°C • Custom design available upon request • RoHS compliant product ELECTRICAL PARAMETERS @ 25°C Part Number P504V- OCL (mH ±30%) 03 3.3 10 10 Current (A) DCR (Ω ±20%) SRF (KHz Typ) 2.5 0.07 700 1.2 0.30 350 15 15 1.0 0.40 220 27 27 0.7 0.62 180 39 39 0.5 1.12 160 47 47 0.4 1.30 150 Note: 1. OCL measured: 1KHz, 0.1Vrms 2. Polarity: 3 and 5 are in phase 3. Turns Ratio: 1:1 ±0% (3-4 to 5-6) DIMENSIONS Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 SCHEMATIC Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.010 .XXX : ±0.005 mm: X,X : ±0,254 X,XX : ±0,13 www.mpsind.com [email protected]