NPF-40 40W Single Output Switching Power Supply F 110 M ■ Features Universal AC input / Full range (up to 305VAC) Built-in active PFC function High efficiency up to 90% Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection Fully isolated plastic case Fully encapsulated with IP67 level Class Ⅱ power unit, no FG Class 2 power unit Suitable for dry / damp / wet locations No load power consumption<0.15W 5 years warranty ■ Description M SELV series IP67 ■ Applications Indoor LED lighting LED lighting decorative LED architecture lighting Moving sign Tunnel lighting NPF-40 is one 40W waterproof single-output LED power supply series. It adopts the universal input range from 90VAC to 305VAC and incorporates the built-in PFC function. The enclosure design is a 94V-0 flame retardant plastic case. The interior is fully potted with silicone that enhances the heat dissipation and allows the power supply to meet the anti-vibration demand up to 5G; it also thus conforms to IP67 level, enabling NPF-40 to be used in a highly dusty and highly humid harsh environment. Providing a high efficiency up to 90% and a low no load power consumption below 0.15W, NPF-40 can meet the energy saving demand for the new generation LED lighting. The classⅡdesign (without FG pin) and the double insulation weather-resistant cable (SJTW) on the input side make it convenient for users to flexibly install on various types of lighting systems. The entire series can operate under the temperature between -40~+70℃ and comply with the relevant global lighting safety certification. ■ Model Encoding NPF - 40 - 12 Output voltage Output wattage Series name File Name:NPF-40-SPEC 2015-05-28 NPF-40 40W Single Output Switching Power Supply series SPECIFICATION MODEL NPF-40-12 NPF-40-15 NPF-40-20 NPF-40-24 NPF-40-30 NPF-40-36 NPF-40-42 NPF-40-48 NPF-40-54 OUTPUT 12V 30V 36V 15V 20V 24V CONSTANT CURRENT REGION 7.2 ~ 12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V RATED CURRENT 3.34A 2.67A 2A 1.67A 1.34A 1.12A RATED POWER 40.08W 40.08W 40W 40.08W 40.2W 40.32W DC VOLTAGE 42V 48V 54V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V 0.96A 0.84A 0.76A 40.32W 40.32W 41.04W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p 350mVp-p VOLTAGE TOLERANCE Note.3 ±4.0% ±4.0% ±4.0% ±3.0% ±3.0% ±2.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.5% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME Note.4 500ms, 80ms at 95% load 115VAC / 230VAC HOLD UP TIME (Typ.) 16ms/230VAC VOLTAGE RANGE 90 ~ 305VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) 16ms/115VAC at full load 127 ~ 431VDC TOTAL HARMONIC DISTORTION THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input INPUT 88% 89% EFFICIENCY (Typ.) 86% AC CURRENT (Typ.) 0.6A / 115VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=270μs measured at 50% Ipeak) at 230VAC 87% 89% 0.3A / 230VAC 90% 90% 90% 90% 0.25A / 277VAC MAX. No. of PSUs on 16A 9 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.25mA / 277VAC SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed OVER CURRENT PROTECTION 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed 15 ~ 17V OVER VOLTAGE 17.5 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 40V 41 ~ 46V 46 ~ 54V 54 ~ 60V 59 ~ 66V Protection type : shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 95% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP67 approved; Design refer to EN60335-1 SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge 2KV), criteria A MTBF OTHERS DIMENSION PACKING NOTE I/P-O/P:3.75KVAC 368K hrs min. MIL-HDBK-217F (25℃) 150*53*35mm (L*W*H) 0.49Kg;30pcs/15.7Kg/1.0CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. File Name:NPF-40-SPEC 2015-05-28 NPF-40 40W Single Output Switching Power Supply series Block Diagram PFC fosc : 50~120KHz PWM fosc : 60~130KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V O.L.P. O.T.P. DETECTION CIRCUIT O.L.P. PWM & PFC CONTROL O.V.P. Derating Curve Static Characteristics 100 100 90 80 230VAC Input only 80 70 50 LOAD (%) LOAD (%) 60 40 20 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 60 50 40 90 100 125 AMBIENT TEMPERATURE (℃) 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz Power Factor Characteristic Constant Current Mode 1.0 0.9 PF 0.8 0.7 277V 0.6 230V 115V 0.5 0.4 0.3 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (40W) LOAD File Name:NPF-40-SPEC 2015-05-28 NPF-40 40W Single Output Switching Power Supply series EFFICIENCY vs LOAD (48V Model) NPF-40 series possess superior working efficiency that up to 90% can be reached in field applications. 91% 89% 87% EFFICIENCY (%) 85% 277V 230V 115V 83% 81% 79% 77% 75% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method, "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV)" or "constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Vo(%) 100 (B) Constant Current area (A) Constant Voltage area Should there be any compatibility issues, please contact MEAN WELL. 60 (min.) (C) Hiccup Protection 50 100 Io (%) Typical LED power supply I-V curve File Name:NPF-40-SPEC 2015-05-28 NPF-40 40W Single Output Switching Power Supply Mechanical Specification Case No.: NPF-60A series Unit:mm 150 5 5 300±20 300±20 53 AC/L(Brown) AC/N(Blue) SJTW 18AWG×2C ψ4.5 35 +V(Red) -V(Black) 5 13 T case SVT 18AWG×2C 5 3 35 ※T case: Max. Case Temperature Recommend Mounting Direction Installation Manual Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html File Name:NPF-40-SPEC 2015-05-28