DB101(S) - DB107(S) Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers DB Features Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique High temperature soldering guaranteed: o 260 C / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Small size, simple installation High surge current capability DBS .047(1.20) .040(1.02) .205(5.2) .195(5.0) .404(10.3) .386(9.80) .255(6.5) .245(6.2) .335(8.51) .320(8.13) 45 0 .013(0.33) .0088(0.22) .130(3.30) .120(3.05) .060(1.53) .040(1.02) .013(0.33) .003(0.076) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA = 40 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25 oC at Rated DC Blocking Voltage @ TA=125 oC Typical Thermal resistance ( Note 1 ) Operating Temperature Range Symbol VRRM VRMS VDC DB 101 DB 101S DB 102 DB 102S DB 103 DB 103S DB 104 DB 104S DB 105 DB 105S DB 106 DB 106S DB 107 DB 107S Units 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V I(AV) 1.0 A IFSM 50 A VF 1.1 V 10 500 40 15 -55 to +150 -55 to +150 uA uA IR RθJA RθJL TJ Storage Temperature Range TSTG 1. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted Notes: On P.C.B. with 0.2” x 0.2” (5mm x 5mm) Copper Pads. 2. DBS for Surface Mount Package. o C/W o o C C DB101(S) - DB107(S) Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES FIG.1- MAXIMUM DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 .06" (1.5mm) Tj=125 0C PCB Copper Pauls .51" x .51" (13mm x 13mm) 0.5 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 o AMBIENT TEMPERATURE. ( C) 120 140 150 FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 1.0 10 1 0.1 Tj=25 0C 0.01 Single Sine - Wave 50 0 (JEDEC Method) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 40 30 100 FIG.4- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 20 10 0 1 2 4 6 10 20 40 60 NUMBER OF CYCLES AT 60Hz 100 CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (A) 60 Tj=25 0C f=1.0MHz Vsig=50mVp-p 10 FIG.5- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 10 1 INSTANTANEOUS FORWARD CURRENT. (A) 1 1 0.1 0 Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 FORWARD VOLTAGE. (V) 1.4 1.6 10 REVERSE VOLTAGE. (V) 100