MOSPEC MBRF20120C Switchmode Full Plastic Dual Schottky Barrier Power Rectifiers SCHOTTKY BARRIER RECTIFIERS Using the Schottky Barrier principle with a Refractory metal capable of high temperature operation metal.The properietary barrier technology allows for reliable operation up to 175℃ junction temperature. Typical application are in switching Mode Power Supplies such as adaptators, DC/DC convertes,free- wheeling and polarity protection diodes. 20 AMPERES 120 VOLTS Features *Low Forward Voltage. *Low Switching noise. *High Current Capacity *Guarantee Reverse Avalanche. *Guard-Ring for Stress Protection. *Low Power Loss & High efficiency. *175℃ Operating Junction Temperature *Low Stored Charge Majority Carrier Conduction. *Plastic Material used Carries Underwriters Laboratory ITO-220AB Flammability Classification 94V-O * In compliance with EU RoHs 2002/95/EC directives MAXIMUM RATINGS Characteristic Symbol MBRF20120C Unit VRRM VRWM VR 120 V VR(RMS) 84 V IF(AV) 10 20 A Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz) IFM 20 A Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) IFSM 150 A Operating and Storage Junction Temperature Range TJ , TSTG -65 to +175 ℃ Rθ j-c 4.0 ℃/w Symbol MBRF20120C Unit VF 0.90 0.81 V IR 0.01 10 mA Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current ( per diode ) Total Device (Rated VR),TC=125℃ THERMAL RESISTANCES Typical Thermal Resistance junction to case ELECTRIAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage ( perdiode ) ( IF =10 Amp TC = 25℃) ( IF =10 Amp TC = 125℃) Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) DIM A B C D E F G H I J K L M N O P Q R MILLIMETERS MIN MAX 14.90 15.15 13.35 13.55 10.00 10.10 6.55 6.65 2.65 2.75 1.55 1.65 1.15 1.25 0.55 0.65 2.50 2.60 3.00 3.20 1.10 1.20 0.55 0.65 4.40 4.60 1.15 1.25 3.35 3.45 2.65 2.75 3.15 3.25 3.60 3.80 MBRF20120C NSTANTANEOUS FORWARD CURRENT (Amp.) FIG-2 TYPICAL FORWARD CHARACTERISITICS TJ=125℃ TJ=25℃ TJ=75℃ CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) FIG-3 TYPICAL REVERSE CHARACTERISTICS FIG-4 TYPICAL JUNCTION CAPACITANCE TJ=125℃ TJ=75℃ TJ=25℃ PERCENT OF RATED REVERSE VOLTAGE ( ﹪) JUNCTION CAPACITANCE (PF) INSTANTANEOUS REVERSE CURRENT (mA.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 FORWARD CURRENT DERATING CURVE REVERSE VOLTAGE (Volts) PEAK FORWARD SURGE CURRENT (Amp.) FIG-5 PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz 4K-A