Optical Communications Systems™ Datasheet Multi-Rate (2.7 Gbps) Single-Mode 50 km SFP Transceivers SFP-MR27D-LR1 Highlights SFP transceiver Data Rates: 0.1 - 2.7 Gbps Protocols: - Fast Ethernet - 1 Gbps Ethernet - 1 Gbps Fibre Channel - 2 Gbps Fibre Channel - Digital Video - OC-3/STM-1 to OC-48/STM-16 and OC-48 with FEC Single-mode fiber 1310 nm 24 to 50 km Duplex LC connector Digital Diagnostics (SFF-8472) Hot-swap Industrial temperature models available Overview Small Form-Factor Pluggable (SFP) interfaces from MRV Communications provide flexible high speed links in a small industry-standard package. They deliver the deployment options and inventory control that network administrators demand for growing networks. SFPs are designed to Multi-Source Agreement (MSA) standards to ensure network equipment compatibility. They are a perfect addition to MRV ‘s extensive lines of networking equipment. Visit the MRV website at www.mrv.com or contact your nearest authorized MRV Communications dealer for more information. Specifications Overview Data Rate 0.1 - 2.7 Gbps Tx Wavelength 1310 nm Tx Power (Minimum) -2 dBm Tx Disable Yes Rx Wavelength Range 1200 - 1625 nm Rx Sensitivity -27 dBm Rx Saturation -9 dBm Damage Threshold 4 dBm Operating Temperature Range -5 to 70 ºC Operating Temperature Range (TH Models) -40 to 85 ºC Power Consumption 1 Watt 1 Optical Communications Systems™ Datasheet Transmitter Specifications, Optical Parameter Optical Power Symbol Average Launch Power (Tx: Off ) Extinction Ratio Pop Min -2 Max 3 Unit dBm Notes - Poff ER - -45 dBm - 8.2 - dB - Eye Mask - IEEE 802.3ah and SONET/SDH compliant - Jgen tr - - - 160 ps 1 - 160 ps 1 Mean Wavelength tf λ 1280 1335 nm - Spectral Width (20 dB) Δλ - 1 nm - Relative Intensity Noise Reflectance Tolerance RIN rp -12 -120 - dB/Hz dB 2 Optical Jitter Generation Optical Rise Time Optical Fall Time Notes: 1. 2. 0.007 UI 20% - 80% values 1 dB degradation of receiver sensitivity Receiver Specifications, Optical Parameter Symbol Min Max Unit Notes Rsens,low - -27 dBm 1 Receive Power High Rsens,high -9 - dBm 1 Damage Threshold Pin,damage 4 - dBm - λ 1200 1625 nm - RX_r - -27 dB - - -42 - dBm - Receive Power Low Wavelength Maximum Reflectance LOS Assert LOS De-assert - - -28 dBm - LOS Hysteresis - 0.5 - dB - Notes: 1. Measured at 10-10 BER, PRBS 223 -1 for SONET, 10-12 BER, PRBS 27 -1 for Gigabit Ethernet Digital Diagnostics Parameter Range Accuracy Unit Calibration Formula Temperature -5 to 70 ±3 ºC External Tc(C) = Tslope*Tad(16 bit signed twos complement value) + Toffset Temperature (TH) -40 to 85 ±3 ºC External Tc(C) = Tslope*Tad(16 bit signed twos complement value) + Toffset Voltage 0 to Vcc ± 0.1 V External V(Volts) = Vslope*Vad(16 bit unsigned integer) + Voffset Bias Current 0 to 120 ±5 mA External I(mA) = Islope*Iad(16 bit unsigned integer) + Ioffset Tx Power -2 to 3 ±3 dBm External Tx_PWR(μW) = Tx_PWRslope*Tx_PWRad(16 bit unsigned integer) + Tx_PWRoffset Rx Power -27 to -9 ±3 dBm External Rx_PWR(μW) = A0 + A1*x + A2*x^2 + A3*x^3 + A4*x^4 General Operating Parameter Supply Voltage Total Current, -40ºC to -5ºC Total Current, -5ºC to 85ºC Power Supply Noise Rejection Operating Temperature Operating Temperature (TH Models) Storage Temperature Data Rate Notes: 1. 2. Symbol Vcc Icc Icc PSR Top Top Tst DR Min. 3.135 100 -5 -40 -40 0.1 Denotes deviation from MSA 20 Hz to 155 MHz 2 Max. 3.465 500 300 70 85 85 2.7 Unit V mA mA ºC ºC ºC Gbps Notes 1 2 - Optical Communications Systems™ Datasheet Transmitter Specifications, Electical Parameter Symbol Min Max Unit Notes Rin 80 120 Ω - Vin,p-p Vfault 250 1200 mV - TxFault_Fault 2 Vcc V - TxFault_Normal Vnormal Vee Vee+0.5 V - Input Differential Impedence PECL Single Ended Data Input Swing TxDisable_Disable Vd 2 Vcc V - Ven Vee Vee+0.8 V - Parameter Symbol Min Max Unit Notes PECL Single Ended Data Output Swing Vout, p-p 185 800 mV - Data Output Rise Time tr - 175 ps - Data Output Fall Time tf - 175 ps - Symbol Min Max Unit Notes TxDisable_Enable Electrical Output Timing and Electrical Parameter Tx Disable Negate Time t_on - 1 ms - Tx Disable Assert Time t_off - 10 μs - Time to Initialize, Including Reset of Tx Fault t_init - 300 ms - Tx Fault Assert Time t_fault - 100 μs - Tx Disable to Reset t_reset 10 - μs - t_loss_on - 100 μs - LOS Assert Time LOS De-assert Time t_loss_off - 100 μs - Serial ID Clock Rate f_serial_clock - 100 KHz - RX_LOS Voltage (High) RX_LOSH 2 - V - RX_LOS Voltage (Low) RX_LOSL - 0.8 V - LOS Output Voltage-Fault VLOS fault 2 V - VLOSnormal Vee Vcc Vee+0.5 V - VH VL 2 Vcc V - Vee Vee+0.5 V - LOS Output Voltage-Normal MOD_DEF (0:2)-High MOD_DEF (0:2)-Low 3 Optical Communications Systems™ Datasheet Pin Function Notes 1 VeeT TX Ground 2 TX_FAULT Open Collector 3 TX_DISABLE Internally Pulled High 4 MOD_DEF2 Serial Data Input 5 MOD_DEF1 Serial Clock Input 6 MOD_DEF0 Internally Grounded 7 NC Not Connected 8 LOS Open Collector 9 VeeR RX Ground 10 VeeR RX Ground 11 12 VeeR RXD- RX Data Negative 13 RXD+ RX Data Positive 14 VeeR RX Ground 15 VccR RX Power 16 VccT TX Power 17 18 VeeT TXD+ TX Data Positive 19 TXD- TX Data Negative 20 VeeT TX Ground RX Ground TX Ground Outline Drawing Units in mm(inches) 4 Optical Communications Systems™ Datasheet Data Rate (Gbps) Wavelength (nm) Bail Latch Color Distance Range (km) SFP-MR27D-LR1 Multi-Rate (Ethernet, Fibre Channel, SONET, DV) SFP Transceiver with Digital Diagnostics 0.1 - 2.7 1310 Red 24 -50 SFP-MR27D-LR1TH Multi-Rate (Ethernet, Fibre Channel, SONET, DV) SFP Transceiver with Digital Diagnostics, Temperature Hardened 0.1 - 2.7 1310 Red 24 -50 Model Description Ordering Information Regulatory and Industry Compliances Class 1 Laser Product, complies with EN 60825-1 and 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50. dated June 24, 2007 MSA SFF-8074i; Digital Diagnostic SFF-8472 Certified by one or more of the following agencies: TÜV, UL, CSA RoHS Directive; China RoHS; California RoHS Law, REACH Directive SVHC; WEEE Directive The Quality Management System is certified to ISO 9001 by QMI-SAI Global The Environmental Management System is in compliance with ISO 14001 Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic descharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV Los Angeles 20415 Nordhoff Street Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 300 Apollo Drive Chelmsford, MA 01824 800-338-5316 978-674-6800 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100 All statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-OP-SFPMR27DLR1-083110 3020102-001 Rev. A2 Copyright ©2010 MRV Communications, Inc. All Rights Reserved.