Optical Communications Systems™ Datasheet 100 to 155 Mbps Single Fiber Bidirectional 40 km SFP Transceivers SFP-FD-BD35 and SFP-FD-BD53 Highlights SFP transceiver Data Rates: 100 to 155 Mbps Protocols: - Fast Ethernet - OC-3/STM-1 Single-mode fiber Single fiber, bi-directional Two wavelength options: - Tx 1310 nm and Rx 1550 nm - Tx 1550 nm and Rx 1310 nm 16 to 40 km Simplex LC connector Digital Diagnostics (SFF-8472) Hot-swap Industrial temperature models available Overview Small Form-Factor Pluggable (SFP) interfaces from MRV Communications provide flexible high speed links in a small industry standard package. They deliver the deployment options and inventory control that network administrators demand for growing networks. SFPs are designed to Multi-Source Agreement (MSA) standards to ensure network equipment compatibility. They are a perfect addition to MRV ‘s extensive lines of networking equipment. Visit the MRV website at www.mrv.com or contact your nearest authorized MRV Communications dealer for more information. Specifications Overview Data Rate 100 - 155 Mbps Tx Wavelength for SFP-FD-BD35 1310 nm Tx Wavelength for SFP-FD-BD53 1550 nm Tx Power (Minimum) -5 dBm Extinction Ratio 6.6 dBm Tx Disable Yes Rx Wavelength for SFP-FD-BD35 1480 to 1580 nm Rx Wavelength for SFP-FD-BD53 1260 to 1360 nm Rx Sensitivity -28 dBm Rx Saturation -8 dBm Operating Temperature Range -5 to 70 ºC Operating Temperature Range (TH Models) -40 to 85 ºC Damage Threshold 4 dBm Power Consumption 1 Watt 1 Optical Communications Systems™ Datasheet Transmitter Specifications (Optical) Parameter Symbol Min Max Unit Optical Power Pop Optical Crosstalk XT Average Launch Power Of Off Tx Extinction Ratio -5 0 dBm - - -40 dB - Poff - -45 dBm - ER 6.6 - dB - Eye Mask IEEE 802.3Z, SONET/SDH compliant Notes - Optical Rise Time (20% to 80% values) tr - 2 ns - Optical Fall Time (20% to 80% values) tf - 2 ns - Mean Wavelength for SFP-FD-BD35 λ 1260 1360 nm - Mean Wavelength for SFP-FD-BD53 λ 1500 1600 nm - RMS Width (σ) for SFP-FD-BD35 σ - 1 nm - RMS Width (σ) for SFP-FD-BD53 σ - 3 nm RIN - -120 dB/Hz - ORLT - 12 dB - Symbol Min Max Unit Notes Rsens,low/high -28 -8 dBm 1 Pin,damage 4 - dBm - Wavelength for SFP-FD-BD35 λ 1480 1580 nm - Wavelength for SFP-FD-BD53 Relative Intensity Noise Optical Return Loss Tolerance Receiver Specifications (Optical) Parameter Receive Power Damage Threshold λ 1260 1360 nm - LOS Assert - -45 - dBm - LOS De-assert - - -28 dBm - LOS Hysteresis - 0.5 - dB - Notes: 1. Measured at 10-12 BER, PRBS 27-1 Digital Diagnostics Parameter Range Accuracy Unit Calibration Bit Value Formula Temperature -5 to 70 ±3 ºC Internal 1/256 C Tc(C)=Tad(16 bit signed twos complement)/256 Temperature (TH Models) -40 to 85 ±3 ºC Internal 1/256 C Tc(C)=Tad(16 bit signed twos complement)/256 Voltage 0 to Vcc ± 0.1 V Internal 100μV V(Volts)=Vad(16 bit unsigned integer)*0.1 Bias Current 0 to 120 ±5 mA External - I(mA)=Islope*Iad(16 bit unsigned integer)+Ioffset TX Power -5 to 0 ±3 dBm External - TX_PWR(μW)=TX_PWRslope*TX_PWRad(16 bit unsigned integer +TX_PWRoffset RX Power -28 to -8 ±3 dBm External - RX_PWR(μW)=A0+A1*x+A2*x^2+A3*x^3+A4*x^4 2 Optical Communications Systems™ Datasheet General Operations Parameter Supply Voltage Total Current Symbol Min Max Unit Notes Vcc 3.135 3.465 V - Icc - 300 mA - Power Supply Noise Rejection PSR 100 - mVp-p - Operating Temperature of SFP Case Topr -5 70 ºC 1 Operating Temperature (TH Models) Topr -40 85 ºC 1 Storage Temperature Tstg -40 85 ºC - Data Rate DR 100 155 Mbps - Notes: 1. Maximum Relative Humidity is 85%, non-condensing Transmitter Specifications (Electical) Parameter Symbol Min Max Unit Notes Rin 80 120 Ω - PECL Single Ended Data Input Swing Vin,p-p 250 1200 mV - TxFault_Fault Vfault 2 Vcc V - Vnormal Vee Vee+0.5 V - Input Differential Impedence TxFault_Normal TxDisable_Disable Vd 2 Vcc V - Ven Vee Vee+0.8 V - Parameter Symbol Min Max Unit Notes PECL Single Ended Data Output Swing TxDisable_Enable Receiver Specifications (Electrical) Vout, p-p 185 800 mV - Data Output Rise Time tr - 2 ns - Data Output Fall Time tf - 2 ns - Symbol Min Max Unit Notes Electrical Specifications and Timing Parameter Tx Disable Negate Time t_on - 25 ms - Tx Disable Assert Time t_off - 10 μs - Time to Initialize, Including Reset of Tx Fault t_init - 300 ms - Tx Fault Assert Time t_fault - 100 μs - Tx Disable To Reset t_reset 10 - μs - LOS Assert Time t_loss_on - 300 μs - LOS De-assert Time t_loss_off - 100 μs - Serial ID Clock Rate f_serial_clock - 100 KHz - RX_LOS Voltage (High) RX_LOSH 2 - V RX_LOS Voltage (Low) RX_LOSL - 0.8 V - LOS Output Voltage-Fault VLOS fault 2 Vcc V - LOS Output Voltage-Normal VLOSnormal Vee Vee+0.5 V - MOD_DEF (0:2)-High VH 2 Vcc V - MOD_DEF (0:2)-Low VL Vee Vee+0.5 V - 3 Optical Communications Systems™ Datasheet Pin Function Name / Description 1 VeeT Module Transmitter Ground Notes - 2 TX_FAULT Open Collector - 3 TX_DISABLE Internally Pulled High - 4 MOD_DEF2 Serial Data Input - 5 MOD_DEF1 Serial Clock Input - 6 MOD_DEF0 Internally Grounded - 7 NC Not Connected - 8 LOS Open Collector - 9 VeeR Module Receiver Ground - 10 VeeR Module Receiver Ground - 11 VeeR Module Receiver Ground - 12 RXD- Receiver Data Negative - 13 RXD+ Receiver Data Positive - 14 VeeR Module Receiver Ground - 15 VccR Module Receiver Power Supply - 16 VccT Module Transmitter Power Supply - 17 VeeT Module Transmitter Ground - 18 TXD+ Transmitter Data Positive - 19 TXD- Transmitter Data Negative - 20 VeeT Module Transmitter Ground - Outline Drawing Units in mm 4 Optical Communications Systems™ Datasheet Model Description Data Rate (Mbps) Tx Rx Connector Type Digital Diagnostics Bail Latch Color Distance Range (km) Wavelength (nm) Ordering Information SFP-FD-BD35 SFP Bidirectional Transceiver 100 - 155 1310 1490 LC Yes Blue 16 - 40 SFP-FD-BD53 SFP Bidirectional Transceiver 100 - 155 1490 1310 LC Yes Yellow 16 - 40 100 - 155 1310 1490 LC Yes Blue 16 - 40 100 - 155 1490 1310 LC Yes Yellow 16 - 40 SFP-FD-BD35TH SFP-FD-BD53TH SFP Bidirectional Transceiver (Temperature Hardened) SFP Bidirectional Transceiver (Temperature Hardened) Regulatory and Industry Compliances Class 1 Laser Product, complies with EN 60825-1 and 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50. dated June 24, 2007 MSA SFF-8074i; Telcordia GR-468, Digital Diagnostic SFF-8472; Certified by one or more of the following agencies: TÜV, UL, CSA RoHS Directive; China RoHS; California RoHS Law, REACH Directive SVHC; WEEE Directive The Quality Management System is certified to ISO 9001 by QMI-SAI Global The Environmental Management System is in compliance with ISO 14001 Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic descharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV Los Angeles 20415 Nordhoff Street Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 300 Apollo Drive Chelmsford, MA 01824 800-338-5316 978-674-6800 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100 All statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-OP-SFPFDBD3553-071310 3020055-001 Rev. A2 Copyright ©2010 MRV Communications, Inc. All Rights Reserved.