Datasheet LambdaDriver® 10 Gbps Transponder Module (TM-DXFP) Features 10 Gbps LAN or WAN transport Full 3R support Remote and Local Loop-back testing 50GHz spacing ITU-grid(G.694.1) DWDM Trunk Dispersion tolerance up to 200 km XFP digital diagnostics Link Integrity notification (LIN) Y-Cable protection support Automatic Laser Shutdown (ALS) Hot swappable Applications 10 GE or SDH/SONET distance extension and repeaters 10Gbps signal regeneration and optical wavelength conversion 10Gbps transponder Data rate upgrade of existing DWDM networks to 10 Gbps Overview The TM-DXFP transponder is a single slot module that converts the “gray” wavelength of a 10 Gbps terminal equipment interface to an ITU-T grid DWDM wavelength enabling its transport via the LambdaDriver® Optical Transport System (DWDM multiplexer, OADM etc.) The TM-DXFP module supports OC-192/STM64 and 10 GbE protocols with 3R signal conditioning. The access (terminal equipment) interface is an XFP (10 Gbps Small Form Factor Pluggables receptacle), while the trunk (DWDM) port is an integrated 50GHz tunable DWDM interface. Automatic Laser Shutdown (ALS) feature automatically reduces the optical power of the transmitters to an eye safe level in case of a broken link. The ALS feature is implemented on both ports of the transponders (DWDM side and Terminal equipment side). Remote and Local Loop-back functionality is supported and serves as an invaluable tool for troubleshooting and maintenance operations in a live network. The Link Integrity Notification (LIN) function allows the terminal equipment to detect the link failure in the path between the two terminal equipment units, regardless of the location of the failure. The TM-DXFP transponders provide power monitoring of the trunk (DWDM) port in addition to Digital Diagnostics provided by the XFP of the access port. The TM-DXFP transponders also support the Y-Cable based fast switch-over protection protocol. In this protection mode two adjacent transponders in a LambdaDriver® chassis run a protocol that maintains “operational” and “standby” transponders for a single 10Gbps port of an access device. The modules are manageable with the LambdaDriver management module either locally using RS232 CLI access or remotely using Telnet in SNMP, for example, with MRV’s MegaVision Pro NMS. LD800 LD800 LD400 LD400 Dispersion Compensation Module 10 Gbps transponder 10 Gbps transponder 10 GE Switch DWDM MUX 80 Km 10 Gbps Repeater 80 Km D C M IN LINE OA 10 Gbps transponder 80 Km 10 Gbps transponder DWDM MUX 10 Gbps transponder 10 Gbps transponder STM 64/OC192 Terminal Long haul transport of 10 Gbps protocols Optical Amplifier 10Gbps tranponder Not sure what solution best suits your needs? Visit www.mrv.com or e-mail us at [email protected] Environmental Operating Temperature Storage Temperature Relative Humidity Dimensions (W x H x D) - 5 to 45 oC (23 oF to 113 oF) -10 to 70 oC (14 oF to 158 oF) 85% maximum, non-condensing 26.93 x 130.7 x 227 mm (1.06 x 5.145 x 8.93 in) Weight 0.700 kg (1.54 lb) Connector Mini SC (MU) - WDM port; XFP access port Power consumption Module 15.3W XFP 3.5W Technical Specifications Order Info WDM TX power (dBm) Maximum receiver sensitivity (dBm) Overload (dBm) DWDM wavelengths range Wavelengths Accuracy Wavelengths Tuning Time - cold start (sec) Wavelengths Tuning Time - warmed - up (sec) Chromatic Dispersion tolerance at 1525nm - 1570nm Dispersion penalty at limit (dB) Product TM-DXFP8T 4 -7 -24 -8 1528 - 1561nm on ITU-T G694.1 50Ghz grid +/-10pm 30 0.5 1600 ps/nm 2 Description 10Gbps DWDM tunable wavelength transponder up to 80 Km distance, XFP Access port. MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV (West Coast USA) 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV (East Coast USA) 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV (International) Bussiness Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax. (49) 6105/207-100 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV- LD-10G Rev.8 11 -11 Copyright ©2011 MRV Communications, Inc. All Rights Reserved.