134 RLP 5 www.vishay.com Vishay BCcomponents Aluminum Capacitors Radial Low Profile, 5 mm FEATURES • Useful life: 1500 h at 85 °C • Very low profile, 5 mm height • Extremely miniaturized • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, insulated with a blue sleeve • Charge and discharge proof 038 RSU 097 RLP 7 higher CV-values 134 RLP 5 5 mm • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 longer life SMD 153 CRV APPLICATIONS Fig. 1 • General purpose, industrial, automotive and audio-video • Coupling, decoupling, smoothing, filtering and timing • High mounting density QUICK REFERENCE DATA DESCRIPTION • Portable and mobile equipment (very small size and very low mass), low profile equipment VALUE Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR 4 x 5 to 6.3 x 5 1.0 μF to 100 μF MARKING ± 20 % Rated voltage range, UR The capacitors are marked (where possible) with the following information: 6.3 V to 50 V Category temperature range - 40 °C to + 85 °C Endurance test at 85 °C 1000 h Useful life at 85 °C 1500 h Useful life at 40 °C, 1.4 x IR applied Shelf life at 0 V, 85 °C • Rated capacitance (in μF) • Rated voltage (in V) • Negative terminal identification 40 000 h • Code indicating factory of origin 500 h Based on sectional specification Climatic category IEC 60068 • Name of manufacturer IEC 60384-4/EN 130300 • Date code, in accordance with IEC 60062 40/085/56 • Series number (134) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 6.3 10 16 25 35 50 1.0 - - - - - 4x5 2.2 - - - - - 4x5 3.3 - - - - - 4x5 4.7 - - - - 4x5 5x5 10 - - 4x5 - 5x5 6.3 x 5 22 4x5 - 5x5 - 6.3 x 5 - 33 - 5x5 - 6.3 x 5 - - 47 5x5 - 6.3 x 5 - - - 100 6.3 x 5 - - - - - Revision: 12-Apr-13 Document Number: 28307 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 134 RLP 5 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD L + F ± 0.5 15 min 5 min Ød Case Ø D = 4 mm to 6.3 mm; pitch F = 5 mm Fig. 2 - Form CA: Long leads Fig. 3 - Form TFA: Taped in box (ammopack) Pitch F = 2.5 mm Case Ø D = 4 mm to 6.3 mm Fig. 4 - Form TNA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters AND PACKAGING QUANTITIES PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F FORM CA FORM TFA FORM TNA 4x5 53 0.45 4.5 6.0 1.5 ± 0.5 2000 2000 2000 5x5 54 0.45 5.5 6.0 2.0 ± 0.5 2000 2000 2000 6.3 x 5 55 0.45 6.8 6.0 2.5 ± 0.5 2000 2000 2 000 Note • For detailed tape dimensions please see www.vishay.com/doc?28360 Revision: 12-Apr-13 Document Number: 28307 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 134 RLP 5 www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA Electrolytic capacitor 134 series SYMBOL DESCRIPTION CR Rated capacitance at 120 Hz, tolerance ± 20 % 22 μF/16 V; ± 20 % IR Rated RMS ripple current at 120 Hz, 85 °C Nominal case size: Ø 5 mm x 5 mm; form TFA Max. leakage current after 2 min at UR Ordering code: MAL213435229E3 Max. dissipation factor at 120 Hz Former 12NC: 2222 134 35229 IL2 tan Z Max. impedance at 100 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) IR 120 Hz 85 °C (mA) IL2 2 min (μA) 22 4x5 23 3 0.24 11 53229E3 1.5 33229E3 5.0 73229E3 2.5 47 5x5 38 3 0.24 5.2 53479E3 2.0 33479E3 5.0 73479E3 2.5 100 6.3 x 5 60 7 0.24 3.4 53101E3 2.5 33101E3 5.0 73101E3 2.5 33 5x5 35 4 0.20 6.0 54339E3 2.0 34339E3 5.0 74339E3 2.5 10 4x5 20 3 0.16 12 95105E3 1.5 95103E3 5.0 95107E3 2.5 CR 120 Hz (μF) 6.3 10 16 25 35 50 ORDERING CODE MAL2134....... NOMINAL CASE SIZE ØDxL (mm) tan 120 Hz Z 100 kHz () BULK LONG LEADS FORM CA F (mm) TAPED AMMOPACK FORM TFA F (mm) FORM TNA F (mm) 22 5x5 32 4 0.16 6.4 55229E3 2.0 35229E3 5.0 75229E3 2.5 47 6.3 x 5 50 8 0.16 4.2 55479E3 2.5 35479E3 5.0 75479E3 2.5 33 6.3 x 5 45 9 0.14 4.6 56339E3 2.5 36339E3 5.0 76339E3 2.5 4.7 4x5 15 3 0.12 27 50478E3 1.5 30478E3 5.0 70478E3 2.5 10 5x5 25 4 0.12 17 50109E3 2.0 30109E3 5.0 70109E3 2.5 22 6.3 x 5 40 8 0.12 11 50229E3 2.5 30229E3 5.0 70229E3 2.5 1.0 4x5 7.5 3 0.10 28 91105E3 1.5 91103E3 5.0 91107E3 2.5 2.2 4x5 12 3 0.10 26 91225E3 1.5 91223E3 5.0 91227E3 2.5 3.3 4x5 14 3 0.10 25 51338E3 1.5 31338E3 5.0 71338E3 2.5 4.7 5x5 19 3 0.10 22 51478E3 2.0 31478E3 5.0 71478E3 2.5 10 6.3 x 5 29 5 0.10 14 51109E3 2.5 31109E3 5.0 71109E3 2.5 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us 1.15 x UR Surge voltage Urev 1 V Reverse voltage Current Leakage current After 2 min at UR IL2 0.01 CR x UR or 3 μA (whichever is greater) Calculated from tan max. and CR (see Table 3) ESR = tan /2 f CR Resistance Equivalent series resistance (ESR) Revision: 12-Apr-13 Document Number: 28307 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 134 RLP 5 www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE CCC205 3.3 IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 Lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 0 4. 6 1.6 .0 10 1.4 15 30 70 40 (1) (1) 50 IA = Actual ripple current at 120 Hz IR = Rated ripple current at 120 Hz, 85 °C 20 1.2 1.0 0.8 0.5 0.0 50 60 70 80 90 100 Tamb (°C) Useful life at 85 °C and IR applied: 1500 h Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) IR MULTIPLIER 50 0.60 120 1.00 400 1.20 800 1.30 2000 1.40 Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN 130300, subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 85 °C; UR applied; 1000 h C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 85 °C; UR and IR applied; 1500 h C/C: ± 50 % tan 3 x spec. limit Z 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 3 % Shelf life (storage at high temperature) IEC 60384-4/ EN 130300, subclause 4.17 Tamb = 85 °C; no voltage applied; 500 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C, tan , Z: For requirements see “Endurance test” above IL2 spec. limit Revision: 12-Apr-13 Document Number: 28307 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000