Optoway SPS-2110WG 1 *********************************************************************************************************************************************************************** SPS-2110WG / SPS-2110BWG / SPS-2110AWG (RoHS Compliant) 10 Gb/s / 10 km / 1310 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l l l l l l l l The SPS-2110WG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a 1310 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. Up to 10.5 Gb/s Bi-directional Data Links Complaint with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-LR Compliant to IEEE 802.3ae 10GBASE-LW SFF-8472 Digital Diagnostic Function 1310 nm DFB LD Transmitter AC/AC Coupling according to MSA Distance up to 10 km at SM Fiber Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operating: SPS-2110WG -10 to 85oC Operating: SPS-2110BWG -40 to 85oC Operating: SPS-2110AWG Class 1 Laser International Safety Standard IEC-60825 Compliant LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l High-speed Storage Area Networks l Computer Cluster Cross-connect l Custom High-speed Data Pipes ORDER INFORMATION P/No. SPS-2110WG SPS-2110BWG SPS-2110AWG Bit Rate (Gb/s) 10GBASE Distance (km) Wavelength (nm) Package Temp. (oC) RoHS Compliant 10.3 10.3 LR / LW LR / LW 10 10 1310 DFB 1310 DFB SFP+ with DMI SFP+ with DMI 0 to 70 -10 to 85 Yes Yes 10.3 LR / LW 10 1310 DFB SFP+ with DMI -40 to 85 Yes Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage Symbol Tstg Topr Vcc Min -40 0 -10 -40 -0.5 Max 85 70 85 85 3.6 Units o C o C Notes SPS-2110WG SPS-2110BWG SPS-2110AWG V Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Data Rate Symbol Vcc Topr Min 3.13 0 -10 -40 ICC (TX+RX) Typ 3.3 260 10.3125 Max 3.47 70 85 85 330 10.5 Units / Notes V o C / SPS-2110WG o C / SPS-2110BWG o C / SPS-2110AWG mA Gb/s *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway SPS-2110WG 2 *********************************************************************************************************************************************************************** Transmitter Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Optical Modulation Amplitude Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, Avg Po, OMA λc σλ SMSR ER RIN Min -8 -5.2 1270 Typ Max 0.5 1310 1355 1 30 3.5 -128 -30 Units dBm dBm nm nm dB Notes 1 -20 dB width dB/Hz dBm 1. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Sensitivity Sensitivity in OMA Stress Sensitivity in OMA Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Optical Return Loss Symbol Sen1 Sen1 Sen2 PMAX LOSD LOSA λc ORL Min 0.5 ---28 1260 Typ -16 --1565 -12 Units dBm dBm dBm dBm dBm dBm nm dB Typ Max Units 10.3125 100 10.5 700 Gb/s Ω mVpp Gb/s Ω mVpp Vcc+0.3 0.8 Vcc 0.5 V V V V --------- Max -14.4 -12.6 -10.3 Notes 2, average received power 2 3 Transition: low to high Transition: high to low 2. Measured with worst ER; BER < 10-12 and PRBS 231-1 at 10.3125 Gb/s.. 3. Per IEEE 802.3ae. Equivalent to -13.3 dBm average power at Infinite ER. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min 150 400 10.3125 100 600 2.0 GND 2.4 GND 1200 10.5 Notes Internally AC coupled Internally AC coupled ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway SPS-2110WG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 7 MOD-ABS RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power – 3.3V±5% 16 17 VCCT VEET Transmitter Power – 3.3V±5% Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition PIN 4 PIN 5 PIN 6 Interpretation by Host 4 SDA SCL MOD-ABS Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway SPS-2110WG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT (1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 KΩ TD + LD Driver 18 TD + Z=50Ω 100Ω TD - 19 TD Z=50Ω Vcc T 4 .7 μH 16 Vcc 3.3V 0.1μF 22 μF 0.1μF SerDes IC 0.1μF Vcc R 15 0.1μF RD - 22 μF 4 .7 μH 12 Protocol IC RD Z=50Ω 100Ω POST Amp RD + 13 RD + Z=50Ω depending on SERDES 10 KΩ LOS Vee R 30KΩ 8 RS1 9 RS0 7 30KΩ MOD_ABS EEPROM SCL SDA LOSS OF SINGAL (10,11,14) TX Rate Select RX Rate Select 6 MODULE DETECT 5 SCL 4 SDA 10 KΩ SFP+ module 10 KΩ 10 KΩ Vcc 3.3V PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway SPS-2110WG 5 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 2.0 Subject Release Date Initial datasheet Add SPS-2110AWG for -40 to 85oC 2007/10/1 2007/12/1 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2007/12/1 V2.0