Optoway PDA-1300-3 **************************************************************************************************************************************************************** PDA-1300-3 3 GHz InGaAs PIN Photodiode Module for CATV/Wireless/SAT Receiver **************************************************************************************************************************************************************** DESCRIPTION PDA-1300-3 InGaAs PIN Photodiode series are high quality 3 GHz analog photodetectors designed for CATV, CDMA / W-CDMA, and Satellite receiver applications. These coaxial modules are optically aligned to optimize performance and balance the parameters of responsivity, distortion and back reflection. FEATURES Electro-Optical z Low Inter-modulation Distortion z High Responsivity z Low Back Reflection Packaging z Single mode 900 μm fiber with or without a connector z Single mode 250 μm fiber with or without a connector ABSOLUTE MAXIMUM RATINGS Stress in excess of the absolute maximum rating can cause permanent damage to the device. These are absolute stress rating only. Functional operation of the device is not implied at these or any other conditions in excess of these given in the operational sections of the datasheet. Exposure to absolute ratings for extended periods can adversely affect device reliability. Parameter Forward Current Reverse Current Reverse Voltage Power Dissipation Soldering Temperature Operating Temperature Range Storage Temperature Range Symbol PDISS Tsolder Top Tstg Min Max Unit -40 -40 10 10 25 100 260/10 85 85 mA mA V mW o C/sec o C o C CHARACTERISTICS ELECTRICAL AND OPTICAL CHARACTERISTICS (TC = 25ºC, VR = 12V) Symbol R Parameter Test Conditions Responsivity λ= 1300nm 0.8 λ= 1550nm 0.85 nd Min. Typ. Max. Unit A/W Note (1*) -70 dBc BR 2 Order Intermodulation Modulation Back Reflection λ= 1550 nm -40 dB Idark Dark Current VR=5V 1 nA C Capacitance f=1MHz, Case Ground, VR=5V 0.8 pF IM2 BW Bandwidth 3 dB down, RL=50Ω 3.0 1.0 Fiber Length GHz 1.5 m 1*. IM2 measured at VR=12V, λ=1550nm, Pavg=0dBm, MI=0.7, RLOAD=50 ohm, f1=400 MHz, f2=450MHz **************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 4/9/2009 V2.0 Optoway PDA-1300-3 **************************************************************************************************************************************************************** PRECAUTIONS for USE ESD protection is imperative. Use of grounding straps, anti-static mats, and other ESD protective equipment is recommended when handling or testing an InGaAs PIN or any other junction photodiodes. Fiber pigtails should be handled with less than 10N pull and with a bending radius greater than 30 mm. MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: 1. Specifications subject to change without notice. 2. Other PIN assignment is available upon request. ORDER INFORMATION Part No.: P D A − Code 0 1 1 3 0 Fiber Buffer 900 μm 250 μm □ − 3 − □ □ □ Code Flange V Vertical H Horizontal X No Flange Code X SA FA Connector Type No Connector SC/APC FC/APC **************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 4/9/2009 V2.0 Optoway PDA-1300-3 **************************************************************************************************************************************************************** Revision History Version 1.0 2.0 Subject Release Date Initial datasheet Modify mechanical dimension 2007/1/1 2009/4/9 **************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 4/9/2009 V2.0