KSK-1A71/6-... MEDER electronic DIMENSIONS CHARACTERISTICS ø0.5 [0.019] ø2.8 [0.110] All dimensions in mm [inches] • • • • 16.5 [0.650] 22.05 [0.868] Glass length of 16.5 mm and diameter of 2.8 mm Normally open 1 Form A contact Carry current up to 1 A 300 VAC breakdown voltage 44.1 [1.736] Switch Model → Contact Form → All Data at 20 oC Contact Ratings Conditions CONTACT DATA KSK-1A71/6-... Form A Max. Units Switching Power * Any combination of V and A not to exceed their individual max.’s Min. Typ. 10 W Switching Voltage DC 320 VDC Switching Voltage AC 230 VAC Switching Current DC or peak AC 0.4 A Carry Current DC or peak AC 1.0 A Static Contact Resistance at 0.5 V & 10 mA 100 mΩ Dynamic Contact Resistance measured w/ 0.5 V & 50 mA, 1.5 ms after closure 200 mΩ Insulation Resistance cross Contacts 100 Volts applied Breakdown Voltage > 60 sec. Operate Time incl. Bounce 40 % overdrive 0.8 ms Release Time measured with/ no coil excitation 0.05 ms Capacitance at 10 kHz across contact 1 GΩ 300 VAC 0.3 Test Coil pF KMS-01 Standard AT range 15 60 AT g Environmental Data Shock Resistance 1/2 sine wave for 11 ms 50 Vibration Resistance 10 - 2000 Hz 20 Ambient Temperature max. 10 C / minute allowance -20 Stock Temperature max. 10 oC / minute allowance -55 Soldering Temperature 5 sec. dwell o g 130 o C 130 o C 260 o C Note: The indicated electric data are maximum values can vary downwards when using a more sensitive switch. * For life expectancy, please see the “Life Requirements” section. ORDER INFORMATION Series Contact Form Switch Model AT Range (between) KSK - 1A 71/6 - xxxx Options Part Number Example - KSK - 1A71/6 - 2030 2030 is the pull in AT range (Any AT can be ordered between 15 & 60 in a minimum range of +/-2 AT) 15 -60 www.meder.com 114