Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSP Series FEATURES • NEW “X”, “Y”, "Z", "U" & "V" TYPE HIGH RIPPLE CURRENT/VERY LOW ESR • REPLACES MULTIPLE TANTALUM CHIPS IN HIGH EXTENDED LOAD LIFE CURRENT POWER SUPPLIES AND VOLTAGE REGULATORS HIGH RIPPLE CURRENT • FITS EIA (7343) “D” AND “E” TANTALUM CHIP LAND PATTERNS • Pb-FREE AND COMPATIBLE WITH REFLOW SOLDERING ULTRA LOW ESR CHARACTERISTICS (Note 1) 2.0 ~ 6.3VDC 68 ~ 560µF -55 ~ +105°C ± 20% (M) Rated Working Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current (µA) After 2 Minutes (+20°C) Max. Tan δ, 120Hz, +20°C High Temperature Load Life 2,000 Hours @ 105°C at Rated Working Voltage LOW ESR COMPONENT SOLID POLYMER ELECTROLYTE For Performance Data see www.LowESR.com All Case Sizes See Standard Products and Specifications Tables Capacitance Change Within ±20% of initial measured value Less than 200% specified max. value Tan δ Leakage Current Less than 300% specified max. value 6.3V Within -20%/+50% of initial measured value Capacitance Change 4V Within -20%/+60% of initial measured value Damp Heat Test 2V, 2.5V Within -20%/+70% of initial measured value 500 Hours @ +60°C at 90% RH Less than 200% of specified max. value Tan δ Leakage Current Less than specified max. value Note 1: Specifications that apply to "Not Recommended" parts begin on page 5. STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number NSP181M2D6ZATRF NSP221M2D6ATRF NSP221M2D6ZATRF NSP221M2DYATRF NSP221M2DUATRF NSP221M2D5YATRF NSP271M2D6XATRF NSP271M2D6ZATRF NSP271M2D6YATRF NSP271M2D6UATRF NSP331M2D6ATRF NSP331M2D6XATRF NSP331M2D6ZATRF NSP331M2D1YATRF NSP331M2D6YATRF NSP331M2D6UATRF NSP331M2D6VATRF NSP391M2D6ATRF NSP391M2D6ZATRF NSP391M2D6YATRF NSP391M2D6UATRF NSP471M2D6ATRF NSP471M2D6ZATRF NSP471M2D6YATRF NSP471M2D6UATRF NSP471M2D6VATRF NSP561M2D6ATRF NSP561M2D6UATRF NSP561M2D6VATRF NSP151M2.5D6ZATRF NSP181M2.5D6ZATRF NSP181M2.5DYATRF NSP181M2.5DUATRF NSP181M2.5D5YATRF 1 WV Cap. (Vdc) (µF) 180 220 220 220 220 220 270 270 270 270 330 330 330 330 2.0 330 330 330 390 390 390 390 470 470 470 470 470 560 560 560 150 180 2.5 180 180 180 Max. LC (µA) 36.0 44.0 44.0 44.0 44.0 44.0 54.0 54.0 54.0 54.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 78.0 78.0 78.0 78.0 94.0 94.0 94.0 94.0 94.0 112.0 112.0 112.0 37.5 45.0 45.0 45.0 45.0 Tan δ 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 NIC COMPONENTS CORP. www.niccomp.com Max. Ripple Current Max. ESR +45°C & 100KHz (mArms) +20°C & 100KHz (Ω) 6,300 0.009 5,100 0.015 6,300 0.009 7500 0.006 8500 0.0045 7500 0.006 5,600 0.012 6,300 0.009 7,500 0.006 8,500 0.0045 5,100 0.015 5,600 0.012 6,300 0.009 7,500 0.006 7,500 0.006 8,500 0.0045 10,200 0.003 5,100 0.015 6,300 0.009 7,500 0.006 8,500 0.0045 5,100 0.015 6,300 0.009 7,500 0.006 8,500 0.0045 10,200 0.003 5,100 0.015 8,500 0.0045 10,200 0.003 6,300 0.009 6,300 0.009 7500 0.006 8500 0.0045 7500 0.006 www.lowESR.com Height H 1.9±0.1 1.9±0.1 1.9±0.1 1.0 max. 1.0 max. 1.1±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.4±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.0 max. 1.0 max. 1.1±0.1 www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSP Series STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number NSP221M2.5D6ATRF NSP221M2.5D6ZATRF NSP221M2.5D6YATRF NSP271M2.5D6YATRF NSP271M2.5D1YATRF NSP331M2.5D6ATRF NSP331M2.5D6ZATRF NSP331M2.5D6YATRF NSP331M2.5D6UATRF NSP391M2.5D6ATRF NSP391M2.5D6ZATRF NSP391M2.5D6YATRF NSP391M2.5D6UATRF NSP471M2.5D6ATRF NSP471M2.5D6ZATRF NSP471M2.5D6YATRF NSP471M2.5D6UATRF NSP471M2.5D6VATRF NSP820M4D6ZATRF NSP101M4D6ZATRF NSP121M4D5ATRF NSP121M4DZATRF NSP151M4D6ATRF NSP151M4D6ZATRF NSP151M4D6YATRF NSP181M4D1ATRF NSP181M4D6ATRF NSP181M4D6XATRF NSP181M4D6ZATRF NSP221M4D6ATRF NSP221M4D6XATRF NSP221M4D6ZATRF NSP271M4D6ATRF NSP271M4D6ZATRF NSP331M4D6ATRF NSP680M6.3D5ATRF NSP680M6.3DZATRF NSP101M6.3D1ATRF NSP101M6.3D6ATRF NSP121M6.3D6ATRF NSP121M6.3D6ZATRF NSP151M6.3D6ATRF NSP151M6.3D6XATRF NSP151M6.3D6ZATRF NSP181M6.3D6ATRF NSP181M6.3D6ZATRF NSP221M6.3D6ATRF WV Cap. (Vdc) (µF) 220 220 220 270 270 330 330 330 330 2.5 390 390 390 390 470 470 470 470 470 82 100 120 120 150 150 150 180 4.0 180 180 180 220 220 220 270 270 330 68 68 100 100 120 120 6.3 150 150 150 180 180 220 Max. LC (µA) 55.0 55.0 55.0 67.5 67.5 82.5 82.5 82.5 82.5 97.5 97.5 97.5 97.5 117.5 117.5 117.5 117.5 117.5 32.8 40.0 48.0 48.0 60.0 60.0 60.0 72.0 72.0 72.0 72.0 88.0 88.0 88.0 108.0 108.0 132.0 42.8 42.8 63.0 63.0 75.6 75.6 94.5 94.5 94.5 113.4 113.4 138.0 Tan δ 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 Max. Ripple Current Max. ESR +45°C & 100KHz (mArms) +20°C & 100KHz (Ω) 5,100 0.015 6,300 0.009 7,000 0.007 7,000 0.007 7,500 0.006 5,100 0.015 6,300 0.009 7,500 0.006 8,500 0.0045 5,100 0.015 6,300 0.009 7,500 0.006 8,500 0.0045 5,100 0.015 6,300 0.009 7,500 0.006 8,500 0.0045 10,200 0.003 6,300 0.009 6,300 0.009 5100 0.015 6,300 0.009 5,100 0.015 6,300 0.009 7,000 0.007 5,100 0.015 5,100 0.015 5,600 0.012 6,300 0.009 5,100 0.015 5,600 0.012 6,300 0.009 5,100 0.015 6,300 0.009 5,100 0.015 5,100 0.015 6,300 0.009 5,100 0.015 5,100 0.015 5,100 0.015 7,000 0.007 5,100 0.015 5,600 0.012 6,300 0.009 5,100 0.015 6,300 0.009 5,100 0.015 Height H 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.4±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.1±0.1 1.0 max. 1.9±0.1 1.9±0.1 1.9±0.1 1.4±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.1±0.1 1.0 max. 1.4±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 1.9±0.1 RIPPLE CURRENT TEMPERATURE CORRECTION FACTORS Case Code All < +45°C 1.0 >+45°C ~ <+85°C 0.7 >+85°C ~ +105°C 0.25 PART NUMBERING SYSTEM NSP 151 M 6.3 D6 Z A TR 500 F Series 2 NIC COMPONENTS CORP. www.niccomp.com RoHS Compliant 500 = 500 piece reel Tape and Reel Peak Reflow Temperature Code (A = +260°C) Optional Performance Code Case Size Code (D, D1, D5, D6) Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in μF, first 2 digits are significant, third digits no. of zeros www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors RECOMMENDED 260°C REFLOW SOLDERING PROFILE NSP Series RECOMMENDED LAND PATTERNS (mm) Case Code D, D1, D5, D6 10 Seconds Max. A 2.8 B 4.0 C 8.8 COMPONENT SURFACE TEMP. (oC) 260oC Max. 250 A 230 200 B 150 150oC ~ 200°C PREHEAT C Time above 230°C Please note the NSP series will fit on standard “D” and “E” size (7343) tantalum chip capacitor land patterns 100 NATURAL COOLING 120 Seconds 50 Time (Seconds) DURATION ABOVE 230°C (FOR 260°C REFLOW PARTS) If Peak Soldering Temperature is 260°C, 10 seconds max. 255°C, 10 seconds max. 250°C, 10 seconds max. Maximum Time Above +230°C is 40 seconds 50 seconds 60 seconds Notes: 1. SAC alloy (+217°C) reflow soldering compatible 2. Soldering heat limits apply to the top surface of component 3. If you have concerns about your reflow soldering profile review them with NIC to insure compatible [[email protected]] 4. Two passes through the reflow process are allowed (cooling down period between process). DIMENSIONS (mm) Case Code D, D1, D5, D6 L ±0.2 7.3 W ±0.2 4.3 H see values table W1 ±0.1 2.4 VOLTAGE CODES S ±0.3 1.3 Voltage 2.0Vdc 2.5Vdc 4.0Vdc 6.3Vdc W1 Code d e g j S L H W Date Code PART MARKING Capacitance (μF) 100 64721 Voltage Code J Anode Polarity Indicator PRECAUTIONS Please review the notes on correct use, safety and precautions found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSP Series CARRIER Tape Dimensions (mm) t±0.2 Case W±0.3 A±0.2 B±0.2 E±0.1 F±0.1 Po±0.1 P1±0.1 Dφ Code D, D5 D1, D6 +0.1 D, D1, D5, D6 7.6 4.5 1.5 5.50 1.75 4.0 8.0 1.5 2.4 12.0 Reel Dimensions (mm) A±2.0 330 B±1.0 80 C±0.5 13.0 D±0.8 21.0 E±0.5 2.0 T±1.0 20.0 t 3.0 W±1.0 14 T E C B A NIC COMPONENTS CORP. www.niccomp.com Reel Quantity 3,500 D R:1.0 4 Case Code D, D1, D5, D6 www.lowESR.com W t www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSP Series Not Recommended for New Designs Note: The following parts are supported but not recommended for new designs FEATURES • PERFORMANCE CODES “X”, “Y” & "Z" (HIGH RIPPLE CURRENT/LOW ESR) • REPLACES MULTIPLE TANTALUM CHIPS IN HIGH EXTENDED LOAD LIFE CURRENT POWER SUPPLIES AND VOLTAGE REGULATORS HIGH RIPPLE CURRENT • FITS EIA (7343) “D” AND “E” TANTALUM CHIP LAND PATTERNS • Pb-FREE AND COMPATIBLE WITH REFLOW SOLDERING ULTRA LOW ESR CHARACTERISTICS Rated Working Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current (µA) After 2 Minutes (+20°C) Max. Tan δ, 120Hz, +20°C High Temperature Load Life 1,000 Hours @ 105°C at Rated Working Voltage Damp Heat Test 500 Hours @ +60°C at 90 ~ 95% RH and Rated Working Voltage 2.0 ~ 16VDC 2.2 ~ 560µF -40 ~ +105°C ± 20% (M) Capacitance Change Tan δ Leakage Current 8V ~ 16V 6.3V Capacitance Change 4V 2V, 2.5V Tan δ Leakage Current NSP 151 M 6.3 D4 X A TR F 5 See Standard Products and Specifications Tables All Case Sizes PART NUMBERING SYSTEM Series LOW ESR COMPONENT SOLID POLYMER ELECTROLYTE For Performance Data see www.LowESR.com RoHS Compliant Tape and Reel Peak Reflow Temperature Code (A = +260°C, No Code = +240°C) Optional Performance Code Case Size Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in μF, first 2 digits are significant, third digits no. of zeros NIC COMPONENTS CORP. www.niccomp.com Within ±10% of initial measured value Less than specified max. value Less than specified max. value Within -20%/+40% of initial measured value Within -20%/+50% of initial measured value Within -20%/+60% of initial measured value Within -20%/+70% of initial measured value Less than 200% of specified max. value Less than specified max. value www.lowESR.com TERMINATION MATERIAL: D2 - D5, D3X, D4X Sizes Base: Fe (~ 100µm) Under Plating: Cu (~ 5µm) Finish Plating: Sn (5 ~ 9µm) D4Z Sizes Base: Cu (~ 105µm) Finish Plating: Sn (5 ~ 9µm) www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSP Series Not Recommended for New Designs Note: The following parts are supported but not recommended for new designs NIC Part Number (Reflow 240°C) NIC Part Number (Reflow 260°C) NSP680M2D5TRF N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A NSP560M2.5D5TRF N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A NSP390M4D5TRF NSP470M4D5TRF N/A N/A N/A N/A NSP101M2D2ATRF NSP101M2D2XATRF NSP101M2D2ZATRF NSP121M2D2ATRF NSP121M2D2XATRF NSP121M2D2ZATRF NSP151M2D2ATRF NSP151M2D2ZATRF NSP181M2D2ATRF NSP221M2D2ATRF NSP221M2D2ZATRF NSP271M2D4ATRF NSP271M2D4XATRF NSP331M2D3ATRF NSP331M2D3XATRF NSP331M2D3YATRF NSP331M2D4ATRF NSP331M2D4XATRF NSP391M2D3ATRF NSP391M2D3YATRF NSP391M2D4ATRF NSP391M2D4XATRF NSP391M2D4YATRF NSP471M2D4ATRF NSP471M2D3YATRF NSP471M2D4XATRF NSP471M2D4YATRF NSP561M2D4ATRF NSP561M2D4YATRF N/A NSP820M2.5D2ATRF NSP820M2.5D2XATRF NSP101M2.5D2ATRF NSP101M2.5D2XATRF NSP101M2.5D2ZATRF NSP121M2.5D2ATRF NSP121M2.5D2ZATRF NSP151M2.5D2ATRF NSP151M2.5D2ZATRF NSP221M2.5D3ATRF NSP221M2.5D3XATRF NSP221M2.5D3YATRF NSP221M2.5D4ATRF NSP221M2.5D4XATRF NSP271M2.5D3ATRF NSP271M2.5D3YATRF NSP271M2.5D4ATRF NSP271M2.5D4XATRF NSP331M2.5D4ATRF NSP331M2.5D4XATRF NSP331M2.5D4YATRF NSP391M2.5D4ATRF NSP391M2.5D4YATRF NSP471M2.5D4ATRF NSP471M2.5D4YATRF N/A N/A NSP560M4D2ATRF NSP560M4D2XATRF NSP680M4D2ATRF WV Cap. Max. LC (µA) Max. Ripple Current Max. ESR Height Tan δ +105°C & 100KHz (mArms) +20°C & 100KHz (Ω) H (Vdc) (µF) 240°C 260°C 2.0 2.5 4 68 100 100 100 120 120 120 150 150 180 220 220 270 270 330 330 330 330 330 390 390 390 390 390 470 470 470 470 560 560 56 82 82 100 100 100 120 120 150 150 220 220 220 220 220 270 270 270 270 330 330 330 390 390 470 470 39 47 56 56 68 8.1 8.4 9.3 11.3 - 20.0 20.0 20.0 24.0 24.0 24.0 30.0 30.0 36.0 26.4 44.0 54.0 54.0 66.0 66.0 66.0 66.0 66.0 78.0 78.0 78.0 78.0 78.0 94.0 94.0 94.0 94.0 112.0 112.0 20.5 20.5 25.0 25.0 25.0 30.0 30.0 37.5 37.5 55.0 55.0 78.0 55.0 55.0 67.5 78.0 67.5 67.5 82.5 82.5 82.5 97.5 97.5 117.5 117.5 22.4 22.4 27.2 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.06 0.06 0.06 0.06 0.06 2,000 2,500 2,700 3,000 2,500 2,700 3,000 2,500 3,000 2,500 2,500 3,000 3,300 3,500 3,000 3,300 3,400 3,300 3,500 3,000 3,400 3,300 3,500 3,700 3,300 3,400 3,500 3,700 3,300 3,700 2,000 2,500 2,700 2,500 2,700 3,000 2,500 3,000 2,500 3,000 3,000 3,300 3,400 3,300 3,500 3,000 3,400 3,300 3,500 3,300 3,500 3,700 3,300 3,700 3,300 3,700 2,000 2,000 2,500 2,700 2,500 0.028 0.018 0.015 0.009 0.018 0.015 0.009 0.018 0.009 0.018 0.018 0.009 0.012 0.010 0.015 0.012 0.009 0.012 0.010 0.015 0.009 0.012 0.010 0.007 0.012 0.009 0.010 0.007 0.012 0.007 0.028 0.018 0.015 0.018 0.015 0.009 0.018 0.009 0.018 0.009 0.015 0.012 0.009 0.012 0.010 0.015 0.009 0.012 0.010 0.012 0.010 0.007 0.012 0.007 0.012 0.007 0.028 0.028 0.018 0.015 0.018 1.1±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 4.2±0.1 4.2±0.1 2.8±0.2 2.8±0.2 2.8±0.2 4.2±0.1 4.2±0.1 2.8±0.2 2.8±0.2 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 2.8±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 1.1±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 2.8±0.2 2.8±0.2 2.8±0.2 4.2±0.1 4.2±0.1 2.8±0.2 2.8±0.2 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 1.1±0.1 1.1±0.1 1.8±0.1 1.8±0.1 1.8±0.1 Continue on next page 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSP Series Not Recommended for New Designs Note: The following parts are supported but not recommended for new designs NIC Part Number (Reflow 240°C) NIC Part Number (Reflow 260°C) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A NSP330M6.3D5TRF N/A N/A NSP560M6.3D2ZTRF N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A NSP181M6.3D4YTRF NSP181M6.3D4ZTRF N/A N/A N/A N/A NSP220M8D5TRF N/A N/A N/A N/A NSP101M8D4TRF N/A N/A N/A N/A NSP4R7M12.5D2TRF NSP100M12.5D2TRF NSP150M12.5D5TRF NSP150M12.5D2TRF NSP220M12.5D2TRF NSP2R2M16D2TRF NSP4R7M16D2TRF NSP680M4D2XATRF NSP820M4D2ATRF NSP820M4D2XATRF NSP820M4D2ZATRF NSP101M4D2ATRF NSP121M4D3ATRF NSP121M4D3XATRF NSP151M4D3ATRF NSP151M4D3XATRF NSP151M4D3YATRF NSP181M4D3ATRF NSP181M4D4ATRF NSP181M4D3YATRF NSP181M4D4XATRF NSP221M4D4ATRF NSP221M4D4XATRF NSP221M4D4YATRF NSP271M4D4ATRF NSP271M4D4YATRF NSP331M4D4ATRF NSP100M6.3D2ATRF NSP220M6.3D2ATRF NSP330M6.3D2ATRF N/A NSP470M6.3D2ATRF NSP470M6.3D2XATRF N/A NSP680M6.3D2ATRF NSP680M6.3D2XATRF NSP101M6.3D3ATRF NSP101M6.3D3XATRF NSP121M6.3D3ATRF NSP121M6.3D3XATRF NSP151M6.3D3ATRF NSP151M6.3D4ATRF NSP151M6.3D4XATRF NSP181M6.3D4ATRF NSP181M6.3D4XATRF N/A N/A NSP221M6.3D4ATRF NSP8R2M8D2ATRF NSP150M8D2ATRF NSP220M8D2ATRF N/A NSP330M8D2ATRF NSP470M8D2ATRF NSP680M8D3ATRF NSP101M8D3ATRF NSP101M8D4ATRF NSP151M8D4ATRF NSP220M10D2ATRF NSP330M10D2ATRF NSP390M10D2ATRF N/A N/A N/A N/A N/A N/A N/A WV Cap. Max. LC (µA) Max. Ripple Current Max. ESR Height Tan δ +105°C & 100KHz (mArms) +20°C & 100KHz (Ω) H (Vdc) (µF) 240°C 260°C 4.0 6.3 8.0 10 12.5 16 68 82 82 82 100 120 120 150 150 150 180 180 180 180 220 220 220 270 270 330 10 22 33 33 47 47 56 68 68 100 100 120 120 150 150 150 180 180 180 180 220 8.2 15 22 22 33 47 68 100 100 150 22 33 39 4.7 10 15 15 22 2.2 4.7 - 8.3 14.1 45.4 45.4 7.0 32.0 3.0 5.0 7.5 7.5 11.0 3.0 3.0 27.2 32.8 32.8 32.8 40.0 48.0 48.0 60.0 60.0 60.0 72.0 72.0 72.0 72.0 88.0 88.0 88.0 108.0 108.0 132.0 6.3 13.9 20.8 29.6 29.6 42.8 42.8 63.0 63.0 75.6 75.6 94.5 94.5 94.5 113.4 113.4 138.6 6.3 12.0 17.6 26.4 37.6 54.4 80.0 80.0 120.0 22.0 33.0 39.0 - 0.06 0.06 0.06 0.06 0.06 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.06 0.06 0.06 0.06 0.06 0.06 0.10 0.10 0.10 0.10 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 2,700 2,500 2,700 3,000 1,800 3,000 3,300 3,000 3,300 3,400 2,500 3,300 3,400 3,500 3,300 3,500 3,700 3,300 3,700 3,700 1,400 1,600 2,000 2,000 2,500 2,700 3,000 2,500 2,700 3,000 3,300 3,000 3,300 2,500 3,300 3,500 3,300 3,500 3,700 4,000 3,000 1,400 1,600 2,000 2,000 2,500 1,800 3,000 2,500 3,300 3,000 1,600 1,800 1,800 1,000 1,000 1,400 1,300 1,600 1,000 1,000 0.015 0.018 0.015 0.009 0.018 0.015 0.012 0.015 0.012 0.009 0.018 0.012 0.009 0.010 0.012 0.010 0.007 0.012 0.007 0.012 0.055 0.040 0.028 0.028 0.018 0.015 0.009 0.018 0.015 0.015 0.012 0.015 0.012 0.018 0.012 0.010 0.012 0.010 0.007 0.005 0.015 0.055 0.040 0.028 0.028 0.018 0.025 0.015 0.018 0.012 0.015 0.030 0.025 0.025 0.080 0.060 0.040 0.050 0.030 0.110 0.080 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 2.8±0.2 2.8±0.2 2.8±0.2 2.8±0.2 2.8±0.2 2.8±0.2 4.2±0.1 2.8±0.2 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.1±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 2.8±0.2 2.8±0.2 2.8±0.2 2.8±0.2 2.8±0.2 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 4.2±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.1±0.1 1.8±0.1 1.8±0.1 2.8±0.2 2.8±0.2 4.2±0.1 4.2±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.1±0.1 1.8±0.1 1.8±0.1 1.8±0.1 1.8±0.1 Continue on next page 7 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors NSP Series Not Recommended for New Designs Note: The following parts are supported but not recommended for new designs NIC Part Number (Reflow 240°C) NIC Part Number (Reflow 260°C) NSP6R8M16D2TRF NSP8R2M16D2TRF N/A N/A WV Cap. Max. LC (µA) Max. Ripple Current Max. ESR Height Tan δ +105°C & 100KHz (mArms) +20°C & 100KHz (Ω) H (Vdc) (µF) 240°C 260°C 16 6.8 8.2 4.4 5.2 - 0.06 0.06 RECOMMENDED 240°C REFLOW SOLDERING PROFILE 1,000 1,300 0.070 0.045 1.8±0.1 1.8±0.1 RECOMMENDED 260°C REFLOW SOLDERING PROFILE 10 Seconds Max. 250 240oC Max. 200 150 150°C ~ 200°C Time above 200°C 100 50 120 Seconds NATURAL COOLING 260oC Max. COMPONENT SURFACE TEMP. (oC) COMPONENT SURFACE TEMP. (oC) 5 Seconds Max. 250 230 200 150 150oC ~ 200°C PREHEAT 100 NATURAL COOLING 120 Seconds 50 Time (Seconds) Time (Seconds) DURATION ABOVE 200°C (FOR 240°C REFLOW PARTS) If Peak Soldering Temperature is 240°C, 5 seconds max. 230°C, 5 seconds max. Time above 230°C Maximum Time Above +200°C is 30 seconds 40 seconds DURATION ABOVE 230°C (FOR 260°C REFLOW PARTS) If Peak Soldering Temperature is 260°C, 10 seconds max. 255°C, 10 seconds max. 250°C, 10 seconds max. Maximum Time Above +230°C is 40 seconds 50 seconds 60 seconds Notes: 1. SAC alloy (+217°C) reflow soldering compatible 2. Soldering heat limits apply to the top surface of component 3. If you have concerns about your reflow soldering profile review them with NIC to insure compatible [[email protected]] 4. Two passes through the reflow process are allowed (cooling down period between process). 8 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors DIMENSIONS (mm) Case Code D2 ~ D6 L ±0.4 7.3 W ±0.3 4.3 H see values table W1 ±0.2 2.4 VOLTAGE CODES S ±0.3 1.3 Voltage 2.0Vdc 2.5Vdc 4.0Vdc 6.3Vdc 8Vdc 10Vdc 12.5Vdc 16Vdc W1 S L H W Code D E G J K A B C PART MARKING Date Code Capacitance (μF) 10 RECOMMENDED LAND PATTERNS (mm) Case Code D2 ~ D6 NSP Series A 2.8 B 4.0 J 64721 C 8.8 Anode Polarity Indicator Voltage Code A B C Please note the NSP series will fit on standard “D” and “E” size (7343) tantalum chip capacitor land patterns CARRIER Tape Dimensions (mm) Case A±0.2 B±0.2 E±0.1 F±0.1 Po±0.1 P1±0.1 t±0.2 W±0.3 Dφ Code 1.5 D5 D2, D6 2.4 4.0 8.0 12.0 7.7 4.6 1.5 +0.1 5.50 1.75 D3 3.5 D4 4.3 Reel Dimensions (mm) A±2.0 330 B min. 80 C±0.5 13.0 D±0.8 21.0 E±0.5 2.0 T±1.0 20.0 t 3.0 W±1.0 14 T E C B D R:1.0 A 9 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com Case Code D5, D6, D2 D3, D4 Reel Quantity 3,500 2,000 W t www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com