Hybrid Aluminum Electrolytic Capacitors NSPRH Series HIGH TEMPERATURE, EXTENDED LOAD LIFE, RADIAL LEADS, POLARIZED FEATURES • IMPROVED ENDURANCE AT HIGH TEMPERATURE (up to 10,000HRS @ 105°C) • HIGH RIPPLE CURRENT RATINGS • REDUCED SIZES • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data * NEW * Long Life & High Ripple Current CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current After 2 minutes W.V. (Vdc) Max. Tan δ at 120Hz/20°C S.V. (Vdc) Tan δ Z-55°C/Z+20°C Low Temperature Stability Impedance Ratio @ 120Hz Z+105°C/Z+20°C 16V 25V ~ 100V ∆ Capacitance Load Life Test @ 105°C ∆ Tan δ ∆ LC ∆ ESR 16 ~ 100VDC 10 ~ 560µF -55°C ~ +105°C ±20% (M) 0.05CV or 100µA whichever is greater 16 20 25 32 35 44 40 50 50 63 63 79 80 100 100 125 0.16 1.0 ~ 2.5 0.6 ~ 1.0 f6.3: 3,000 hours, f8mm ~ 10mm: 7,000 hours f6.3: 5,000 hours, f8mm ~ 10mm: 10,000 hours Within ±30% of initial measured value Less than 200% of specified value Less than specified value Less than 200% of specified value PART NUMBER SYSTEM NSPRH 101 M 35V 8X9.5 Y F . RoHS Compliant Series Case Size (DφxL) Working Voltage (Vdc) Tolerance Code (M=20%) Capacitance Code: First 2 characters significant, third character is multiplier Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site. PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Miniature Aluminum Electrolytic Capacitors NSPRH Series STANDARD PRODUCT AND CASE SIZE TABLE DφxL (mm) Part Number NSPRH121M16V6.3X7.2YF NSPRH271M16V8x9.5YF NSPRH471M16V10X9.5YF NSPRH561M16V10X11.5YF NSPRH680M25V6.3X7.2YF NSPRH151M25V8x9.5YF NSPRH271M25V10X9.5YF NSPRH331M25V10X11.5YF NSPRH470M35V6.3X7.2YF NSPRH101M35V8X9.5YF NSPRH151M35V10x9.5YF NSPRH221M35V10X11.5YF NSPRH270M40V6.3X7.2YF NSPRH560M40V8X9.5YF NSPRH101M40V10X9.5YF NSPRH121M40V10X11.5YF NSPRH150M50V6.3X7.2YF NSPRH330M50V8X9.5YF NSPRH560M50V10X9.5YF NSPRH820M50V10X11.5YF NSPRH100M63V6.3X7.2YF NSPRH220M63V8X9.5YF NSPRH330M63V8X9.5YF NSPRH330M63V10X9.5YF NSPRH470M63V10X9.5YF NSPRH560M63V10X11.5YF NSPRH120M80V10X9.5YF NSPRH150M80V10X9.5YF NSPRH180M80V10X11.5YF NSPRH100M100V10X9.5YF NSPRH120M100V10X9.5YF NSPRH150M100V10X11.5YF Cap. (μF) 120 270 470 560 68 150 270 330 47 100 150 220 27 56 100 120 15 33 56 82 10 22 33 33 47 56 12 15 18 10 12 15 W.V. (Vdc) 16 25 35 40 50 63 80 100 Dissipation Factor Leakage Current Ripple Current Rating Max. ESR (mΩ) Load Life Hours +20°C/120Hz (mA) after 2 minutes (mA) +105°C/100KHz +20°C/100KHz @+105°C 0.16 100.0 1500 40 3,000 0.16 216.0 2000 26 7,000 0.16 376.0 2600 21 7,000 0.16 448.0 3000 15 7,000 0.16 100.0 1400 45 5,000 0.16 187.5 1900 27 10,000 0.16 337.5 2530 22 10,000 0.16 412.5 2900 16 10,000 0.16 100.0 1300 60 5,000 0.16 175.0 1800 30 10,000 0.16 262.5 2470 23 10,000 0.16 385.0 2830 17 10,000 0.16 100.0 1250 70 5,000 0.16 112.0 1750 32 10,000 0.16 200.0 2400 24 10,000 0.16 240.0 2750 18 10,000 0.16 100.0 1200 80 5,000 0.16 100.0 1670 35 10,000 0.16 140.0 2320 25 10,000 0.16 205.0 2650 19 10,000 0.16 100.0 1060 100 5,000 0.16 100.0 1560 40 10,000 0.16 104.0 1560 40 10,000 0.16 104.0 2100 30 10,000 0.16 148.1 2100 30 10,000 0.16 176.4 2400 22 10,000 0.16 100.0 1600 70 10,000 0.16 100.0 1600 70 10,000 0.16 100.0 1830 50 10,000 0.16 100.0 1450 80 10,000 0.16 100.0 1450 80 10,000 0.16 100.0 1660 60 10,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Frequency (Hz) 10mF ~ 33mF 47mF ~ 560mF 100 0.05 0.10 1K 0.32 0.35 10K 0.67 0.70 DIMENSIONS (mm) LEAD SPACING AND DIAMETER (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Spacing (F) Dim. α Dim. B 6.3 0.45 2.5 8 0.6 3.5 0.5 1.5 >100K 1.00 1.00 Laminated Case 10 0.7 5.0 + dφ ± 0.05 F ± 0.5 Top Vent 10mm Dia. L + β max. MARKING Series H24 100 35v 15mm Min. 5mm Min. Dφ ± α Date Code 2 = Year 2012 4 = month (1 - 9 Jan ~ Sept, O = Oct, N = Nov, D = Dec.) Capacitance Voltage PolaritY Marking 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com