Miniature Aluminum Electrolytic Capacitors NRE-SX Series LOW IMPEDANCE, SUBMINIATURE, RADIAL LEADS, POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS FEATURES • VERY LOW IMPEDANCE AT HIGH FREQUENCY • LOW PROFILE 7mm HEIGHT • WIDE TEMPERATURE, -55OC~ +105OC RoHS Compliant includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 1 minutes At +20°C Max. Tan δ @ 120Hz/+20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at Rated W.V. +105°C 1,000 Hours 6.3 ~ 35Vdc 0.47 ~ 330µF -55 ~ +105°C ±20%(M) 0.01CV or 3µA, whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ Z-40°C/Z+20°C Z-55°C/Z+20°C Capacitance Change Tan δ Leakage Current 6.3 10 16 25 35 8 13 20 32 44 0.24 0.20 0.18 0.14 0.12 3 2 2 2 2 5 4 4 3 3 Within ±25% of initial measured value Less than 200% of specified maximum value Less than specified maximum value STANDARD PRODUCT AND CASE SIZE TABLE Dφ x L (mm) Cap. (µF) Code 4.7 10 15 22 33 47 68 100 150 220 330 4R7 100 150 220 330 470 680 101 151 221 331 6.3 5x7 6.3x7 6.3x7 Working Voltage (Vdc) 10 16 25 4x7 4x7 5x7 4x7 5x7 5x7 5x7 6.3x7 5x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 6.3x7 - 35 4x7 5x7 6.3x7 6.3x7 6.3x7 6.3x7 - LEAD SPACING AND DIAMETER (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Spacing (F) Dim. α Dim. β 4 0.45 1.5 0.5 1.0 5 0.45 2.0 0.5 1.0 6.3 0.45 2.5 0.5 1.0 DIMENSIONS (mm) Polarity Marking Sleeve + dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α Drawing is representative of parts as supplied in bulk or straight lead format, please see taping specification for details on taped format packaging. PRECAUTIONS Please review the notes on correct use, safety and precautions found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Miniature Aluminum Electrolytic Capacitors NRE-SX Series STANDARD PRODUCTS, CASE SIZES AND SPECIFICATIONS Dφ x L (mm) Part Number Cap. (µF) NRE-SX470M6.3V5 x 7F NRE-SX221M6.3V6.3 x 7F NRE-SX331M6.3V6.3 x 7F NRE-SX220M10V4 x 7F NRE-SX330M10V5 x 7F NRE-SX470M10V5 x 7F NRE-SX101M10V6.3 x 7F NRE-SX151M10V6.3 x 7F NRE-SX221M10V6.3 x 7F NRE-SX150M16V4 x 7F NRE-SX220M16V5 x 7F NRE-SX470M16V6.3 x 7F NRE-SX101M16V6.3 x 7F NRE-SX151M16V6.3 x 7F NRE-SX221M16V6.3 x 7F NRE-SX100M25V4 x 7F NRE-SX150M25V5 x 7F NRE-SX220M25V5 x 7F NRE-SX330M25V6.3 x 7F NRE-SX470M25V6.3 x 7F NRE-SX680M25V6.3 x 7F NRE-SX101M25V6.3 x 7F NRE-SX4R7M35V4 x 7F NRE-SX100M35V5 x 7F NRE-SX150M35V6.3 x 7F NRE-SX220M35V6.3 x 7F NRE-SX330M35V6.3 x 7F NRE-SX470M35V6.3 x 7F 47 220 330 22 33 47 100 150 220 15 22 47 100 150 220 10 15 22 33 47 68 100 4.7 10 15 22 33 47 W.V. (Vdc) 6.3 10 16 25 35 Max. Tanδ Max. Impedance 100KHz/20°C 0.24 0.24 0.24 0.20 0.20 0.20 0.20 0.20 0.20 0.18 0.18 0.18 0.18 0.18 0.18 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.49 0.24 0.29 1.15 0.49 0.49 0.24 0.24 0.29 1.15 0.49 0.24 0.24 0.29 0.29 1.15 0.49 0.49 0.24 0.24 0.24 0.24 1.15 0.49 0.29 0.29 0.29 0.29 Max. Ripple Current at 100KHz/105°C (mA rms) 0.49 0.24 0.29 90 160 160 280 280 280 90 160 280 280 280 280 90 160 160 280 280 280 280 90 160 280 280 280 280 Load Life Hours @ +105°C 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Capacitance (μF) C < 47 Frequency 100Hz < F < 1KHz 1KHz < F < 10KHz 10KHz < F < 100KHz 0.40 0.80 0.90 100KHz < F 1.00 47 < C < 100 0.60 0.80 0.95 1.00 100 < C 0.75 0.85 0.95 1.00 Part Number System NRE-SX 220 M 35V 6.3x7 TB F RoHS Compliant TB = Tape & Box* Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code Series *see tape specification for details 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com