4/17/02 http:www.niccomp.com Technical Inquiries: [email protected] EIA TEMPERATURE COEFFICIENTS: CERAMIC CAPACITORS All ceramic capacitors are specified (and guaranteed) with regards to their capacitance value and tolerance at +25°C (Room Temperature; 77°F) All capacitors will change in capacitance value if their temperature departs from room temperature, as normally will occur through heating or cooling within an electronic circuit. THE GRAPH BELOW, SHOWS EXAMPLE OF CAPACITANCE VALUE CHANGE OVER TEMPERATURE The maximum allowable change in capacitance value over a specified operating temperature range is the Temperature Coefficient (TC) of the capacitor THE TABLE BELOW, SHOWS THE BREAKDOWN OF THE EIA THREE DIGIT "TC" CODES ISO 9002 REGISTERED 1 4/17/02 http:www.niccomp.com Technical Inquiries: [email protected] EIA Temperature Coefficients: Ceramic Capacitors Common "TC" desiginations include: X5R = ±15% change over -55°C~+85°C Standard Tolerance: K = ±10% X7R = ±15% change over -55°C~+125°C Standard Tolerance: K = ±10% Y5V = +22%/-82% change over -30°C~+85°C Standard Tolerance: Z = -20%/+80% Z5U = +22%/-56% change over -10°C~+85°C Standard Tolerance: M = ± 20% Exception to the above system is Ultra-Stable "TC": COG = NPO NPO = 0±30PPM/°C over -55°C ~ + 125°C ...Standard Tolerance: J = ±5% NPO = Negative Positive Zero [Originated from Military Standards] Component Characteristics Substitution Guide: "TC" - Temperature Coefficient : (Ceramic Capacitors) Substitution Rule: A component with a more stable (better) temperature coefficient (TC) can replace a less temperature stable TC component. i.e...an X7R ceramic can replace X5R, Z5U or Y5V ceramic part i.e...an NPO ceramic can replace a X5R, X7R, Z5U or Y5V ceramic Temperature Characteristic Curves: NPO (COG) = 0±30PPM/ºC over -55ºC ~ +125ºC ISO 9002 REGISTERED 2 4/17/02 http:www.niccomp.com Technical Inquiries: [email protected] EIA Temperature Coefficients: Ceramic Capacitors X7R = ±15% over -55ºC ~ +125ºC Y5V = +22%/-82% change over -30°C ~ +85°C ISO 9002 REGISTERED 3 4/17/02 http:www.niccomp.com Technical Inquiries: [email protected] EIA Temperature Coefficients: Ceramic Capacitors Z5U = +22%/-56% change over -10°C ~ +85°C Additional Information & Resources: § EIA-521… APPLICATION GUIDE FOR MULTILAYER CERAMIC CAPACITORS - ELECTRICAL § EIA-198-2-E … TEST METHODS CERAMIC CAPACITORS § NIC MLCC GUIDELINES: o Measurement of High Capacitance MLCC o Voltage Coefficients: NPO , X7R , Y5V o Aging Characteristics o Test Conditions ISO 9002 REGISTERED 4