Large Can Aluminum Electrolytic Capacitors FEATURES • LOW PROFILE (20mm HEIGHT) • EXTENDED TEMPERATURE RATING +105°C • LOW DISSIPATION FACTOR AND LOW ESR • HIGH RIPPLE CURRENT • WIDE CV SELECTION • SUITABLE FOR SWITCHING POWER SUPPLIES RoHS Compliant includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS Operating Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Max. Leakage Current (µA) After 5 minutes (20°C) W.V. (Vdc) Max. Tan δ at 120Hz/20°C Tan δ max. W.V. (Vdc) S.V. (Vdc) Surge Voltage W.V. (Vdc) S.V. (Vdc) Frequency (Hz) Ripple Current 16 ~ 100Vdc Multiplier at Correction Factors 105°C 160 ~ 400Vdc Temperature (°C) Low Temperature Capacitance Change Stability (16 to 250Vdc) Impedance Ratio Capacitance Change Load Life Test Tan δ 2,000 hours at +105°C Leakage Current Capacitance Change Shelf Life Test 1,000 hours at +105°C Tan δ (no load) Leakage Current Surge Voltage Test Capacitance Change Per JIS-C-5141 (table #6, #4) Tan δ Surge voltage applied: 30 seconds Leakage Current "On" and 5.5 minutes no voltage "Off" Capacitance Change Soldering Effect Refer to Tan δ MIL-STD-202F Method 210A Leakage Current NRLFW Series -40 ~ +105°C 16 ~ 250Vdc 68 ~ 10,000µF ±20% (M) 3x -25 ~ +105°C 400Vdc 33 ~ 100µF C(µF)V 16 0.45 16 20 160 220 50 0.93 0.75 0 -5% 1.5 25 35 50 63 80 100 ~ 400 0.35 0.30 0.25 0.20 0.17 0.15 25 35 50 63 80 100 32 44 63 79 100 125 200 250 400 400 250 300 400 450 60 100 120 500 1K 10K ~ 50K 0.95 0.99 1.00 1.05 1.08 1.15 0.80 0.95 1.00 1.20 1.25 1.40 -25 -40 -10 -30% 3 9 Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±10% of initial measured value Less than specified maximum value Less than specified maximum value MECHANICAL CHARACTERISTICS: *NON-STANDARD VOLTAGES FOR THIS SERIES 1. Pressure Vent: The capacitors are provided with a pressure sensitive safety vent on the top of can. The vent is designed to rupture in the event that high internal gas pressure is developed by circuit malfunction or mis-use like reverse voltage. Sleeve 10.0 Recommended PC Board Mounting Holes: ∅= 2 ± 0.1 Terminal (t=0.8) Max. 2.0 4.0 Minus Polarity Marking 6.3 ± 1.0 2. Terminal Strength: Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period of 30 seconds. 10 ± 0.1 Sleeve Color: Dark Blue D∅ ± 0.5 ∅d ± 1.0 Can Top Vent L ± 2.0 Max. 1.5 Top of Spin 6.3 ± 1.0 (4.0mm Leads Available As Option) PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Large Can Aluminum Electrolytic Capacitors NRLFW Series STANDARD PRODUCT LIST, CASE SIZE AND SPECIFICATIONS Part Number Cap (µF) NRLFW332M16V22X20F NRLFW472M16V25X20F NRLFW682M16V30X20F NRLFW103M16V35X20F NRLFW222M25V22X20F NRLFW332M25V25X20F NRLFW472M25V30X20F NRLFW682M25V35X20F NRLFW152M35V22X20F NRLFW222M35V25X20F NRLFW332M35V30X20F NRLFW472M35V35X20F NRLFW102M50V22X20F NRLFW152M50V25X20F NRLFW222M50V30X20F NRLFW332M50V35X20F NRLFW681M63V22X20F NRLFW102M63V25X20F NRLFW152M63V30X20F NRLFW222M63V35X20F NRLFW471M80V22X20F NRLFW681M80V25X20F NRLFW102M80V30X20F NRLFW152M80V35X20F NRLFW331M100V22X20F NRLFW471M100V25X20F NRLFW681M100V30X20F NRLFW102M100V35X20F NRLFW151M160V22X20F NRLFW221M160V25X20F NRLFW331M160V30X20F NRLFW471M160V35X20F NRLFW101M200V22X20F NRLFW151M200V25X20F NRLFW221M200V30X20F NRLFW331M200V35X20F NRLFW680M250V22X20F NRLFW101M250V25X20F NRLFW151M250V30X20F NRLFW221M250V35X20F NRLFW330M400V22X20F NRLFW470M400V25X20F NRLFW680M400V30X20F NRLFW101M400V35X20F 3,300 4,700 6,800 10,000 2,200 3,300 4,700 6,800 1,500 2,200 3,300 4,700 1,000 1,500 2,200 3,300 680 1,000 1,500 2,200 470 680 1,000 1,500 330 470 680 1,000 150 220 330 470 100 150 220 330 68 100 150 220 33 47 68 100 W.V. 16 25 35 50 63 80 100 160 200 250 400 Case Size 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 ESR (Ω @ 20°C) Max. Ripple Current (Arms@105°C) 120Hz 20KHz 120Hz 10K ~ 50KHz 0.216 0.152 0.105 0.071 0.241 0.161 0.113 0.080 0.267 0.196 0.131 0.095 0.265 0.177 0.121 0.085 0.463 0.315 0.210 0.143 0.459 0.317 0.216 0.155 0.653 0.459 0.317 0.216 1.437 0.098 0.553 0.459 1.989 1.326 0.904 0.603 2.926 1.989 1.326 0.904 5.024 3.527 2.438 1.658 0.173 0.121 0.084 0.057 0.181 0.121 0.085 0.060 0.216 0.140 0.098 0.071 0.199 0.133 0.089 0.064 0.347 0.236 0.157 0.107 0.298 0.206 0.140 0.108 0.392 0.275 0.190 0.129 0.647 0.441 0.249 0.208 0.895 0.597 0.407 0.271 1.463 0.995 0.663 0.452 1.758 1.235 0.853 0.580 1.30 1.60 1.80 2.40 1.30 1.60 1.80 2.30 1.10 1.40 1.70 2.00 0.90 1.20 1.40 1.70 0.90 1.20 1.30 1.50 0.80 1.00 1.20 1.40 0.80 1.00 1.10 1.20 0.55 0.75 1.00 1.15 0.50 0.65 0.87 1.10 0.40 0.50 0.65 0.87 0.20 0.25 0.35 0.47 1.50 1.84 2.07 2.76 1.50 1.84 2.07 2.65 1.27 1.61 1.96 2.30 1.04 1.38 1.61 1.96 1.04 1.38 1.50 1.70 0.92 1.15 1.38 1.61 1.20 1.50 1.65 1.80 0.77 1.05 1.40 1.61 0.70 0.91 1.22 1.54 0.56 0.70 0.91 1.22 0.28 0.35 0.49 0.66 PART NUMBER SYSTEM NRLFW 102 M 50V 22X20 F Series 2 NIC COMPONENTS CORP. www.niccomp.com RoHS compliant Case Size (mm) Voltage Rating Tolerance Code Capacitance Code www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com