OV2665 2 megapixel product brief lead free available in a lead-free package DSC-Quality Imaging in a 2 Megapixel Sensor The 1/5" 2 megapixel OV2665 system on chip (SoC) featuring 1.75 µm OmniBSI™ (backside illumination) technology, delivers a number of performance improvements over competing front-side illumination (FSI) sensors, including increased sensitivity per unit area, improved quantum efficiency, reduced crosstalk, and photo response non-uniformity, which all lead to significant improvements in image quality. Designed specifically to address consumer demand for digital still camera (DSC) quality imaging in a mobile phone, the OV2665 combines the industry's best low-light sensitivity at >1400 mV/(lux - sec) and a 2x improvement in signal-to-noise ratio (70 lux), with the industry's lowest stack height – ideal for today's ultra-slim mobile phones. The OV2665 SoC provides automatic real time image processing with parallel (DVP) or single lane MIPI interface and supports 2 x 2 binning and sub-sampling down to any arbitrary resolution. Automatic image control features and high frame rates for video encoding deliver vivid still and video images, even in the most challenging lighting conditions. The highly integrated OV2665 incorporates an advanced image signal processor (ISP) with features such as lens correction, auto exposure, auto white balance, and auto flicker. With two separate phase-locked loop outputs, the MIPI clock can be tuned independently of the internal clock. No other 2 megapixel sensor delivers the image quality of the OV2665. Find out more at www.ovt.com. TM OV2665 Applications ¬ Mobile Phones ¬ PC Multimedia ¬ Games and Toys Ordering Information Product Features ¬ OV02665-A60A (color, lead-free, 60-pin CSP3) ¬ 1.75 µm OmniBSI technology ¬ support for images sizes: UXGA, and any arbitrary size scaling down from SXGA ¬ industry's best low light sensitivity ¬ 2x improvement (over 1.75 µm FSI) in light level required to achieve 10:1 signal-to-noise ratio (< 70 lux) ¬ industry's lowest stack height Product Specifications ¬ support for video operations ¬ support for horizontal and vertical sub-sampling, binning ¬ support for LED and flash strobe mode ¬ ultra low power and low cost ¬ automatic image control functions: - automatic exposure control (AEC) - automatic white balance (AWB) - automatic band filter (ABF) - automatic 50/60 Hz luminance detection - automatic black level calibration (ABLC) ¬ standard serial SCCB interface ¬ digital video port (DVP) parallel output interface ¬ image quality controls: color saturation, hue, gamma, sharpness (edge enhancement), lens correction, defective pixel canceling, and noise canceling ¬ support for output formats: RAW RGB, RGB565/555, YUV422/420 and YCbCr422 ¬ dynamic range: 67 dB ¬ power supply: - core: 1.5 VDC ±5% - analog: 2.45~3.0 V - I/O: 1.7~3.0 V ¬ maximum image transfer rate: - UXGA (1600 x 1200): 15 fps (and any size scaling down from UXGA) - SVGA (800 x 600): 30 fps (and any size scaling down from SVGA) ¬ power requirements: - active: 250 mW - standby: 70 µA ¬ MIPI serial output interface ¬ programmable controls for frame rate, AEC/AGC 16-zone size/position/ weight control, mirror and flip, scaling, and windowing ¬ active array size: 1624 x 1212 ¬ S/N ratio: 37 dB ¬ sensitivity: 1400 mV/(lux - sec) ¬ temperature range: - operating: -20° C to 70° C - stable image: 0° C to 50° C ¬ support for second camera sharing ISP and MIPI interface ¬ embedded one-time programmable (OTP) memory ¬ fixed pattern noise (FPN): 1% of VPEAK-TO-PEAK ¬ output format (8-bit): - YUV(422/420) - YCbCr422 - RGB565/555 - 8/10-bit RAW RGB data ¬ on-chip phase lock loop (PLL) ¬ programmable I/O drive capability ¬ shutter: rolling shutter ¬ maximum exposure interval: 1235 x trow ¬ pixel size: 1.75 µm x 1.75 µm ¬ lens size: 1/5" ¬ support for black sun cancellation ¬ image area: 2820 µm x 2120 µm ¬ chief ray angle: 25.7° non-linear ¬ built-in voltage regulator for DVDD ¬ package dimensions: - CSP3: 4835 µm x 4945 µm ¬ input clock frequency: - PLL: 6~27 MHz - PLL bypass mode: 6~54 MHz ¬ suitable for module size of 6.5 x 6.5 mm Functional Block Diagram OV2665 50/60 Hz auto detection DVP FIFO 10-bit RAW DSP 10-bit A/D AMP digital gain image array black level calibration row select column sample/hold image output interface D[9:0] MIPI image sensor processor formatter image sensor core MCP/N MDP/N gain control control register bank 4275 Burton Drive Santa Clara, CA 95054 USA MDP MDN MCP MIPI control interface MCN SIO_C external sensor input PCLK HREF VSYNC STROBE PWDN Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com SIO_D SCCB slave interface timing generator and system control logic RESETB XVCLK PLL OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and OmniPixel are registered trademarks of OmniVision Technologies, Inc. The OmniVision logo and OmniBSI are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. TM Version 1.0, June, 2009