LVC Series Low Value Chip Ohmite’s LVC Series low value chip resistors are ideal for today’s current sense applications requiring low profile, low cost solutions. Available in 0.5, 0.75, and 1 watt sizes, footprints are 1206, 2010, and 2512 size respectively. These resistors are offered in ohmic ranges from 0.10 to 4.7 ohms in standard 1% and 2% in E12 values depending on value. The LVC Series resistors are well suited for a variety of industrial and commercial applications. Appl i c a t i o n s F e at u r e s • Switching Power Supplies • Cellular • Telecom and Wireless • Computer • RF • Industry Standard Sizes • Terminal Barrier Resists Ag Migration • Working Temperature Range is from -40°C to +125°C • Designed for Automatic Insertion S ERIE S S P E C IFI C ATION S Power Max. Series Rating Current LVC06 0.5W 32A LVC20 0.75W 40A LVC25 1.0W 45A * E-12 values and 20, 25, 50 Resistance Range* 10m-15m 18m-27m 33m-47m 50m- 4.7 10m-15m 18m-27m 33m-47m 50m- 4.7 10m-15m 18m-27m 33m-47m 50m- 4.7 c h a r a c t e r i s t i cs Substrate Alumina 96% Resistor Thick Film, Ni-Cr Alloy Electrode Sn, Ni, Cu Coating Epoxy resin Max. Working Volts V = √PR (P = Rated Watts, R = Resistance Value) Derating 100% @ 70°C, Derates Linearly to Zero @ 125°C Operating temp. -40℃ ~ +125℃ range Soldering The recommended soldering condition for both reflow and wave soldering is as follows: Preheating: 150° ~ 180°C 60 ~ 120 sec. Soldering: min. 230°C 30 ~ 40 sec. Max. temp.: max. 260°C max. 10 sec. TCR ppm/°C 500 350 200 100 500 350 200 100 500 350 200 100 Resistance Tolerance 10mΩ ~ 22mΩ 2% 27mΩ ~ 4.7Ω 1% P e r f o r m a n c e d ata Moisture 60℃±2℃, 90%~95% RH, resistance Rated voltage 1.5h ON, 0.5h OFF, 1000h Temperature -40℃ (30min.)/+125℃ Cycle (30min.), 5 cycles ±(0.5%+0.0005Ω) Short Time Rated voltage x 2.5 for 5s Overload ±(0.5%+0.0005Ω) Endurance 70℃±3℃, Rated voltage 1.5h ON, 0.5h OFF, 1000h ±(0.5%+0.0005Ω) Resistance to 260℃±5℃ for 10±1s Solder Heat Terminal Bending width: 2mm for strength 10s±1s, Glass epoxy substrate with thickness of 1.6mm Solderability 245℃±5℃ for 3s±0.5s Max. (A) Time applied: max. Overload 10msec Interval: min. 60sec Current 10 ±(0.5%+0.0005Ω) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] ±(0.5%+0.0005Ω) ±(0.5%+0.0005Ω) Min. 90% coverage LVC06 LVC20 LVC25 I=√(32/R) I=√(50/R) I=√(64/R) LVC Series Low Value Chip dimensions (mm) L Protective Resistor coating W Substrate Electrode a a Ag-Pd terminal Size L ±0.2 W ±0.2 t ±0.15 a ±0.15 LVC06 (EIA size 1206) 3.2 1.6 0.5 1.0 5.0 2.5 0.5 1.7 6.4 3.2 0.5 2.0 LVC20 (EIA size 2010) LVC25 (EIA size 2512) Nickel barrier t 100% Sn solder Land Pattern Land pattern dimensions are for reference only N M L O Size M N O L LVC06 0.146 0.040 0.080 0.066 LVC25 0.288 0.068 0.150 0.152 LVC20 0.229 0.056 0.120 0.117 R e e l sp e c i f i c a t i o n s 5,000 pc/reel 13 ±1.4 (LVC06) 15 ±1.4 (LVC20, 25) 2 ±.5 13 ±.2 180 ±3 60 ±1 9 ±.3 (LVC06) 13 ±.3 (LVC20, 25) O r d e r i n g i n f o r m at i o n RoHS Compliant LVC06FR560EV Low Value Case Size Chip Series 06 = 1206 20 = 2010 25 = 2512 Tolerance Ohms Taping Code F = 1% R249 = 0.249 blank = bulk package V = reel taped G = 2% 1R00 = 1.0 Ohm range Tol. Available Ohm Values 0.027 ~ 4.7 1% 0.027, 0.033, 0.039, 0.047, 0.050, 0.056, 0.068, 0.082, 0.10, 0.12, 0.15, 0.18, 0.20, 0.22, 0.25, 0.27, 0.33, 0.39, 0.47, 0.50, 0.56, 0.68, 0.82, 1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.5, 2.7, 3.3, 3.9, 4.7 0.010 ~ 0.0222% 0.010, 0.012, 0.015, 0.018, 0.020, 0.022 Only E12 values plus 20, 25, 50 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] 11