HD74AC366 Hex Inverter Buffer with 3-State Output REJ03D0270–0200Z (Previous ADE-205-391 (Z)) Rev.2.00 Jul.16.2004 Features • 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers • Outputs Source/Sink 24 mA • Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74AC366FPEL SOP-16 pin (JEITA) FP-16DAV FP EL (2,000 pcs/reel) HD74AC366RPEL SOP-16 pin (JEDEC) FP-16DNV RP EL (2,500 pcs/reel) Notes: 1. Please consult the sales office for the above package availability. 2. The packages with lead-free pins are distinguished from the conventional products by adding V at the end of the package code. Pin Arrangement OE1 1 16 VCC I 2 15 OE2 O 3 14 I I 4 13 O O 5 12 I I 6 11 O O 7 10 I GND 8 9 (Top view) Rev.2.00, Jul.16.2004, page 1 of 5 O HD74AC366 Logic Symbol OE1 OE2 I O Pin Names OE1, OE2 I O 3-State Output: Enable Input (Active Low) Inputs Outputs Truth Table Inputs Output OE1 OE2 I O L L L H L X L H H X L Z X X Z H H L X Z : : : : High Voltage Level Low Voltage Level Immaterial High Impedance Absolute Maximum Ratings Supply voltage Item Symbol VCC Ratings –0.5 to 7 V Unit Condition DC input diode current IIK –20 20 mA mA VI = –0.5V VI = Vcc+0.5V DC input voltage DC output diode current VI IOK –0.5 to Vcc+0.5 –50 V mA VO = –0.5V DC output voltage VO 50 –0.5 to Vcc+0.5 mA V DC output source or sink current DC VCC or ground current per output pin IO ICC, IGND ±50 ±50 mA mA Storage temperature Tstg –65 to +150 °C VO = Vcc+0.5V Recommended Operating Conditions Item Symbol Ratings Unit Supply voltage Input and Output voltage VCC VI, VO 2 to 6 0 to VCC V V Operating temperature Input rise and fall time (except Schmitt inputs) VIN 30% to 70% VCC Ta tr, tf –40 to +85 8 °C ns/V Rev.2.00, Jul.16.2004, page 2 of 5 Condition VCC = 3.0V VCC = 4.5 V VCC = 5.5 V HD74AC366 DC Characteristics Item Input Voltage Symbol VIH VIL Output voltage VOH VOL Ta = 25°°C Vcc (V) 3.0 min. 2.1 typ. 1.5 max. — Ta = –40 to +85°°C min. max. 2.1 — 4.5 5.5 3.15 3.85 2.25 2.75 — — 3.15 3.85 — — 3.0 4.5 — — 1.50 2.25 0.9 1.35 — — 0.9 1.35 5.5 3.0 — 2.9 2.75 2.99 1.65 — — 2.9 1.65 — 4.5 5.5 4.4 5.4 4.49 5.49 — — 4.4 5.4 — — 3.0 4.5 2.58 3.94 — — — — 2.48 3.80 — — 5.5 3.0 4.94 — — 0.002 — 0.1 4.80 — — 0.1 4.5 5.5 — — 0.001 0.001 0.1 0.1 — — 0.1 0.1 3.0 4.5 — — — — 0.32 0.32 — — 0.37 0.37 Unit V Condition VOUT = 0.1 V or VCC –0.1 V VOUT = 0.1 V or VCC –0.1 V V VIN = VIL or VIH IOUT = –50 µA VIN = VIL or VIH IOH = –12 mA IOH = –24 mA IOH = –24 mA VIN = VIL or VIH IOUT = 50 µA VIN = VIL or VIH IOL = 12 mA IOL = 24 mA Input leakage current IIN 5.5 5.5 — — — — 0.32 ±0.1 — — 0.37 ±1.0 µA VIN = VCC or GND 3 State current IOZ 5.5 — — ±0.5 — ±5.0 µA IOLD 5.5 — — — 86 — mA VIN(OE) = VIL, VIH VIN = VCC or GND VOUT = VCC or GND VOLD = 1.1 V IOHD ICC 5.5 5.5 — — — — — 8.0 –75 — — 80 mA µA VOHD = 3.85 V VIN = VCC or ground Dynamic output current* Quiescent supply current IOL = 24 mA *Maximum test duration 2.0 ms, one output loaded at a time. AC Characteristics Ta = +25°C CL = 50 pF Ta = –40°C to +85°C CL = 50 pF tPLH VCC (V)*1 Min 3.3 1.0 Typ 7.0 Max 9.0 1.0 Max 10.0 ns tPHL 5.0 3.3 1.0 1.0 5.0 7.0 7.0 9.0 1.0 1.0 7.5 10.0 ns Enable time tZH 5.0 3.3 1.0 1.0 4.5 9.0 7.0 13.0 1.0 1.0 7.5 13.5 ns Enable time tZL 5.0 3.3 1.0 1.0 7.0 10.0 9.5 12.5 1.0 1.0 10.0 13.5 ns Disable time tHZ 5.0 3.3 1.0 1.0 7.5 9.5 9.5 12.0 1.0 1.0 10.0 12.5 ns tLZ 5.0 3.3 1.0 1.0 7.5 9.0 10.0 12.5 1.0 1.0 10.5 13.5 ns 5.0 1.0 7.0 10.0 1.0 10.5 Item Propagation delay Propagation delay Disable time Note: Symbol 1. Voltage Range 3.3 is 3.3 V ± 0.3 V Voltage Range 5.0 is 5.0 V ± 0.5 V Rev.2.00, Jul.16.2004, page 3 of 5 Min Unit HD74AC366 Capacitance Item Input capacitance Power dissipation capacitance Rev.2.00, Jul.16.2004, page 4 of 5 Symbol CIN CPD Typ 4.5 40.0 Unit pF pF Condition VCC = 5.5 V VCC = 5.0 V HD74AC366 Package Dimensions As of January, 2003 Unit: mm 10.06 10.5 Max 9 1 8 1.27 *0.40 ± 0.06 0.20 7.80 +– 0.30 1.15 0 ˚ – 8˚ 0.10 ± 0.10 0.80 Max *0.20 ± 0.05 2.20 Max 5.5 16 0.70 ± 0.20 0.15 0.12 M Package Code JEDEC JEITA Mass (reference value) *Ni/Pd/Au plating FP-16DAV — Conforms 0.24 g As of January, 2003 Unit: mm 9.9 10.3 Max 9 1 8 0.635 Max *0.40 ± 0.06 0.15 *0.20 ± 0.05 1.27 0.11 0.14 +– 0.04 1.75 Max 3.95 16 0.10 6.10 +– 0.30 1.08 0˚ – 8˚ + 0.67 0.60 – 0.20 0.25 M *Ni/Pd/Au plating Rev.2.00, Jul.16.2004, page 5 of 5 Package Code JEDEC JEITA Mass (reference value) FP-16DNV Conforms Conforms 0.15 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0