OBSOLETE K1100BA Series 5V Crystal Clock Oscillators K1100BA, K1150BA, K1125BA, K1110BA Series 14 pin DIP, 4-pin 5.0 Volt, Clock Oscillator K1100BA Series Package, Compatible with 14-pin DIL 1.0MHz to 70MHz Frequency Range THIS PRODUCT IS NOT RECOMMENDED5V FOR NEW DESIGNS. Crystal Clock Oscillators HCMOS Circuit, TTL/CMOS Compatible PLEASE REFER TO THE MHO+ PRODUCT SERIES. Tight Symmetry 4-pin Package, Compatible with(45/55%) 14-pin DILAvailable Tri-State OptionRange Available 1.0MHz to 70MHz Frequency ±100ppm Stability Standard HCMOS Circuit, TTL/CMOS Compatible ±100ppm Stability Standard Tight Symmetry (45/55%) Available Tighter Stabilities Available Tri-State Option Available ±10ppm Stability:- K1110BA ±25ppm Stability:- K1125BA Tighter Stabilities Available ±50ppm Stability:- K1150BA ±10ppm Stability:- K1110BA ±25ppm Stability:- K1125BA ±50ppm Stability:- K1150BA E L E C T R I C A L S P E C I F I C AT I O N S E L E C T RK1100BA I C A L S P E C I FK1150BA I C AT I O N S MODEL Frequency Range (MHz) MODEL Frequency Stability (ppm) K1150BA K1100BA Frequency Range (MHz) 0°C to 70°C 0°C to 70°C -40°C to 85°C K1110BA Rating Over Temperature Only Inclusive of calibration, temperature, voltage, load, shock,vibration, aging -40°C to 85°C Temperature Range (°C) Storage K1125BA Rating Over Temperature±25 Only Inclusive of calibration, temperature, voltage, load, ±50 ±100 aging shock,vibration, ±100 ±50 ±150 ±25 ±100 ±150 ±100 NA Temperature RangeOperating (°C) Operating K1110BA 1.0 to 70 Frequency StabilityOverall (ppm) Overall K1125BA 1.0 to 70 -55°C to +125°C -55°C to +125°C Supply Voltage (V) Supply Voltage (V) +5.0 ±10% +5.0 ±10% Supply Supply Current (mA) Current (mA) N/A -40°C to +85°C -40°C to +85°C Storage ±10 ±10 NA N/A <20MHz <20MHz 15 15 20 - 70 MHz 20 - 70 MHz 50 50 Output TTL Output TTL Symmetry 40/60% @ 1.4V; 45/55% Optional 40/60% @ 1.4V; 45/55% Optional Symmetry TR and TF (ns) TR and TF (ns) Fanout (TTL) Output CMOS 20MHz =8; > 20MHz = 6 Fanout (TTL) Output CMOS Symmetry TR Start up Time (ms) 10 40/60 @ 0.5VCC Symmetry TR and TF (ns) 20MHz =8; > 20MHz = 6 10 20MHz =10; > 20MHz = 8 and TF (ns) 40/60 @ 0.5VCC 20MHz =10; > 20MHz = 8 <10 Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E K11XXBACXXX - Specify Frequency PART NUMBERING PA R T N U M B E R IGUIDE NG GUIDE “Blank” = 0oC to 70oC Operating Temperature - Specify Frequency K11XXBACXXX K11XXBACXXX-R - Specify Frequency “M” = -40oC to 85oC Operating Temperature “Blank” = 0oC to 70oC Operating Temperature “-R” = RoHS Compliant “Blank” = Fixed Frequency oC to 85oC Operating Temperature “M” = -40 = Non-RoHS Compliant “E” “Blank” = Tri-State “Blank” Fixed Frequency “Blank” = 40/60% “Blank” = 0°CSymmetry to 70°C=Operating Temperature “S” “M” = 45/55 Symmetry = Tri-State = -40°C to“E” 85°C Operating Temperature “C” = CMOS Output“Blank” = 40/60% Symmetry “Blank” = Fixed Frequency Model Selection: See Above “S”Table = 45/55 Symmetry 2553 N. Edgington Street, Franklin Park, IL “E” = Tri-State “C” = CMOS Output “Blank” = 40/60% Symmetry 60131 Phone:Model 847.451.1000 Fax: Table 847.451.7585 Selection: See Above “S” = 45/55% Symmetry 800-888-1499 or “C” www.champtech.com = CMOS Output 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Model Selection: See Table Above 1 Fax: 847.451.7585 MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 800-888-1499 or www.champtech.com Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 1 Revision: 03-01-07 OBSOLETE K1100BA, K1150BA, K1125BA, K1110BA Series K1100BA Series 14 pin DIP, 5.0 Volt, Clock Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. 5V Crystal Clock Oscillators PLEASE REFER TO THE MHO+ PRODUCT SERIES. PIN FUNCTION 1 N/C / Tri-State 2 Ground 3 Output 4 + VCC SHIPPING TUBE CROSS SECTION TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com 2 Revision: 03-01-07